Haier HLP21N User manual

Top-Load Portable Compact Clothes Washer
Laveuse compacte à chargement par le haut
Lavadora compacta de carga superior
User Manual
Guide de l’utilisateur
Manual del usuario
HLP21N
Designed for
High-Eciency;
use HE detergent.
Conçue pour
haute ecacité;
utiliser un
détergent HE.
Diseñada para un
alta eciencia; use
detergente HE
(Alta eciencia).

1
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS.................................................................2
Installation Safety Precautions.....................................................................................2
General Safety Precautions ..........................................................................................3
PARTS AND FEATURES .......................................................................................4
INSTALLATION INSTRUCTIONS..........................................................................5
Tools Needed ................................................................................................................. 5
Parts Supplied................................................................................................................5
Location Requirements.................................................................................................6
Drain System Requirements .........................................................................................7
Electrical Requirements ................................................................................................8
STEP BY STEP INSTRUCTIONS............................................................................9
Step 1 - Unpack the Washer..........................................................................................9
Step 2 - Route Drain Hose (Optional) .........................................................................10
Step 3 - Install Bottom Plate .......................................................................................10
Step 4 - Install Casters (optional) ...............................................................................11
Step 5 - Level the Washer ...........................................................................................12
Step 6 - Secure the Drain Hose...................................................................................13
Step 7 - Connect the Water Hose...............................................................................13
Step 8 - Complete Installation ....................................................................................16
CONTROL PANEL AND FEATURES .................................................................... 17
OPERATING INSTRUCTIONS............................................................................. 19
Step 1 - Prepare and Sort Laundry..............................................................................19
Step 2 - Add Fabric Care Products..............................................................................19
Step 3 - Load the Washer ............................................................................................20
Step 4 - Start the Washer............................................................................................20
CARE AND CLEANING GUIDE............................................................................ 21
Cleaning and Maintenance..........................................................................................21
Vacationing Precautions .............................................................................................21
Moving or Storage Preparation...................................................................................21
TROUBLESHOOTING........................................................................................ 22
LIMITED WARRANTY ........................................................................................ 24
RECORD KEEPING
Thank you for purchasing this Haier
product. This user manual will help you
get the best performance from your
new washer.
For future reference, record the model
and serial number located on back of
the washer, and the date of purchase.
Staple your proof of purchase to this
manual to aid in obtaining warranty
service if needed.
___________________________________
Model number
___________________________________
Serial number
___________________________________
Date of purchase

2
IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using
your appliance, follow the basic precautions, including the following:
•Read all of the instructions before using this appliance.
•Use this appliance only for its intended purpose as described in this user
manual.
•Do not use the washer for commercial clothes washing.
• Thiswasherhasonlyonewaterinlethoseforllingthewashbasketwith
cold water.
INSTALLATION SAFETY PRECAUTIONS
DANGER
Suffocation Hazard
Before you throw away your old appliance, remove the door or lid so
that children cannot hide or get trapped inside your old appliance.
•This appliance must be properly installed and located in accordance with
the installation instructions before it is used.
•Do not store or install this appliance where it will be exposed to
temperatures below freezing or exposed to weather, which can cause
damage to the appliance.
•The appliance must be properly grounded to conform with all electrical
codes and ordinances. See “Electrical Requirements” section.

3
GENERAL SAFETY PRECAUTIONS
•Keep the area around your appliance free from combustible materials
such as lint, paper, rags or chemicals.
•Close supervision is necessary if this appliance is used by or near
children. Do not allow children to play on, with, or inside this appliance.
•Do not place articles that have been previously cleaned in, washed in,
soaked in, or spotted with gasoline, dry-cleaning solvents or other
ammableorexplosivesubstancesinthewashwater.Thesesubstances
giveovaporsthatcouldigniteorexplode.
• Donotaddgasoline,dry-cleaningsolvents,orotherammableor
explosivesubstancestothewashwater.Thesesubstancesgiveo
vapors that could ignite or explode.
•Do not reach into the appliance if the wash basket, tub or agitator is
moving.
•Do not tamper with the controls.
•Never unplug your washer by pulling on the power cord. Always grasp
theplugrmlyandpullstraightoutfromtheoutlet.
•To minimize the possibility of electric shock, unplug this appliance from
the power supply before attempting any maintenance or cleaning.
NOTE: Turningthecycleselectorknobtothe“O”positiondoesNOT
disconnect the appliance from the power supply.
•Do not attempt to service, repair or replace any part of the appliance
unlessspecicallyrecommendedinthisusermanualorinpublished
repair instructions that you understand and have the skills to carry out.
•Before discarding or removing from service, remove the washer door or
lid.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY

