Harman harman/kardon CITATION ADAPT User manual
OWNER’S
MANUAL
CITATION ADAPT
2
/
IMPORTANT SAFETY
INSTRUCTIONS
Verify Line Voltage Before Use
The CITATION ADAPT has been designed for use with 100-
240 volt, 50/60 Hz AC current. Connection to a line voltage
other than that for which your product is intended can create
selling dealer before plugging the unit in to a wall outlet.
Do Not Use Extension Cords
To avoid safety hazards, use only the power cord supplied
used with this product. As with all electrical devices, do not run
power cords under rugs or carpets, or place heavy objects on
Handle the AC Power Cord Gently
pull the plug; never pull the cord.
If you do not intend to use your speaker for any considerable
Do Not Open the Cabinet
center.
3
/
TABLE OF CONTENTS
/IMPORTANT SAFETY INSTRUCTIONS............................................. 2
/INTRODUCTION........................................................................................ 4
/WHAT’S IN THE BOX............................................................................... 5
/PRODUCT OVERVIEW ............................................................................ 6
/PLACEMENT................................................................................................ 11
/CONNECTING TO TV.............................................................................12
/CONNECTING TO OTHER DEVICES ...............................................14
/POWER ON .................................................................................................16
/CONNECTING TO INTERNET ............................................................. 17
/ ............................................................19
/USING YOUR CITATION ADAPT ........................................................21
/SOUND SETTINGS.................................................................................23
/SETTINGS...................................................................................................24
/SPECIFICATIONS.....................................................................................26
/TROUBLESHOOTING............................................................................27
/OPEN SOURCE LICENSE NOTICE .................................................. 29
/TRADEMARKS ......................................................................................... 30
4
/
INTRODUCTION
describes the products and includes step-by-step instructions
to help you set up and get started. Read and understand all the
safety instructions before using your product.
This product may have an important software update
available. Please follow the instructions to connect the
product to Wi-Fi to ensure that your product has the most
recent software updates.
If you have any questions about these products, their
installation or their operation, please contact your
5
/
WHAT’S IN THE BOX
3
21
1. Main unit
2. Power cord*
3. Remote control (with 2 AAA batteries)
* Power cord quantity and plug type vary by regions.
Inserting batteries before using the remote control (AAA
batteries x 2)
Slide the battery cover in the direction of the arrow until it is
that their polarity is correct. Slide the battery cover back into
position.
6
/
PRODUCT
OVERVIEW
Front Panel
2
1
1. Infrared (IR) sensor
2. Touch screen
• : Wi-Fi signal indicator.
• :
• :
•
• :
• :
• :
product.
/ PRODUCT OVERVIEW
7
Back Panel
1 2 3 4 5 6 87
1. ETHERNET
•
2. HDMI IN 1 / HDMI IN 2 / HDMI IN 3 / HDMI IN 4
• Connect to the HDMI output on a digital device.
3. SERVICE (for technical personnel only)
4. OPTICAL IN
• Connect to an optical audio output on your TV or a
digital device.
5. AUX IN
•
6. RESET
• Press and hold for 5 seconds to restore the factory
settings.
7. HDMI TV
•
8. POWER
• Connect to the power supply.
/ PRODUCT OVERVIEW
8
Remote Control
1
3
5
6
7
8
9
4
11
12
13
2
1. (Power)
• Power on or switch to standby.
2. Source zone
• Select an input source: OPTICAL / AUX / HDMI TV /
HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4.
/ PRODUCT OVERVIEW
9
3. MUTE
•
4. VOL + / -
•
• Press and hold to continually increase or decrease the
5. SOUND MODE
• Standard / Music /
Voice / Movie / Personal
•
6. /
•
Bluetooth playback.
7. SURROUND
•
8. BASS - / +
• Turn bass down or up.
9. AUDIO SYNC - / +
• Decrease or increase audio sync delay if the video and
audio synchronization is not correct.
10. NIGHT MODE
•
for Dolby Digital and DTS tracks.
