HH Vector VRC-210 User manual

USER MANUAL
FULL RANGE ENCLOSURES
WITH A DETACHABLE MIXER

WWW.HHELECTRONICS.COM
INTRODUCTION
2
The HH VRC-210 is designed to be an all-in-one audio solution for a wide variety of
everyday applications – from classroom, dance studio to a business seminar or any kind of
musical performance
This manual contains important information regarding correct and safe operation of your
active system. Please read it thoroughly in order to get the best performance and reliability
from your new HH product.
The HH System VRC-210 – Clarity and Convenience.
The VRC-210 gives you all the ease and convenience of everything you need to get the job
done with the minimum of fuss. Its sleek detachable mixer module offers a wide selection of
inputs/outputs including a Bluetooth® equipped media player. The pair of speaker leads and
power cord that are supplied, are all housed in their own neat clip off module. Both
enclosures include handles and 35mm pole sockets.
CH5/6
5
4
3
2
1
010
9
8
7
65 4
3
2
1
010
9
8
7
65 4
3
2
1
010
9
8
7
65 4
3
2
1
010
9
8
7
65 4
3
2
1
010
9
8
7
65 4
3
2
1
010
9
8
7
6
-5+5
44
33
22
11
0
-5+5
44
33
22
11
0
-5+5
44
33
22
11
0
-5+5
44
33
22
11
05
4
3
2
1
010
9
8
7
6
BASSBASSBASS
PHANTOM POWER
TREBLE
PEAKPEAKPEAKPEAK
TREBLETREBLETREBLE
LEVEL
USB
L
R
CH1CH2CH3CH4
5
4
3
2
1
010
9
8
7
65 4
3
2
1
010
9
8
7
65 4
3
2
1
010
9
8
7
65 4
3
2
1
010
9
8
7
6
-5+5
44
33
22
11
0
-5+5
44
33
22
11
0
-5+5
44
33
22
11
0
-5+5
44
33
22
11
0
EFFECTEFFECTEFFECTEFFECT
BASS
MAXIMUM POWER CONSUMPTION - 500 WATTS
SUPPLY VOLTAGE AND FUSE RATING:
220-240V~ 50/60Hz
T3.15A L 250V
LEVELLEVELLEVELLEVELLEVELMASTER VOLUME
MIX OUT
-5+5
44
33
22
11
0
BASS
TREBLE
-5+5
44
33
22
11
0
EFFECT
DOWNUPSELECT
LR
LIMITER
SIGNAL
POWER
SD
L
R
CAUTION - RISK OF ELECTRIC SHOCK DO NOT OPEN
ATTENTION - LE RISQUE DE DÉCHARGE ÉLECTRIQUE NE S'OUVRENT PAS
LH SPEAKER
RH SPEAKER
CH5/6 + MEDIA PLAYER
LINE
MICLINE MICLINE MICLINE MIC
DESIGNED AND ENGINEEREDIN THE
UK BY WWW.HHELECTRONICS.COM
SN:ABC1234567890
MODEL: VRC-210
CH5/6
5
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
6
-5 +5
4 4
3 3
2 2
1 1
0
-5 +5
4 4
3 3
2 2
1 1
0
-5 +5
4 4
3 3
2 2
1 1
0
-5 +5
4 4
3 3
2 2
1 1
0
5
4
3
2
1
010
9
8
7
6
BASS BASS BASS
PHANTOM POWER
TREBLE
PEAK PEAK PEAK PEAK
TREBLE TREBLE TREBLE
LEVEL
USB
L
R
CH1 CH2 CH3 CH4
5
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
6
-5 +5
4 4
3 3
2 2
1 1
0
-5 +5
4 4
3 3
2 2
1 1
0
-5 +5
4 4
3 3
2 2
1 1
0
-5 +5
4 4
3 3
2 2
1 1
0
EFFECT EFFECT EFFECT EFFECT
BASS
MAXIMUM POWER CONSUMPTION - 500 WATTS
SUPPLY VOLTAGE AND FUSE RATING:
220-240V~ 50/60Hz T3.15A L 250V
LEVEL LEVEL LEVEL LEVEL LEVEL MASTER VOLUME
MIX OUT
-5 +5
4 4
3 3
2 2
1 1
0
BASS
TREBLE
-5 +5
4 4
3 3
2 2
1 1
0
EFFECT
DOWN UP SELECT
L R
LIMITER
SIGNAL
POWER
SD
L
R
LH SPEAKER
RH SPEAKER
CH5/6 + MEDIA PLAYER
LINE
MIC LINE MIC LINE MIC LINE MIC
DESIGNED AND ENGINEEREDIN THE
UK BY WWW.HHELECTRONICS.COM
SN:ABC1234567890
MODEL: VRC-210