4
PARTS AND FEATURES
E
F
K L
M
H
G
I
J
A
B
C
D
Top Lid
Control Panel
Cabinet
Cabinet Handle
Leveling Feet
Drain Port
Power Cord (120 Volt/ 60 Hz)
Access Panel
Water Inlet Valve
Wash Basket
Power Jet
Outer Tub Cover
Balance Ring

5
INSTALLATION INSTRUCTIONS
TOOLS NEEDED
•Pliers
•Wrench
•Phillips Screwdriver
•Measuring Tape
•Carpenter’s Level
PARTS SUPPLIED
FRONT
FACE TO FLOOR
•Drain Hose Hook •Water Hose
(atwashers
pre-installed)
•Bottom Panel
•Bottom Panel
Screw (6) •Caster (4) •Caster Wrench
•Quick Sink Faucet
Adapter •Cable Tie
•User Manual

6
LOCATION REQUIREMENTS
• Thewashermustbeinstalledonasolidoortominimizevibrationduringthe
spincycle.Aconcreteoorisbest.
• Theoorshouldbelevelwithmaximumslopeof1"(25mm)underentirewasher.
•A suitable location is protected from direct sunlight and heat sources such as
radiators, baseboard heaters, or cooking appliances.
•Do not install on carpeting.
•The location must have a grounded electrical outlet located within 4 ft. (1.2 m) of
power cord on the back of the washer.
•Water faucet must be present within 3 ft. (0.9 m) of the connection on the
washer.
•Only connect to cold water tap (faucet).
•The water pressure should be between 20 and 100 psi (138 and 690 kPa).
WARNING
Do not install or operate the washer where it will be exposed to
temperatures below 32°F (0°C). Water remaining in the washer will
freeze and cause damage to the washer.
WASHER DIMENSIONS
17¹⁹⁄₃₂"
(44.7 cm)
17¼"
(43.8 cm)
29²⁹⁄₃₂"
(76.0 cm)

7
DRAIN SYSTEM REQUIREMENTS
WALL OR FLOOR STANDPIPE
The height of the standpipe must be between 31½” (80 cm) and 47¼”(120 cm)
fromthebottomofthewasher.Theminimumdiameterofthestandpipemustbe2"
(5cm).
Wall Floor
31½"– 47¼"
(80 cm – 120 cm)
LAUNDRY TUB
The laundry tub must have a minimum
capacity of 20 gal. (76 L). The height of the
laundry tub must be at least 31½” (80 cm)
and no more than 47¼”(120 cm).
31½"– 47¼"
(80 cm – 120 cm)

8
ELECTRICAL REQUIREMENTS
WARNING
The washer must be connected to a properly grounded 120 volt, 60 Hz.,
AC only, 15- or 20-amp, fused electrical supply. A time-delay fuse or
circuit breaker is recommended.
•If the electric supply provided does not meet the above requirements, contact a
licensed electrician.
WARNING
Improper connection of the equipment-grounding conductor can result
in a risk of electric shock. Check with a qualified electrician or
serviceman if you are in doubt as to whether the appliance is properly
grounded.
•This appliance must be grounded. In the event of malfunction or breakdown,
grounding will reduce the risk of electric shock by providing a path of least
resistance for electric current.
•This appliance is equipped with a cord having an equipment-grounding
conductor and a grounding plug. The plug must be plugged into an appropriate
outlet that is properly installed and grounded in accordance with all local codes
and ordinances.
•Do not use a 3 prong plug adapter.
•Do not use an extension cord.

9
STEP BY STEP INSTRUCTIONS
INSTALLING YOUR WASHER
Werecommendthatyournewwasherbeinstalledbyaqualiedappliance
technician. If you feel that you have the skills to install the washer, please read the
installation instructions carefully before installing.
CAUTION: If, after completing these steps, you are unsure that the washer is
properlyinstalled,contactaqualiedappliancetechnician.
WARNING
If your washer was just delivered and the outside temperature was
below freezing, do not operate until the washer warms up to room
temperature.
STEP 1 - UNPACK THE WASHER
1. Remove all packing materials. This includes the foam base and all adhesive tape
holding the washer accessories inside and outside.
NOTE: The bottom panel is located between the top foam used for protection
and the box.
2. Open the top lid to remove the wash basket brace. Pull to remove.
NOTE: Save the wash basket brace to use when moving the washer in the future.

