Hawaiian shaved ice S700 User manual

Electric Snow Cone Machine
Model #S700
Instruction Manual

Pg 2 - © 2013 Mary Mack’s, Inc.
SAVE THIS MANUAL FOR FUTURE USE
Registration
You may register this ice shaver through our website at
www.HawaiianShavedIce.com/register.html
Table of Contents
General Warnings 3
Usage Precautions 7
Warranty 9
Assembly/Parts Diagram for S700 (Fig. A) 11
Operation for S700 (Fig. B) 12
Assembly and Use 13
Cleaning 14
Shaved Ice Recipes 15
Mary Mack’s, Inc.
DBA Hawaiian Shaved Ice
321 Goldsboro Street
Newton Grove, NC 28366, USA
1-800-742-8334 –toll free
910-247-4152 –direct
770-234-6333 –fax

Pg 3 - © 2013 Mary Mack’s, Inc.
General Warnings and Safeguards
CAUTION
To prevent property damage and personal injury, it is important that you read
and follow all general warnings, safeguards and instructions.
Read the instructions provided in this booklet carefully because
they give important information with regards to the installation, use
and maintenance. Keep this manual for future reference.
This ice shaver is intended for household use only.
This ice shaver has an extremely sharp blade. You should use
extreme caution during assembly, operation, disassembly and
while cleaning the unit. If the blade becomes broken or loose,
do not use the appliance.
After unpacking the unit and before each use, make sure the
mechanical parts of the unit and all its attachments are intact. Look
for any foreign objects before operating the ice shaver. When in
doubt, do not use the appliance and refer to an authorized repair
center.
To prevent electrical shock to yourself or others, do not immerse
the cord, plugs, motor unit or any other electrical parts in water or
other liquids of any kind.
Use extreme caution to make sure you never place your fingers or
other items into the machine or the machine’s moving parts.

Pg 4 - © 2013 Mary Mack’s, Inc.
Do not operate the machine without ice.
Use this appliance for no more than 2 continuous minutes. Failure
to obey this may cause the ice shaver to overheat. Allow the
appliance motor to cool down before repeat usage.
All packing elements (plastic bags, polystyrene, etc.) should be
kept out of the reach of children because they are potentially
hazardous.
Before plugging the appliance into a power source, make sure the
voltage details marked on the appliance seal/plaque correspond to
those of your power supply. The seal/plaque is located on the
motor unit.
This appliance has a polarized plug (one blade is wider than the
other). As a safety feature, this plug will fit a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician. Do not attempt
to defeat this safety feature.
In the event the wall socket and the appliance plug are not
compatible, have the socket changed by a qualified professional
who must also ensure that the cross section of the socket wiring
corresponds to the power consumed by the appliance. Generally
speaking, adapters, multiple sockets, extension cords and/or drop
cords should not be used. However, if necessary, only use single or
multiple adapters and extension cables which comply with the
existing safety standards, making sure the current carrying capacity
limits marked on the single adapter and on the extension cables as
well as the maximum power limit marked on the multiple adapter
are not exceeded.
Do not use the machine around a hot surface or hot appliances.
Keep the appliance away from stovetops, broilers, ovens or any
other potentially hot appliance. Pay special attention to the
electrical cord to prevent it from touching a hot surface.