11.
•
/ PRODUCT OVERVIEW
10
12. BT
•
• Press and hold for 3 seconds to pair with a new device.
13. SOURCE
• HDMI TV / HDMI 1 / HDMI 2 /
HDMI 3 / HDMI 4 / Optical / AUX / Bluetooth.
11
/
PLACEMENT
NOTES:
•
product.
•
• Do not place this product on its front, back or top when in use.
• Do not place any objects on top of this product.
Place your Citation Adapt on its rubber feet on a stable and
level surface below your TV.
12
/
CONNECTING TO TV
NOTES:
•
speakers and disable the built-in TV speakers.
•
HDMI (Preferred)
connector on the back of this product to the
connector on your TV.
Press HDMI ARC on the touch screen or press the
TV ARC
HDMI TV HDMI ARC
TV
NOTES:
• An HDMI connection supports digital audio and video with a
single connector. It is the best option to connect to the TV.
• If your TV features an connector, you can enjoy the TV
• This HDMI connection is required if you intend to connect other
video devices to the Citation Adapt inputs to display on your TV.
• On your TV, turn on HDMI-CEC operations. HDMI-CEC is a feature
control for both the TV and the Citation Adapt. See the user
/ CONNECTING TO TV
13
Optical
NOTE:
•
of the optical cable.
Connect the connector on this product to the
connector of your TV with an optical cable
Press on the touch screen or press
the
the
TV
OPTICAL IN
OPTICAL OUT
14
/
CONNECTING TO
OTHER DEVICES
HDMI (Preferred)
single HDMI connection.
connector on the back of this product to the
connector on your digital device.
Press
on the touch screen or press the
select the
.
.
.
HDMI IN 1 HDMI IN 2 HDMI IN 3 HDMI IN 4
HDMI OUT
NOTE:
•
Optical or Analog
Connect the OPTICAL IN or AUX IN connector on this
product to the OPTICAL OUT or AUDIO OUT jack of the
/ CONNECTING TO OTHER DEVICES
15
Press or on the touch screen or press
the or
select the or
OPTICAL OUT
.
.
.
AUX
OPTICAL IN
16
/
POWER ON
NOTES:
• Use the provided power cord only.
•
• When you disconnect the power cord, always pull the plug, never
the cable.
•
Plug one end of the AC power cord into the
connector on the back of this product.
the touch screen will turn on. Alternatively, press on the
POWER
Select your language as instructed on the touch screen for
17
/
CONNECTING TO
INTERNET
Your CITATION ADAPT is required to connect to the Internet
NOTE:
•
the Ethernet cable before plugging in the power cord.
tablet.
Power on your CITATION ADAPT.
ADAPT as instructed in the app. Always follow the
Sign in with your Google account. If you do not have, create
a new one.
Google Home
Google Home
router.
5 m (16.4 ft)
/ CONNECTING TO INTERNET
18
CAUTION:
•
•
• Once this product is connected to the Internet, it will receive a
19
/
SPEAKER SETUP
You can wirelessly pair your CITATION ADAPT with:
•
•
NOTES:
•
or/and CITATION SUB.
•
•
•
between the CITATION ADAPT and CITATION speakers and
Power on your CITATION ADAPT, CITATION TOWER, or /
and CITATION SUB.
Press “Speaker Setup” > “Pairing” > “Surround Setup” or
“Subwoofer Setup” on the touch screen to enter pairing
Æ
connected and “Surround setup successful” or
“Subwoofer connected” will be displayed on the touch
screen.
Æ
speaker and retry the setup.
20
Surround Setup” or
“Subwoofer pairing” again, or reset the CITATION ADAPT.
CITATION SUBCITATION TOWER CITATION TOWER
LED Indicator (CITATION TOWER / CITATION SUB)
• White (Flashing): Pairing
• White (Flashing): Out of range / Lost wireless
connection
• White(Constantfor10secondsandthenlighto):
Wirelessly connected with CITATION BAR
Table of contents