10
3. Inspect and remove any remains of packing, tape or printed materials before
using the washer.
WARNING
Suffocation Hazard
To avoid danger of suffocation, keep plastic bag and other packing
material away from babies and children. Do not use this bag in cribs,
carriages and playpens. The plastic bag could block nose and mouth
and prevent breathing. This bag is not a toy.
4. Placeapieceofcardboardorotherprotectivematerialontheoor.Laythe
washer on its back on top of the cardboard or protective material.
STEP 2 - ROUTE DRAIN HOSE (OPTIONAL)
The washer comes from the factory with the drain hose routed so that it extends
from the bottom, left-hand side of the washer. If you want the hose to extend from
the right-hand side of the washer for draining, you must reroute the hose.
1. Remove the hose clamp. Gently pull the drain hose back through the opening on
the left-hand side of the washer.
2. Insert the drain hose into the opening on the right-hand side of the washer and
gently extend the hose to its full length.
Front Front
STEP 3 - INSTALL BOTTOM PLATE
1. Place the bottom plate against the bottom of the washer, with the side marked
“facetooor”facingyou,andtheendmarked“front”alignedwiththefrontof
the washer.
2. Align the holes in the bottom plate with the holes in the bottom of the washer.
IMPORTANT: To avoid damage to the washer, make sure the bottom plate is
positioned correctly before fastening the plate to the washer.

11
3. Using a Phillips screwdriver and the 6 bottom plate screws (provided), insert
each screw through the bottom plate and into the bottom of the washer.
Tighten the screws completely.
FRONT
FACE TO FLOOR
Bottom Panel Screw
STEP 4 - INSTALL CASTERS (OPTIONAL)
1. Unscrewandremovethe4xedlevelinglegs.
2. Screw each of the 4 casters into the holes in the base of the washer. Using a
wrench, tighten the locking nut to the bottom of the washer.
Caster Wrench
Caster
3. Push the tab on each caster into the down position to lock the caster.

12
STEP 5 - LEVEL THE WASHER
IMPORTANT: Proper leveling of the washer will help reduce noise and vibration.
1. Stand the washer upright.
NOTE: If you installed casters, unlock them by lifting up on the tab.
2. Placewasherinitsnallocation.Checkthatthewateranddrainlinesarenot
strainedorpinched.Makesurethatallfourfeetarermlyincontactwiththe
oorandthatthewasherrestssolidlyinposition.
3. Using a carpenter’s level, check to make sure the washer is level from side to
side and from front to back.
4. If the washer is not level, adjust the leveling feet or casters. Turn clockwise to
extend (raise the washer) or counterclockwise to retract (lower the washer).
NOTE: If the washer is inclined more than 2°, it will not operate.
FIXED LEVELING FEET
1. Loosen the adjustable large, outer ring, and then turn the center foot clockwise
or counterclockwise to adjust the height.
Raise Lower
Outer Ring
Center Foot
2. Once the washer is level, lock the position of each leveling foot by tightening the
large, outer ring.

13
CASTERS
Using the caster wrench turn the locking nut on the caster clockwise or
counterclockwise to adjust the height.
Raise Lower
Locking Nut
STEP 6 - SECURE THE DRAIN HOSE
1. Put the drain hose hook end in a drain pipe or laundry tub.
2. Secure the drain hose in place by fastening it to a water hose, the standpipe, or a
leg on the laundry tub. See “Drain System Requirements” for details.
STEP 7 - CONNECT THE WATER HOSE
IMPORTANT: Only use a new hose when installing the washer.
NOTE: Periodically inspect hose for cracks, cuts, leaks or wear. Replace with new
hose every 5 years.
1. Checkthataatwasherispresentandrmlyinplaceineachendofthewater
inlet hose. Flat washers are pre-installed at the factory.
A
Washer

14
2. Thread the white end of the inlet hose by hand onto the inlet valve on the back of
the washer until snug. Then using pliers, tighten an additional two-thirds turn.
IMPORTANT: To avoid damage to the hose coupling, do not overtighten.
NOTE: To avoid damage to the washer inlet valve, do not use plumber’s tape or
sealants on the valve threads.
OPTION 1 - FIXED
NOTE: In order for this washer to meet the regulated energy standards, the faucet
supplying the water must be set to cold.
1. Thread the grey end of the inlet hose onto the water faucet by hand until snug.
Then using pliers, tighten an additional two-thirds turn.
IMPORTANT: To avoid damage to the hose coupling, do not overtighten.
NOTE: To avoid damage to the faucet do not use plumber’s tape or sealants on
the valve threads.
Cold
2. Turn on the water faucet and check for leaks. If there is any leaking, check for
loose connections and tighten.

