Happy Nuts THE BALLBER PRO User manual

USER GUIDE

JUST THE TIPS USING YOUR GUARDS
Step 1 ☞
1MM GUARD:
FOR NUT + BODY GROOMING
MULTI-ADJUSTABLE GUARD:
FOR FACIAL HAIR GROOMING
Choose your guard, if desired. Attach the guard by placing it over the trimmer blade.
To remove the guard, unlatch one side of the guard and
remove from the blade.
Step 2 ☞
Press power button to turn on trimmer.
Step 3 ☞
Slide trimmer blade across skin to
remove hair, repeat as necessary.
Step 4 ☞
Rinse the blade under running water
and wipe with a soft cloth. Store in
a dry place.
Visit www.myhappynuts.com/register
Register Ballber™ Pro & join The Nut Club to
receive a free, extended warranty.
To attach the multi-adjustable guard, place the
front of the guard onto the blade and push the
back of the guard into the hole on the backside
of the trimmer. You will hear a click once
properly connected.
“C L ICK”
2
1
Turn the adjustable dial to the desired setting
between 0-10mm.
Begin trimming your facial hair by moving the
blade in long strokes against the direction of
hair growth.
To remove the guard, lift the backend of the
guard o the trimmer, and carefully slide the
guard o the blade.
2
1

CHARGING REPLACING THE
BLADES
Visit www.myhappynuts.com to explore products
for men’s nuts.
Use code BALLBERPRO10 for 10% o your next
order | Limit one use per customer.
WIRELESS CHARGING WITH THE DOCK
QUICK CHARGING WITH THE POWER CORD
Insert the USB-C charging cord into the
back of the dock and place the dock on a
level surface. Insert charging cord into AC
wall outlet. Make sure trimmer is turned o
and place into the dock.
When fully charged, the indicator light
on the digital display changes from red to
green.
The digital display indicates the percentage
of remaining battery. The Ballber™ Pro
takes up to 4 hours to fully charge and lasts
up to 120 minutes on a full charge.
Make sure the trimmer is o and insert the
charging cord into the bottom port of the
trimmer then insert into wall AC Outlet.
When fully charged, the indicator light
on the digital display changes from red to
green.
The digital display indicates the percentage
of remaining battery. The Ballber™ Pro
takes up to 4 hours to fully charge and lasts
up to 120 minutes on a full charge.
DISCLAIMER:Do not overcharge. Overcharging can shorten the
life of the battery over time. Only use the power cord provided.
Step 1 ☞
Make sure trimmer is o. Push the blade release
button on the back of the trimmer while pulling
the blade o the trimmer.
Step 2 ☞
Insert replacement blade into the trimmer body.
Make sure the two prongs are lined up with the
two slots. You will hear a click when the blade
properly inserted.
CAUTION:Ensure trimmer is turned o and not charging before
replacing the blade. Do not use the trimmer if the blade is damaged.
Throw the broken blade away immediately. For optimal performance,
blades should be replaced every 6 months or when the trimmer no
longer provides the results you expect. Visit www.myhappynuts.com
to purchase The Ballber™ Pro replacement blades.

CLEANING
TRAVEL LOCK
IMPORTANT
SAFETY INSTRUCTIONS
Step 1 ☞
Use the cleaning brush to remove hair
from the blade.
Step 2 ☞
Rinse the blade under running water
and wipe with a soft cloth.
Step 3 ☞
Store in a dry place.
CAUTION:Always ensure trimmer is turned o and unplugged
before cleaning. Clean after each use.
For assistance, email us at [email protected] for additional support.
The Ballber™ Pro is designed in California and assembled in China.
Distributed by Suit Up Brands LLC, Playa Del Rey, CA 90293.
© 2022 Suit Up Brands LLC. All rights reserved. Happy Nuts and The Ballber are
trademarks of Suit Up Brands LLC, registered in the U.S.
Travel lock prevents the trimmer from
accidentally powering on.
For household use only. When using an electric product, always follow basic safety precautions.
Read all instructions before using The Ballber™ Pro. Save these instructions for future reference.
Warning
To reduce the risk of burns, re, electric shock, or injury to persons
• Use this product only for its intended household use as described in this manual.
• This trimmer is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the trimmer by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the trimmer.
• The trimmer is intended to cut hair, and is capable of cutting skin if not used carefully. Do not use
attachments not specied by the manufacturer.
• This trimmer is for personal use only. Do not use it on animals.
• Always attach the power cord to the trimmer rst, then to power outlet.
• Never use the trimmer if it has a damaged power cord or damaged power adapter, if it is not
working properly, if it has been damaged, or after the charging cord has been dropped into
water. Contact customer service at [e-mail] to determine if the product is under
warranty.
• Keep the appliance away from direct sunlight and heated surfaces. Do not store at temperatures
above 140°F (60°C). Do not place anything heavy on or pinch the appliance.
• To prevent possible damage to the power cord, do not wrap it around the product.
• Keep the air openings free of lint, hair and similar objects.
• Never drop or insert any object into any opening.
• Do not operate or plug in trimmer where aerosol (spray) products are being used or where
oxygen is being administered.
• Always check the blade and trimming guard before using the trimmer. Do not use the trimmer if
the blade or guard are damaged, as injury may occur.
• Always store the trimmer, attachments and power cord in a moisture-free area. Make sure the
cord is disconnected from the trimmer.
• To recharge the battery, only use the supply unit provided with the trimmer.
DANGER
To reduce the risk of electric shock
• If connected to a power outlet, do not reach for the appliance that has fallen into water. Unplug
immediately before retrieving appliance.
• Do not place or store the appliance where it can fall or be pulled into a tub or sink. Do not place
or drop into water or other liquid.
• Do not use while fully submerged in water.
• Always unplug the appliance from the electrical outlet immediately after charging. Unplug this
appliance before cleaning.
BATTERY
This appliance contains batteries that are non-replaceable & materials that are hazardous
to the environment. Battery must be be disposed of separately from household waste.
• Unplug and operate the trimmer until the battery runs out.
• Remove the screw at the base of the backside of the trimmer.
• Remove the battery and PCB (Protection Circuit Board) for disposal.
• Dispose of the battery safely according to your local environmental laws and guidelines.
To activate travel lock, press and hold the on/
o button for three seconds. The red travel lock
symbol appears on the digital display when
activated.
To deactivate the travel lock, press and hold the on/
o button for three seconds. The green travel lock
symbol appears on the digital display when travel
lock is deactivated.

)&&:$51,1*
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and
operated with minimum 20cm distance between the radiator and your body: Use only the supplied
antenna.

WE’RE
MAKING YOUR
NUTS OUR
BUSINESS.
SCAN TO ACTIVATE AN EXTENDED WARRANTY
AND GET 10% OFF YOUR NEXT ORDER.