Harlock-RC VIPER 140 User manual

VIPER 140 Manual
Release 1.0 –January 2018
Please read this user manual carefully, it contains instructions for the correct assembly of the model.
Please refer to the web site www.harlock-rc.com for updates and other important information.
Thank you for your purchase, we hope you enjoy your new Airplane.
For sales and info inquiries please e-mail [e-mail]
Specifications:
Wing span: 1400mm
Length: 1250mm
Radio: Minimum 8 channel | 8 micro servos
EDF: 90mm | 5000-5500mah 6s
Weight: 4,200Kg (with battery)
Inside the box:
Complete structure
Linkages
Screws and bolts
Thrust tube (electric version)
Carbon round tubes for wings and stabs
Hinges, Horns and servo holders already mounted
Additional required:
8 micro servo
EDF 90mm
Landing gear
LiPo battery pack 5000-5500mah 6s
NOTES FOR ASSEMBLY
Please refer to this manual for assembly instructions for this model.
Each step is based on the work done in the previous step. Changing the order of assembly may result in
additional or unnecessary steps.
1

Assembly the servo with the 2 servo screws (included with servo)
Aileron servo on the wings
Bag 1:
8x Self tapping metal screws 2,5x6mm
2x Threaded metal linkage M2 length 22mm
4x Plastic ball M2
4x M2 metal bolts
4x M2x10mm head cap screws
2x Servo holder
START ASSEMBLY
2

Approx 45mm
Self-tapping metal screws 2,5x6mm
3

Do the same for both wings.
Plastic ball links M2
M2x10mm metal screws and M2 metal bolts
linkage M2 length 22mm
Flap servo on the wings
Approx 45mm
Bag 2:
2x Threaded metal linkage M2 length 22mm
4x Plastic ball M2
4x M2 metal bolts
4x M2x10mm head cap screws
Suggested uniball distance
4

Do the same for both wings.
Fix the servo with 2 servo screws (included with servo)
Fix servo horn (included with servo),
M2x10mm metal screw and M2 metal bolt
Plastic ball links M2
M2x10mm metal screw and M2 metal bolt
linkage M2 length 22mm
Suggested uniball distance
5

Self-tapping metal screws M3x12mm
Lending gears on the wings (sold separately)
Nose landing gear (sold separately)
Do the same for both wings.
Bag 3
8x Self tapping metal screws
3x12mm
Before insert the screw proceed to hole with 1,5 drill bit. See following
pictures to find the correct landing gear position.
Bag 4:
4x Self tapping metal screws 3x12mm
6

Self-tapping metal screws M3x12mm
Fix the servo with 2 servo screws (included with servo)
Plastic ball links M2 + linkage
(included with landing gears)
Before insert the screws proceed to hole with 1,5 drill bit. See following
pictures to find the correct landing gear position.
7

Fix the servo with 2 servo screws (included with servo)
M2x10mm metal screw and M2 metal bolt
Plastic ball links M2
linkage M2 length 22mm
Rudder servo
Bag 5:
1x Threaded metal linkage M2 length 40mm
2x Plastic ball M2
2x M2 metal bolts
4x Self tapping metal screws 2,5x6mm
2x M2x10mm head cap screws
1x servo holder
8

M2x10mm metal screw and M2 metal bolt
Self-tapping metal screws 2,5x6mm
linkage M2 length 22mm
Elevator servo
Bag 6:
2x Threaded metal linkage M2 length 22mm
4x Plastic ball M2
4x M2 metal bolts
4x M2x10mm head cap screws
Suggested uniball distance
9

Plastic ball links M2
linkage M2 length 22mm
Do the same for both elevators.
M2x10mm metal screw and M2 metal bolt
Fix servo horn (included with servo), assembly in according with the central horn position
Fix the servo with 2 servo screws (included with servo)
Pass the servo wire as shown:
Suggested uniball distance
10

Carbon round tube Ø10x1x250mm
Nylon M6 bolt
Nylon Ø6 washer
Not included
Elevators on fuselage
Bag 7:
2x Nylon nut M6
2x FG washers Ø6 x 12mm
11

Do the same for both elevators.
Glue one side Velcro on the ESC support and other side on ESC
ESC
12

Put the ESC on the proper support
Ensure the ESC with plastic band
13

Approx 5mm
Enlarge the hole until thrust tube comes out of Approx 5mm
Thrust tube and fan
Bag 8:
6x Self tapping metal screws 3x12mm
14

Approx 15mm
Fix the thrust tube
with adhesive tape
Self tapping metal screw 3x12
Fan cover
Bag 9:
4x Nylon bolt M4
15

Nylon M4 bolts
16

Do the same for both wings.
Carbon round tube Ø16x1x500mm
M4X15mm Head cap screw
Wings
Bag 10:
2x M4x15mm Head cap screws
17

To save weight the landing gear control unit can be powered directly by your receiving.
Indicative battery position
Connect receiving, landing gear control unit and apply battery Velcro
18

19

max surface travel:
Please set as following for: Take off, landing and full-flap flight
Dual rate:
Please set as following for: During the flight
Controls
20