Haztec 8-8120-RC User manual

Haztec International Ltd ∙ Moorfield Road ∙ Leeds ∙ LS19 7BN ∙ UK
T: [phone] ∙ [e-mail] ∙ www.haztec.uk
8-8120-RC
100W Speaker
M214 Issue 1.1 Created by: Technical July 2020
Thank you for purchasing this Haztec product. Before proceeding with installation it is essential
to read and understand this instruction booklet.
Warning!
This product must be installed by persons competent in vehicle installations
Care should be taken to ensure that water ingress cannot occur through mounting or
wiring holes
Regularly inspect and check the product to confirm correct operation
Use only a damp cloth to clean this product
DO NOT direct a high-pressure water jet at this product
DO NOT allow solvents, fuels or acetone-based cleaners etc. to contact this product
Basic Operating Specifications:
Maximum power output:
100 Watts
Impedance:
11 Ohms
Dimensions (mm):
124 (H) x 120 (W) x 121 (D)
Connection Instructions:
Speaker polarity is only valid when more than one speaker is connected to an amplifier. Refer to
the amplifier user manual for further instructions
100W power output
Neodymium driver
Compact design
Heavy duty mounting bracket
2 year warranty

Haztec International Ltd ∙ Moorfield Road ∙ Leeds ∙ LS19 7BN ∙ UK
T: [phone] ∙ [e-mail] ∙ www.haztec.uk
8-8120-RC
100W Speaker
M214 Issue 1.1 Created by: Technical July 2020
Installation Instructions:
Determine a suitable location to mount the speaker. This must be a solid part of the
vehicle capable of supporting the weight of the speaker
Remove the speaker bracket and use it as a template to mark the mounting holes
Drill the holes to a suitable size to accept the mounting bolts
An appropriate customer supplied sealant should be used to prevent water ingress
Attach the bracket securely to the vehicle then mount the speaker and attach the output
wires from the amplifier
It is important to note that the speaker must be mounted so that the driver water drain
hole is positioned facing downwards