Haute Decor DCCT0407 User manual

4’ Lightly Flocked Alpine Tree
Pre-Lit w/ 70 ct. Warm White LED Lights
Item # DCCT0407
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
PARTS
LIST
•1 EA. TREE STAND
•1 EA. TREE POLE
•1 EA. TREE SECTION

2 of 4
ASSEMBLY
Carefully remove the contents from the carton and keep the carton for future storage. Be sure to untangle any wires
that may be tangled with other items. (Please DO NOT forcibly remove any contents.)
Step 1: Locate the Tree Stand (see Fig. A) and place it where you are going to set up the tree – ensure that it is on a
level surface and near a dedicated power source. Remove cap from top of stand. THIS PRODUCT IS SUITABLE FOR
INDOOR USE ONLY.
Step 2: Locate the Tree Pole and slide it onto the Tree Stand (see Fig. B). Push the Tree Pole down until it is flush with
the top of the Tree Stand.
Step 3: Locate the Tree Section and slide it down into the Tree Pole (see Fig. C). Make sure it is seated securely.
Step 4: There is a power adapter that is to be guided down through the tree section to the floor. Insert it into a power
outlet in your home or into a U.L. approved extension cord or power strip (not included). Your tree should now be lit.
If some bulbs do not light, please go to the section on TROUBLESHOOTING FOR LIGHTS.
SHAPING
1. Plug in the lights as you are shaping the tree.
2. Remove any packing strap or other packing material that is around the tree section(s) and allow the branches to fall
into place. Some of the branches may catch on one another. If that occurs, slowly press down on each branch until
it falls into its place or gently pull up and out.
3. Shape by layer, starting at the bottom of the tree and working your way up to ensure all branches are shaped.
4. Consult the product photo of the tree during shaping. This tree has a downswept appearance. Offset the tips to hide
the tree’s pole and fill spaces. Continue spreading the tips until they resemble that of a real tree.
5. After shaping the whole tree, step back and take an overall look. Shift branches to fill any gaps. Your tree is now
ready to decorate and enjoy!
CLEANING &CARE
As you will be using the artificial Christmas tree every year, it is essential to keep it in good condition and clean.
•Dust gently using a soft cloth or fabric duster.
•Do NOT use any chemicals or solvents to clean.
•Handle the light sets gently. Do NOT pull or tug light sets as this may inadvertently loosen the bulb.
•Follow all Storage and Safety Instructions.
Fig. A
Fig. B
Fig. C

3 of 4
STORAGE
1. Remove any ornaments and decorations that were added by you and did not come with the tree.
2. Unplug the tree from the power source in your home.
3. Starting with the top, separate the tree section, pole, and stand gently, being sure not to roughly handle as it
could cause damage to the parts.
4. Compress the tree section by squeezing the branches together so that it will fit more easily into the storage box
or container. You can also tie a ribbon or cord around the section to secure the branches closer together for
storage.
5. Place all the parts gently back into the storage box. The box will help prevent the tree from being damaged
should it get bumped in your garage, basement, or other storage location. Tape the box shut to keep out any
dust or insects. When packing up the tree, please ensure that there is no undue strain or stress on the light sets
to ensure they do not get cut, frayed, or damaged.
6. Be sure to store the tree in a cool, dry area free of water and moisture to prevent mold and mildew from
accumulating and a musty odor developing. Exposing your tree to excessive heat or humidity may damage your
tree. DO NOT STORE TREE IN A DAMP AREA OR IN AN AREA WHERE THE TEMPERATURE EXCEEDS 100ºF. STORE
THE CARTON FLAT AND NOT UPRIGHT ON ITS SHORT END.
TROUBLESHOOTING GUIDE FORLIGHTS
If your lights are not working, the following are some troubleshooting steps to try:
1. Check that the power plug is properly connected to your wall outlet or other power source and tap the foot pedal.
2. Check that there is power to the wall outlet or power source.
3. Check that the power adapter is securely connected to the light set plug.
NOTE: LED bulbs are permanent and cannot be removed from the light sets.
IMPORTANT SAFETY
PLEASE READ AND FOLLOW ALL SAFETY INSTRUCTIONS AND WARNING TAGS INCLUDED WITH THIS TREE.
SAVE FOR FUTURE USE.
THIS TREE IS SAFE FOR INDOOR USE ONLY.
• Do not operate this product if the power cord or plug is damaged. Always inspect light sets and electrical cords for
signs of damage or wear. If there are any observable defects, immediately dispose of them and replace it with one
that is in working order.
• Do not immerse the tree or any of its components in water or other liquids.
• Be careful not to overload electrical circuits and do not string more than the manufactured recommended number
of light set cords together.
• This seasonal use product is not intended for permanent installation or use.
• This product is not intended for commercial purposes.
• Do not secure the wiring of this product with staples or nails or place on sharp hooks or nails.
• Do not alter the construction of the wiring in anyway.
• Do not let lamps rest on the supply cord or on any wire.
• Unplug the product when leaving the house, retiring for the night or if left unattended.
• This is an electrical product - not a toy! To avoid risk of fire, burns, personal injury and electric shock, it should not
be played with or placed where small children can reach it.
• Do not use this product for anything other than its intended use.
• Do not hang ornaments or other objects from the cord, wire, or light string.
• Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
• Do not cover the product with cloth, paper, or any material not part of the product when in use.

4 of 4
• Do not mount or support strings in a manner that can cut or damage the wire insulation.
• Do not mount or place near gas or electric heaters, fireplaces, candles, or other similar sources of heat.
• Do not place your tree where it is likely to wobble due to uneven floors or thick carpeting. Place tree on a level,
hard, flat surface.
• This product should not be used with a voltage converter.
FCC
STATEMENT
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
CANADA ICES-003 STATEMENT
This Class B digital apparatus complies with Industry Canada Standard ICES-003. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
CUSTOMER
SERVICE
THANK YOU FOR YOUR PURCHASE!
Comments or questions?
Contact us at 1-877-359-0115
[e-mail]
Haute Decor
PO Box 1594
Allen, TX 75013
©2021 Haute Decor
Made in China