Pg 5 - © 2013 Mary Mack’s, Inc.
This appliance must be used only for the purposes it was designed
for, (i.e. for crushing/shaving ice in the home). Any other use must
be considered improper and therefore dangerous. The
manufacturer cannot be held responsible for any damages deriving
from improper, incorrect or unreasonable uses.
The use of any additional accessory attachments not
recommended by HawaiianShavedIce.com is not suggested.
Failure to obey this warning may cause fire, electric shock or injury
to yourself or others.
The use of any electric appliance requires the user to observe basic
rules.
In Particular:
Never touch the appliance with wet or damp hands.
Never use the appliance barefoot.
Never pull the electrical cable or the appliance itself to remove the
plug from the electrical socket.
Avoid all contact with any moving parts of the appliance.
Never leave the appliance exposed to the elements (rain, sunshine,
etc.).
Never let children or those unable to operate the appliance use it
unattended. Do not leave the unit unattended while plugged into a
power source.
Before any cleaning, maintenance, assembly or disassembly,
make sure that the ice shaver is disconnected from the main
power supply by unplugging it.
Should the appliance be out of order and/or operating inefficiently
switch it off and do not attempt to tamper with it. For any repairs,
approach an authorized service center only and request the use of

Pg 6 - © 2013 Mary Mack’s, Inc.
original spare parts. Failure to comply with the above might result in
compromised safety of the appliance.
Should you decide to stop using the appliance, it is advisable to
render it unusable by cutting the electrical cable after unplugging it
from the main power supply.
Furthermore, it is advisable to render all hazardous parts of the
appliance harmless, particularly for children, who might play with
the discarded appliance.
Installation must be carried out in compliance with the
manufacturer’s instructions. Incorrect installation can cause
damage to people, animals or objects for whom the manufacturer
may not be held responsible.
In order to avoid dangerous overheating it is advisable to unwind
the electrical cable completely and use the appliance as
recommended in the “Usage Precautions” paragraph.
Never leave the appliance plugged in when not needed. Unplug
from the power supply plug whenever the appliance is not in use.
Never obstruct the openings or slits for ventilation and heat
dissipation.
Should the electrical cable of this appliance become damaged,
have it replaced by a manufacturer authorized after-sales service
center only because special tools are required.
The manufacturer reserves the right to make any changes
considered necessary for industrial, commercial or design
improvements or to comply with particular standards. It is advisable
to pay particular attention to those warnings highlighted with the
symbol.

Pg 7 - © 2013 Mary Mack’s, Inc.
Usage Precautions
Before using this appliance for the first time or after a long period of
disuse, wash the shaver bowl assembly cup in warm water with
dish soap, rinse and dry thoroughly.
Before each use of the appliance, check that it is mechanically
intact. The motor unit, the shaver bowl assembly and the support
base must not be cracked or broken in any way. The sheath and
the plug should not be cracked or broken. However if they are,
remove the plug immediately from the socket and take the
appliance to an authorized technical center for necessary repairs.
Before plugging in the appliance, check that the switch is not in the
“On” position.
Ensure that the ice shaver and the cable are not too close to the
edge of the table or work surface, that it is not touching heat
sources, and that it is not near a sink.
Never immerse the motor unit in water or other liquids.
Use ice cubes that are made from most residential ice makers.
Commercially produced bagged ice may be used as long as the
cubes are not too big.
Substances other than ice should never be placed in the container
shaver bowl assembly.
Never run the appliance while empty.
Never run the appliance before it has been correctly mounted on its
base.
Never put your fingers into the bowl assembly because the blade is
very sharp and may cause injury.
Do not damage the blade by using metal implements.

Pg 8 - © 2013 Mary Mack’s, Inc.
Do not attempt to sharpen the blades; if necessary, replacement
blades may be purchased. See page 17 of this instruction manual
for ordering information.
To avoid overheating, do not run the appliance for longer than 2
consecutive minutes. If you need to crush a large quantity of ice, do
so in small batches with pauses in between.
Ice Shaver Specifications
Model S700, Electric Ice Shaver –Snow Cone Machine
Power: 120v, 60 Hz, 55W max
ETL approval
Made in China

