Hamee SP02 User manual
SP02 Stereo Bluetooth Speaker User Manual
Operating Instructions
Power On
When the speaker is off, press and hold the Multi-function Button(MFB) for 3 seconds,The
LED indicator will flash slowly in blue.At this time you will hear “power on” from the
speaker . The speaker will be paired with the last connected bluetooth device or mobile
phone automatically when turned on.
Power Off
When the speaker is on, press and hold the MFB for 4 seconds,you will hear a tone. The
LED indicator will flash slowly in red. At this time,you will hear “ power off “ from the
speaker . The speaker will disconnect from your phone devices when turned off.
Pairing Mode
When the speaker is OFF,(And confirm the line in port without 3.5mm audio cable) press
and hold MFB for 6 seconds until the LED indicator flashes red and blue in alternating
colors,and you will hear “ pairing” from the speaker.When the speaker connect with your
device,you will hear”pairing completed,connected”.
Notes: If you release the MFB before the speaker goes into pairing mode,the speaker
will enter the power ON state. Needs to be OFF again to operate the speaker. or press the
vol+and vol-button concurrently to go into pairing mode again.
3mins pairing time,if not connect with any device,it will quit pairing mode and you will hear
“pairing not completed” from speaker.
Easy connection function
If the speakert doesn’t connect with any phones when it is on, you can enter into speed
pairing mode by pressing the vol+ and vol- button concurrently and connect with your
phone.
FCC ID:2AD2XSP02
Answering Calls
If a call comes in when listening to music or speaker is standing by, you will hear
“incoming call “ from the speaker.press the MFB to answer the incoming call. If the music
is playing, it will pause automatically during the call. After finishing your call, the music will
start playing automatically.
Reject Calls
If a call comes in when listening to music or speaker is standing by, press and hold the
MFB for 2 seconds to reject the incoming call. After the call has been rejected, your music
will start playing automatically.
End Calls
To end a call, press the MFB.
Volume
To adjust the volume when talking on the phone, press the V+ or V- to adjust the volume
up or down. When you reach the max/min volume, you will hear a warning tone.
Last Number Redial
When listening to music or speaker is standing by, double click the MFB to redial the last
number. If you are listening to music, it will pause automatically during the call.
Mute
When talking on the phone, press and hold Vol+ or Vol- for 2 seconds to mute your
microphone. You will hear the caller, but the caller will not to hear you.
Note: There will be a warning tone every 3 seconds, reminding you that you are in mute
mode.
Quit Mute
Hold Vol+ or Vol- for 2 seconds to exit mute mode.
Switching Between Your Mobile Phone and Headset
When talking on the phone, double-click the MFB to switch the voice from your speaker to
your mobile phone. By double clicking the MFB again, the voice will switch back to the
speaker.
Reconnect
When the speaker and mobile phone are disconnected, press MFB, you will hear
“connected” ,it will reconnect.
Note: Some devices may have a prompt screen, that will ask you if you would like to pair
your device.
Voice-Command Dial
If your mobile phone supports this function, press and hold backward button/ forward
button for 2 seconds to activate voice command. If the speakert is playing music, the
music will be paused automatically during this time. By double click MFB during the voice
dial mode, voice dial will be canceled.
Note: Please refer to the manual of your mobile phone for voice-command dial support.
Connect with 2 mobile phones
A. First disconnect the Bluetooth device from your phone if it is already connected.
B. Press vol+ and vol- concurrently to put the headset in pairing mode.
C. Turn on and search Bluetooth device on your second phone until you find ZB-VAULT”
and select to begin pairing.
D. Please reconnect with your first mobile phone device.
E. Now you should have two mobile phones connected with the speaker.
Transfer Calls
When you are talking on the phone and receive another incoming call, press the MFB for
2 seconds, you will answer the incoming call. Your first call will be placed on hold. When
press the MFB for 2 seconds again, you will transfer back to your first call. You should
hear a beep. During this time your second call will be placed on hold. You can also end the
call by clicking the MFB.
Pause and Restart Music
When listening to music, click MFB to pause music and click MFB again to restart music.
Play Previous Song
Press backward button.
Play Next Song
Press forward button.
Specifications
V3.0+EDR Bluetooth Technology
Profile supports: HSF, HFP,A2DP,AVRCP
Transmission Distance: 10 meters/33 feet
Transmission range: 2.40GHz~2.48GHz
Size: 137x10.3x38 mm
Net Weight: 176 grams
Music Time: 5 hours
Talk Time: 6 hours
Standby Time: 100 hours
Operating Temperature: -20-60 °C
Device ID: ZB-VAULT
Pin Code: 0000
Charging Red LED Light
Charging Complete Red LED light turn off
Stand by Blue LED light flashes twice every 5 seconds
Power On (Talking) Blue LED light flashes twice every 3 seconds
Power On (Incoming Call) Blue LED light flashes continuously
Power On (Not Connected) Blue LED light flashes once every 5 seconds
Battery Low Red LED light flashes once every 5 seconds
Pairing Mode LED light flashes in red and blue alternately
NOTE:This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Thisdevicecomplieswithpart15oftheFCCrules.Operationissubjecttothefollowingtwo
conditions:
(1)thisdevicemaynotcauseharmfulinterference,and
(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycause
undesiredoperation.
Changesormodificationstothisunitnotexpresslyapprovedbythepartyresponsiblefor
compliancecouldvoidtheuser'sauthoritytooperatetheequipment.