15
OPTION 2 - PORTABLE
NOTE: In order for this washer to meet the regulated energy standards, the faucet
supplying the water must be set to cold.
1. Remove the aerator from your faucet nozzle.
2. Examine the faucet to determine if it has internal or external faucet threads.
•Internal threads - Keep the rubber washer in place
•External threads - Remove the rubber washer before threading the
faucet connector onto the faucet.
Removable Washer
Secondary Washer (Do not remove)
Washer Support (Do not remove)
Silver Faucet Connector
NOTE:Thefaucetconnector(provided)isthreadedsothatitwilltMOST
faucets.Iftheprovidedfaucetconnectordoesnottyourfaucet,youwillneed
to purchase a faucet connector in the correct size.
3. Thread the silver faucet connector onto the faucet.
Internal Threads External Threads
Rubber Washer
Silver Faucet Connector
Quick-sink Faucet Adaptor
Water Inlet Hose
4. Attach the quick-sink faucet adaptor to the grey end of the inlet hose making
surethepre-installedatwasherisbetweenthehoseandtheadaptor.
5. Attach the quick-sink faucet adaptor to the silver faucet connector by pulling
down on the white collar while pushing upwards on the faucet. Release the white
collar and it will lock into place.
6. Turn on the water faucet and check for leaks. If there is any leaking, check for
loose connections and tighten.

16
7. Using 2 cable ties, fasten the water inlet hose to the drain hose so that the hoses
will stay in place.
Water Inlet
Hose
Cable Ties
Drain Hose
IMPORTANT: Place the extra hose length (slack) inside the sink to avoid strain
and possible damage to the water faucet.
Water Inlet
Hose
STEP 8 - COMPLETE INSTALLATION
1. Plug the washer into a grounded 3 prong outlet.
2. Check that water faucet is turned on.
3. Dispose of/recycle all packaging materials.
4. Run a normal wash cycle using detergent to test and
clean the washer. See the ”Operating Instructions”
section.

17
CONTROL PANEL AND FEATURES
CONTROL PANEL
HIGH
MEDIUM
LOW
HEAVY
QUICK WASH
NORMAL
WASH
RINSE
SPIN
STATUS
WATER
LEVEL
CYCLE
START
PAUSE
POWER
ON/OFF
WASH CYCLE BUTTON
•Use this button to select the desired cycle for your wash load.
•The standard default settings of each cycle will be displayed; the default
settings can be changed by using the Setting button - Water Level.
•There are 3 cycles to choose from:
Heavy - Use this cycle for heavily soiled durable garments. This cycle can
also be used for towels, sports gear, children’s clothes, etc.
Normal - Use this cycle for normally soiled cottons and mixed fabric loads.
Quick Wash - Use this cycle to wash small, lightly soiled loads that are
needed in a hurry.
SETTING BUTTON
Water Level Button
•Use this button to select an appropriate water level for your load. Small is
the lowest water level and Super is the highest.
CYCLE PROGRESS INDICATORS
•When the washer is st powered on, the Cycle Progress lights indicate the
stages of the selected cycle.
•As a stage is completed, the light will turn indicating that the next stage is
operating.
•The entire wash cycle is complete when all of the lights turn

18
START/PAUSE BUTTON
•Press this button to start a selected cycle or to pause an operating cycle.
NOTE: After starting the wash cycle, you must pause the operating cycle to
change the Water Level setting.
POWER BUTTON
•Press the POWER button to turn on the washer.
NOTE: If the washer is turned on, but START/PAUSE is not pressed, the power
will automatically turn after 5 minutes.
CYCLE GUIDE
NOTE: To protect your wash load, all options and settings are not available for all
cycles. The shaded boxes indicate the default settings for each cycle.
*Heavy Duty cycle has a default water level of “High” and can not be changed.
CYCLE
PRESS WASH
CYCLE
BUTTON
FABRIC TYPE WASH
PROCESS
EST
TIME
WATER
LEVEL
Normal 0
Cottons,
linens and
mixed
garments
13-16 Wash
Rinse
Spin
:35
Medium
High
Low
Heavy Duty* 1
Heavily soiled,
durable
colorfast
fabrics
26-27 Wash
Rinse
Spin
:68
High
Quick Wash 2
Cottons,
linens and
mixed
garments
5-6 Wash
Rinse
Spin
:21
Medium
High
Low
Wash Only 3 All Wash
Medium
High
Low
Wash & Rinse 4 All Wash
Rinse
Medium
High
Low
Rinse & Spin 5Unsoiled
garments
Rinse
Spin :29
Medium
High
Low
Spin Only 6Clean soaking
wet garments Spin :06 n/a
•
Estimated Time is based on an average wash load size. Actual time will vary based on the
amount of clothes being washed and other variables such as supply line water pressure.
Medium
Low
:14
:22