Harison R470M-2 User manual

9.
How To Use:
Mode 1 [ Manual Mode ]
Package Contents
(K1)
Adjustable Roller
Lock knob (K1)
Pointer Lock
Knob (K2)
Pointer
Adjustable
Roller (R1)
Motorised Roller (M1)
Central Spindle (SP1)
4
5
910
1
1. Top Base Plate (White Diffuser) (W1) 1 Pc.
2. Top Base Plate (Transparent) T1 1 Pc.
3. Bottom Base Plate (Transparent) T2 1 Pc.
4. Pillars (P1) 4 Pc.
5. Tightening Knobs (K3) 4 Pc.
6. Motor Controller 1 Pc.
7. Power Adapter 1 Pc.
8. Cross Base 1 Pc.
9. Carry Bag 1 Pc.
10. Instruction Manual 1 Pc.
Turn the knob (K1) anti-
clockwise to loosen it.
(Note: only 1-2 turns of
the knob are sufficient
to loosen it)
1.
Central
Hole (H1)
(K2)
Tighten the knob K2 by turning it
clock-wise. A dimple in the pointer
base will match with an alignment
slot so as to position the pointer
correctly.
5.
}
Note: R1 Should be at a higher level to M1
(K1)
(R1)
M1
Lock by turning knob
(K1) clock-wise.
2b.
2a.
Place the Base plate (T2)
by aligning its central hole
(H1) with the central spindle
(SP1) Press down gently so
that the (SP1) fits snugly
into hole (H1)
6.
Loosen the pointer
tightening knob (K2) by
turning it anti-clockwise
3.
3
2
6
Base Plate
(T2)
Once loose move the pointer to
the position as shown:
4.
Place the Base Plate (T1) on
the Pillars by aligning with the
Base Plate (T2).
8.
Put each Pillar (P1) on the
side hole of the Base Plate
(T2) and tight with tighten
knob (K3).
7.
Place the Top Base Plate
(White Diffused) (W1) on the
transparent Base Plate (T1).
Make sure all Plates are
aligned simultaneously.
7
8
Specification:
Diameter:
460 mm
Max Speed:
3.5 rpm
Min Speed:
0.3 rpm
7.5 Kg
Max Load:
W1 T1 T2
Page 1 of 2
RInstruction Sheet
Rotary Turn-Table R470M-2
Raise the knob
( and the roller R1)
upwards.

12.
Rotate the rotary plate by hand
so the number ‘1’ aligns with the
pointer as shown:
11.
The Rotary Turn - Table is now
ready to be used in the manual
mode.
Mode 1 [ Manual Mode to continue... ]
5. Position your video camera on a tripod
and shoot the video.
Control the rotation of the base plate as follow:
1st press of B2 Rotary Turn - Table move clock-wise
2nd press of B2 Rotary Turn - Table move anti-clockwise
4.
3.
Place the object to be photographed in the
center of the rotary plate.
K3
B2
L1
Press B2 for 2 sec Rotary Turn - Table will stop
The speed controller knob (K3)
can be used to vary the speed of
rotation.
Then move the rotary
plate gently with your
h and t o t he n e xt
division.
Click another picture.
By repeatedly moving
the base plate by each
division you can thus
click 144 pictures in
high resolution.
Each picture will be of
the object rotated by 2.5
degrees.
Move the base plate with
your hand so that the pointer
aligns with ‘01’.
( )
A
P l a c e t h e o b j e c t t o b e
photographed in the centre of the
rotary plate.Position your camera
on a tripod and click a picture.
( )
B(C)
Run the image in a sequence by using a suitable software application to obtain a high resolution 360 degree product video !
Mode 2 [ Video Mode ]
Connect the power adopter (P1) to the motor controller (C1).
Connect the motor controller to the socket in the base (B1).
The socket has ‘MOTOR’ printed next to it.Upon switching ON
the AC supply, the indicator (L1) will glow.
2.
C1
L1
K3
B1
P1
1a.
1b.
Turn the knob K1 anti clock-
wise (2-3 turns) to loosen it.
Lower the knob K1 ( and the
roller R1) .
(K1)
(R1)
1c. Lock R1 in place by turning
knob (K1) clock-wise.
R1
K1
M1
}
Note: Ensure that R1 is
at lower level than M1.
Now keep HARISON Argos
SL-204 LED Light on the
Base Plate (T2) for
shadow-less photography
or videography.
10.
HARI SINGH & SONS (An ISO 9001 : 2000 Company) G.T. Road, Near Canal, P.O. Sultanwind, Amritsar - 143021, INDIA.
Phone: [phone] E-mail: [email protected] URL: harisonphoto.com
Page 1 of 2
RInstruction Sheet
Rotary Turn-Table R470M-2