WWW.HHELECTRONICS.COM
3
ACCESS TO THE MIXER AND ACCESSORY BOX:
Slide the catch to the left as indicated. Gently tilt the mixer/accessory
box then unhook from the cab.
POWER AND SPEAKER CONNECTIONS
Always switch off and disconnect the power cord when not in use.
MAXIMUM POWER CONSUMPTION - 300 WATTS
SUPPLY VOLTAGE AND FUSE RATING:
220-240V~ 50/60Hz T3.15A L 250V
MAXIMUM POWER CONSUMPTION - 300 WATTS
SUPPLY VOLTAGE AND FUSE RATING:
100-110V~ 50/60Hz T3.15A L 250V
PLEASE NOTE:
The accepted input voltage range is preset to:
This cannot be changed by the user.
Only replace the fuse with the type stated!
The mains inlet, power switch and fuse are located to the right of the mixer.
100-110V~ 50/60Hz or 200-240V~ 50/60Hz.

WWW.HHELECTRONICS.COM
AVAILABLE ONBOARD
EFFECTS:
14
1
1
1
2
CH5/6
5
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
6
-5 +5
4 4
3 3
2 2
1 1
0
-5 +5
4 4
3 3
2 2
1 1
0
-5 +5
4 4
3 3
2 2
1 1
0
-5 +5
4 4
3 3
2 2
1 1
0
5
4
3
2
1
010
9
8
7
6
BASS BASS BASS
PHANTOM POWER
TREBLE
PEAK PEAK
TREBLE TREBLE TREBLE
LEVEL
L
R
CH1 CH2 CH3 CH4
5
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
6
-5 +5
4 4
3 3
2 2
1 1
0
-5 +5
4 4
3 3
2 2
1 1
0
-5 +5
4 4
3 3
2 2
1 1
0
-5 +5
4 4
3 3
2 2
1 1
0
EFFECT
PEAKPEAK
EFFECTEFFECT EFFECT
BASS
LEVEL LEVEL LEVEL LEVEL LEVEL MASTER VOLUME
MIX OUT
-5 +5
4 4
3 3
2 2
1 1
0
BASS
TREBLE
-5 +5
4 4
3 3
2 2
1 1
0
EFFECT
DOWN UP SELECT
L R
LIMITER
SIGNAL
POWER
L
R
CH5/6 + MEDIA PLAYER
LINE
MIC LINE MIC LINE MIC LINE MIC
15
16
17
18
19
20
1
3
1
0
9
04
1-4: MONO INPUT CHANNELS.
6. MIC/LINE SELECTION: Provides the correct internal gain structure for your connected device. The switch is ‘IN’ for
Mic level devices and ‘OUT’ for line level devices.
8. FX SEND: This control determines how much (if any) of each channel is sent through the onboard FX
processor - also see (13).
9. PEAK: Adjust the level controls and signal level from your source(s) so the LED illuminates only briefly on peaks in the
music. Using the system with this LED on all or most of the time will result in poor sound quality.
5. COMBI INPUT: For use with both low level/low impedance devices eg. - mic (200-600ohms), electro-acoustic guitar
or line level devices. This input will accept a balanced/ unbalanced signal via XLR, or 6.35mm jack plug.
10. LEVEL: Controls the channel level to the master volume - also see (20).
12. LEVEL: Control the level of signal from channel 5/6 and a Bluetooth device if connected.
13. FX PROCESSOR: Containing 16 high quality effects, this processor adds the professional touch to your signal chain.
The required effect is chosen using the DOWN/UP buttons and confirmed using the SELECT button.
11. CH 5/6: A multi input line level Stereo channel. Choose from 2x 6.35mm jack, or left/right RCA inputs. Any
combination, or all can be used together.
7. EQ: 2 band active EQ for tonal correction of the signal. Setting both controls to 0 is a good starting point.
16. PHANTOM POWER: Turns on Phantom Power to all Mic channels should it be needed. Please note that the
Phantom will only be applied to the XLR of the Combi inputs.
19. POWER LED: This will illuminate when the unit is powered up.
Phantom power should only be used with condenser mic’s.
20. MASTER VOLUME: Controls the overall level of your VRC-210 system.
14. Master FX level: This control allows for quick overall adjustment of the FX level without having to individually adjust
the Input FX sent control (8).
18. LIMITER LED: This will illuminate when the Limiter is active. The limiter will protect the output stage from potential
overload.
17. MASTER EQ: 2 band active EQ for adjusting the signal. Setting both controls to 0 is a good starting point.
15. MIX OUT: A convenient way of connecting your VRC-210 to another device such as an additional amp/speaker setup
or recording device.
USER INTERFACE
4