Pg 9 - © 2013 Mary Mack’s, Inc.
Product Warranty
Ice Shaver 1 Year Limited Warranty
Mary Mack’s, Inc. DBA HawaiianShavedIce.com warrants to the original
purchaser that the Hawaiian Snow Cone Machine (Ice Shaver) # S700 shall
be free from material defects in material and workmanship under normal
household use for a period of one (1) year from the original date of purchase
provided that the ice shaver and all parts thereof are used in accordance
with all of the general warnings, safeguards and instructions found in this
instruction manual.
If the product is determined to be materially defective during the warranty
period, your sole remedy and Mary Mack’s, Inc, sole and exclusive liability
shall be limited to the repair or replacement of this product with a new or
refurbished product at Mary Mack’s, Inc. option. This warranty does not
cover exterior or interior finish or damage caused by misuse, scratching,
accident or negligence.
This warranty is extended only to the original purchaser and does not apply
to commercial use or damage to the product (not resulting from defect or
malfunction) while in the possession of the original consumer. Mary Mack’s,
Inc. claims no responsibility for consequential, foreseeable, incidental, or
commercial losses caused as a result of using this product.
If a problem with this ice shaver develops during the warranty period, please
contact Mary Mack’s, Inc. for service. Send a brief letter explaining the
problem along with a copy of your receipt or other proof of the original
purchase date, which will be required before warranty service is rendered.
Be sure to include your name, address and phone number.

Pg 10 - © 2013 Mary Mack’s, Inc.
Any ice shaver submitted for repair must be sent (transportation charges
prepaid) to the following authorized repair center:
Mary Mack’s, Inc.
Attn: Ice Shaver Repair
321 Goldsboro Street
Newton Grove, NC 28366
If you have any questions concerning the use and/or care of this product or
comments regarding your experience with the product, we would like to hear
from you. Feel free to give us a call at 1-800-742-8334 or email us at
[e-mail].
This warranty is valid in the United States of America and Canada only.

Pg 11 - © 2013 Mary Mack’s, Inc.

Pg 12 - © 2013 Mary Mack’s, Inc.

Pg 13 - © 2013 Mary Mack’s, Inc.
Assembly and Use
1. Always ensure that the appliance is switched off and that it is not
plugged into an electrical outlet before you assemble or dismantle the
ice shaver.
2. Refer to Fig. A, page 11 and Fig. B, page 12 for an assembly diagram,
parts reference and operational diagram.
3. Place the machine base/stand (Fig. A, #S700K) on a flat sturdy counter
or table.
4. Insert the drive gear (Fig. A, #S700H) into the base.
5. Align and insert the exterior bowl (Fig. A, #S700E) in drive gear.
6. Align and insert the gear hoop (Fig. A, #S700D) in the exterior bowl.
7. Align and insert the interior bowl (Fig. A, #S700C) in the exterior bowl.
You may have to slowly spin the interior bowl to ensure that it fits
correctly.
8. Secure the interior bowl to the exterior bowl using the securing nut (Fig.
A, #S700B). Insert the nut in the center of the interior bowl and turn
clockwise.
9. Place an empty bowl (not supplied) on the base of the unit just below
the exterior bowl (Fig. B. 1.). This bowl will be used to collect the
shaved ice.
10.Place fully frozen household ice cubes inside the interior bowl (Fig. B.
1.). Fill the bowl level with ice cubes. Most ice made from residential
ice makers will work. Some commercially bagged ice may work as well.
However, if your ice it too hard and has been in the freezer too long, you
may need to allow the ice cubes to temper or thaw for a few minutes
before shaving. Allowing the ice to temper, the machine will produce a
fluffier snow, which is a common practice with commercial ice shavers
as well.

