Home Accents Holiday TY066-1414-0 User manual

USEAND CARE GUIDE
15 in and 19 in Lighted Red Burlap Birds with Glitter
THANK YOU
We appreciate the trust and confidence you have placed in Home Accents through the purchase
of this 15 in and 19 in Lighted Red Burlap Birds with Glitter. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line of products available
for your home improvement needs. Thank you for choosing Home Accents!
Guarantee
What is Covered
The product is intended for residential seasonal use for approximately 90 days per year. This
product is covered by a 90 day limited guarantee due to defects in material and workmanship.
Return the product with purchase receipt to the location of purchase for refund within 90 days
of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in
accordance with directions provided on or with the product, burn out of bulbs or LEDs, batteries,
products that have been subjected to unauthorized repair and/or modification and damage caused
by shipping and improper handling, alterations, misuse or accidents. Questions, problems, missing
parts? Before returning to the store, call HomeAccents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
YOW SKU # 691 611
Model # TY066-1414-0
Pre-Assembly
PLANNING ASSEMBLY
Carefully remove all the parts from the box, and place them on a flat surface. Read
the entire manual prior to assembly and identify all the parts included in the package
against the parts list. If any parts are missing or damaged do not attempt assembly.
Contact our customer service center or return to Store. Assembly of this product may
require more than one person.
PACKAGE CONTENTS
Package Contents/Parts List
Part Description Quantity
A Head 2
B Wing 4
C Half of Body 4
D Tail 2
E Pair of Legs 2
F Decorative Collar 2
Package Contents/Parts List
Part Description Quantity
G Cotter pin 2
H Ground Stakes 8
I Spare Fuse 2
J Spare Bulb 6
K Plastic Tie 10
A
B
C
D
EF
G
HK
I J

Assembly
Assembling the Burlap Birds with Glitter
Step1.Insert the metal rod on one half of the Body (C) into the corresponding hole on the other
Half of Body then fasten them with Plastic Ties (K). (FIG.1) - {Repeat steps for the other Bird}
Step 2. Place the Decorative Collar (F) around the neck of Bird. Insert the metal rods of the Head
(A) into the corresponding holes on the Body then fasten them with Plastic Ties. Insert the metal
rods of the Tail (D) into the corresponding holes at the rear end of the Body. Insert the metal rods
of the Pair of Legs (E) into the tubes at the bottom of the Body and secure with the Cotter Pin (G)
provided. Repeat this step for the other Bird.(FIG.2)
Step 3. Insert the metal rod of each Wing (B) into the corresponding hole on each side of the
Body. (FIG.3)
Step 4. Secure each Bird to the ground using the Ground Stakes (H). (FIG.3)
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 28.8 Watts
( 0.24Amps). Do not overload. Do not connect to other lighting strings, decorative
outfit or other electrical products. Before you use or re-use this product inspect it
carefully. Return to Store or discard if the product has cuts, damage or frayed wire
insulation on cords, cracks in the socket enclosures, loose connections or exposed
copper wire.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product, wire and lighting connections. If the product
is placed somewhere other than the ground it should be well secured and stable.
b. Wipe the unit with a damp cloth and allow the unit to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE
A
F
D
E G
B
C
FIG.1 FIG.2
FIG.3