WWW.HHELECTRONICS.COM
5
MEDIA PLAYER
4. MODE: Use this to toggle the Media input source between SD/USB and Bluetooth.
7. LOOP: Use this to enable/disable the looped playback modes. When using this button with an SD card
or USB thumb drive, there are 3 options:
1. SD CARD SLOT: Insert your Micro SD card
here.
3. DISPLAY SCREEN
Micro SD card, USB Stick - auto detected upon insertion - if a Micro SD Card is inserted while a USB thumb
drive is already connected, the Micro SC will become the ‘live’ audio source.
5. PREVIOUS: Press to skip to the preceding track.
8. PLAY/PAUSE: Use this control to play or pause your music.
ALL - Plays all the tracks on the root of the device in date order, then the sub folders.
a. Select Bluetooth via the MODE button (4).
b. On your Bluetooth capable device, make sure Bluetooth is enabled. Scan down the list of available devices
- search for: ‘HH VECTOR’ and select. No password required.
Use the onboard player for playing Mp3 encoded audio
tracks from Micro SD card/USB Stick or Bluetooth
device. The media player is automatically powered up
when the amplifier is switched on.
FOD - Plays all track in the current active folder.
CONNECT TO AN EXTERNAL BLUETOOTH DEVICE:
(Automatically detected on insertion, or if removed &
reinserted uses smart technology to resume play from the
previous point).
2. MEMORY STICK SLOT: Connect your USB
thumb-drive here.
ONE - Plays one track repeatedly (cycle to the required track to play using NEXT button (8).
c. Your HH Vector is now connected to your Bluetooth device and can be controlled using the
PLAY/PAUSE, PREVIOUS, NEXT & LOOP BUTTONS.
(Automatically detected on insertion, or if removed &
reinserted uses smart technology to resume play from
the previous point).
NOTE. The Media Player will play the music tracks
on a USB Stick/Micro SD Card in alphabetical /
numerical order.
6. NEXT: Press to skip to the next track.
NOTE. The USB socket is for the playback of
recorded tracks only, not for charging a USB device.
Only one VRC-210 can be paired to your Bluetooth capable device at once, so remember to de-select if you
plan to use a different VRC-210 device next time.
678
5
4
123

WWW.HHELECTRONICS.COM
STAGE PERFORMANCE
6
RH SPEAKER
HOUSE PA SYSTEM.
LH SPEAKER
1
2
CH5/6
5
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
6
-5 +5
4 4
3 3
2 2
1 1
0
-5 +5
4 4
3 3
2 2
1 1
0
-5 +5
4 4
3 3
2 2
1 1
0
-5 +5
4 4
3 3
2 2
1 1
0
5
4
3
2
1
010
9
8
7
6
BASS BASS BASS
PHANTOM POWER
TREBLE
PEAK PEAK
TREBLE TREBLE TREBLE
LEVEL
L
R
CH1 CH2 CH3 CH4
5
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
6
-5 +5
4 4
3 3
2 2
1 1
0
-5 +5
4 4
3 3
2 2
1 1
0
-5 +5
4 4
3 3
2 2
1 1
0
-5 +5
4 4
3 3
2 2
1 1
0
EFFECT
PEAKPEAK
EFFECTEFFECT EFFECT
BASS
LEVEL LEVEL LEVEL LEVEL LEVEL MASTER VOLUME
MIX OUT
-5 +5
4 4
3 3
2 2
1 1
0
BASS
TREBLE
-5 +5
4 4
3 3
2 2
1 1
0
EFFECT
DOWN UP SELECT
L R
LIMITER
SIGNAL
POWER
L
R
CH5/6 + MEDIA PLAYER
LINE
MIC LINE MIC LINE MIC LINE MIC
1
3
04

WWW.HHELECTRONICS.COM
7
SOLO PERFORMANCE
RH SPEAKER
LH SPEAKER
1
2
CH5/6
5
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
6
-5 +5
4 4
3 3
2 2
1 1
0
-5 +5
4 4
3 3
2 2
1 1
0
-5 +5
4 4
3 3
2 2
1 1
0
-5 +5
4 4
3 3
2 2
1 1
0
5
4
3
2
1
010
9
8
7
6
BASS BASS BASS
PHANTOM POWER
TREBLE
PEAK PEAK
TREBLE TREBLE TREBLE
LEVEL
L
R
CH1 CH2 CH3 CH4
5
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
65
4
3
2
1
010
9
8
7
6
-5 +5
4 4
3 3
2 2
1 1
0
-5 +5
4 4
3 3
2 2
1 1
0
-5 +5
4 4
3 3
2 2
1 1
0
-5 +5
4 4
3 3
2 2
1 1
0
EFFECT
PEAKPEAK
EFFECTEFFECT EFFECT
BASS
LEVEL LEVEL LEVEL LEVEL LEVEL MASTER VOLUME
MIX OUT
-5 +5
4 4
3 3
2 2
1 1
0
BASS
TREBLE
-5 +5
4 4
3 3
2 2
1 1
0
EFFECT
DOWN UP SELECT
L R
LIMITER
SIGNAL
POWER
L
R
CH5/6 + MEDIA PLAYER
LINE
MIC LINE MIC LINE MIC LINE MIC
1
3
04

WWW.HHELECTRONICS.COM
SPECIFICATION
8
In the interest of continued development, HH Electronics reserves the right to amend product specification without prior notification.
Amplifier
Power Rating : 2x 500W
Amplifier Type : Class D
Power Supply : SMPS (100-120 or 220-240 fixed)
Features
Inputs :
4x balanced Combi XLR/Jack with mic/line switch, 2x 6.3mm single ended jack inputs, 2x RCA inputs,
Media player with BT 4.1, USB and SD card
Outputs : RCA mix out. 2x 6.3mm Jack speaker outputs
Controls :
CH1-4 gain, 2 band eq, effect send, mic/line switch, CH5-6 gain, Master 16 digital effect section with level,
Master 2 band eq, master volume, Phantom power.
Speaker
HF Driver : 1" Compression Driver
LF Driver : 10" Woofer
Coverage : 90°H X 40°V
Enclosure
Cabinet : Robust polypropylene cabinet with carry handle
Finish : Black
Grille : Powdercoated steel
Other : 35mm Distance Pole Socket
Unit dimensions (HWD) : 49 x 31.5 x 31.5 CM
19.3" x 12.4" x 12.4"
Unit weight : 18.7Kg, 41.2 lbs
Carton dimensions (HWD) : 55.5 x 63.5 x 36.5 CM
21.9" x 25" x 14.4" , 0.129 M3
Packed weight : 19.7Kg, 43.4 lbs

WWW.HHELECTRONICS.COM
BLOCK DIAGRAM
9
CONNECTOR WIRING
GND
3.5MM STEREO JACK
GND
6.35MM UNBALANCED JACK
+(HOT) LEFT
RIGHT
1 GROUND
2 HOT
3 COLD
12
3
1
2
3
1
2
3
12
3
MALE
(FRONT VIEW) (REAR VIEW) (FRONT VIEW) (REAR VIEW)
MALE FEMALE FEMALE
EQ
EQ
BASS TREBLE
BASS TREBLE
WOOFER
MONITOR - L
MONITOR - R
RCA
TWEETER
TWEETER
WOOFER
X-OVER
X-OVER
LIMITER
LIMITER
MASTER
VOLUME
LEVEL
POWER
AMP
POWER
AMP
LEVEL
LEVEL
LEVEL
EQ
EQ
EQ
LEVEL
CH1
CH2
CH3
CH4
CH5/6
LINE INPUT - L
RCA - L
RCA - R
BLUETOOTH
MEDIA PLAYER
SD CARD
LINE INPUT - R
LINE INPUT
MIC INPUT
LINE INPUT
MIC INPUT
LINE INPUT
MIC INPUT
LINE INPUT
MIC INPUT
PEAK
INDICATOR
PEAK
INDICATOR
PEAK
INDICATOR
PEAK
INDICATOR
PEAK
INDICATOR
EQ
BASS TREBLE
BASS TREBLE
BASS TREBLE
BASS TREBLE
FX
LEVEL
FX
LEVEL
FX
LEVEL
MASTER FX
LEVEL
DSP MODULE
FX
LEVEL

WWW.HHELECTRONICS.COM
10
(Stand not included)
35mm pole socket
HINTS AND TIPS
HH VRE cabs can be mounted on the floor, or a suitable pole or tripod. