Haier H2F-220WSAA User manual

Models:
H2F-220WSAA
H2F-220SF
H2F-220WF
H2F-220WFUK
H2F-228WF
H2F-320WF
H2F-320SF

FUNCTIONECO2:Whenthetemperatureissetwithinarangefrom-23 Cto-26 C,afterthe
freezerhasrunfor56 hours,itwillautomaticallybesetat-22 C,inordertosaveenergyand to
effectivelypreservefood.Ordinaryfoodcanbe effectivelypreserved at-18 Corbelow,settingthe
temperaturetoolowincreaseselectricityconsumption.(Thisfunction doesnotneedtobemanually
When thescreenislocked,thebuttonA2isnoteffective;justthe ChildLock functioniconisenabled
when theA3buttonispressed,thentheA4buttonpowerfunction isdisabled.
Atthistimepleasecheckasperthe followingprocedures: (1) Whetherthedoorclosesand opens
well; (2)Whetherthedoorisfrequentlyopened,oritisopenedfortoolong atatime;(3)Too much
food isputinatatime;if the aboveconditions existyoucancancelthe alarm.Until thetemperature
inside the freezerdropsto0 Corbelow, thedisplayed HH willdisappear.

12
)
1
1.1
cover on theright side,then separatetheterminal
connectedto thetopofthehinge
1.2
Useacrosshead screwdriver toloosen thehinge
screws.Remove theupper hinge
1.3
Move thedoor assemblyupwardtoremovethedoor
assembly
2
2.1
cover on theleftsideofthecabinet.Installit intothe
holeontherightsideofthecabinet.
2.2
Remove thecoverplateon thefront ofthecabinet
thenpullthesignalwiretotheleft sideof thecabinet
2.3
Put thesignalwireinto thegroove in thefront cover
plate, andfastenit with thefront coverplate
3
3.1
Dismantlethehingeshaft sleeveontherightside
andthecover on theleft side ofthedoor
3.2
Press thesignal wireon theright sideofthedoor into
thegroove inthedecorativestrip, and closethe
cover.
3.3
Pullout thesignalwirefrom the groovein theleft
sideofthedoor,andpushit into thehingeshaft
sleeve,thenput it into thedecorativestrip
4
4.1
Dismantle themetalstoppercross-pieceontheright
(Graphical representationin instruction booklet
last page.)
sideofthe doorassembly, then install it inthecorre
( & ).
-
spondingposition on theleft sideofthedoor assem-
bly.
4.2
Useacrossheadscrewdriver to removethelower
hinge.
5
6
6.1
Installthedoor assemblyonto theshaftonthe
compartment assembly.
7
7.1
Takeout theadditional hinge andhinge cover from
thefreezer drawer,andputthedismantledhinge and
hingecoverinto abag,andstorethemaway.
7.2
Insert thehingeinto thehole ontheleft sideofthe
doorassembly, then usethescrews tofasten the
hinge, and earththembyplacingwashers under-
neaththescrews.
7.3
Connect theterminalson thecabinet to theterminals
on thedoor assembly, thenfastenthehingecoveron.

)
(fig.1&2) (fig.3)