Pg 14 - © 2013 Mary Mack’s, Inc.
11.Place clear lid (Fig. A, #S700A) on top of the interior bowl while lining up
the lid’s flange.
12.To shave ice, turn the lid counter clockwise (Fig. B. 2.) until the flange
activates the safety switch (Fig. A, #S700G).
13.To stop shaving ice, turn the lid clockwise (Fig. B. 3.) to deactivate the
safety switch.
14.Unplug the ice shaver from the power supply after each use.
15.Add premium syrup from HawaiianShavedIce.com (Fig. B. 4.) to the
shaved ice and enjoy!
Cleaning
Dismantle the appliance in reverse order of the procedure described for
assembly.
While cleaning, use caution and pay special attention to the ice shaver
blade. Avoid all contact with the blade to prevent injury to yourself or
others.
Avoid using abrasive detergents or cloths.
The motor unit may be cleaned with a slightly damp cloth but do not soak
or immerse the motor unit in water or other liquid.
All the machine parts other than the motor assembly (Fig. A) may be
washed in warm water with mild soap and rinsed with water. Do not
wash any of the parts or motor in a dishwasher.
Dry all of the parts paying particular attention to the blade before putting
the appliance away.

Pg 15 - © 2013 Mary Mack’s, Inc.
Have Fun with Shaved Ice Recipes
There is so much more that you can do with shaved ice than just simply
shaving ice into a bowl and adding flavor. Try the great recipes below for
fun and easy treats.
The Classic Shaved Ice –Shave a mountain of fluffy snow into a small
bowl or ice cup. Add premium shaved ice flavor from
HawaiianShavedIce.com and enjoy. The flavor will be absorbed into the ice.
Remember that a little flavor goes a long way. You want to eat shaved ice
with a spoon not with a straw!
Dipped Delight –Take a small bowl or ice cup and add a scoop of vanilla or
your favorite flavor of ice cream to the bottom of the cup. Shave ice on top
of the ice cream and top with your favorite syrup from
HawaiianShavedIce.com. Enjoy the combination treat! A big seller at
shaved ice stands all across the country!
Rainbow Shaved Ice –Shave a mountain of fluffy snow into a small bowl or
ice cup. Take two or more flavors and pour them over the shaved ice to
create a rainbow effect. Try mixing colors like yellow and blue to get a green
stripe down the middle. Very popular!
Slush Drinks –Dilute one part shaved ice syrup to three parts water. Add
the mixture over a tall cup of shaved ice. Pour just enough syrup mixture to
cover the ice to keep it slushy. A great refreshing treat!
Soda Ice –Nothing helps make your favorite soda more refreshing than a
tall cup of shaved ice. Pour your favorite soda over shaved ice and enjoy!

Pg 16 - © 2013 Mary Mack’s, Inc.
Fruit Ice –Instead of shaved ice syrup or soda, try natural fruit juices,
lemonade or even tea over shaved ice. Serve these treats at your next party
and it will be a hit!
Mixed Drinks –Instead of having your alcoholic drink on the rocks, try
serving it over shaved ice. This also works well with margaritas, smoothies
and other frozen drinks!
Shaved Ice Toppings
Sweetened Condensed Milk/Sweet Cream –This is the most popular
topping used at shaved ice stands. Purchase a can of sweetened
condensed milk from your local grocery store. Then simply pour a small
amount of sweetened condensed milk over your flavored shaved ice treat
and enjoy!
Evaporated Milk –If you want to give your shaved ice a creamy flavor, add
a dose of evaporated milk over the top of your flavored shaved ice treat. Mix
gently with a spoon and enjoy! This is especially great with Vanilla, Peach,
Banana, Pina Colada and Coconut.
Marshmallow Topping –Add a dab to your next shaved ice treat to make it
extra special.
Fresh Fruit –Try adding a fruit garnish to your shaved ice treat to make it
tasty! Popular garnishes include cherries, pineapples, bananas, oranges,
lemons and limes.
Other Uses for Shaved Ice –Use shaved ice to make an ice bed for
serving shrimp, seafood or other cold items.

Pg 17 - © 2013 Mary Mack’s, Inc.
Mary Mack’s, Inc.
DBA Hawaiian Shaved Ice
321 Goldsboro Street
Newton Grove, NC 28366, USA
1-800-742-8334 –toll free
910-247-4152 –direct
770-234-6333 –fax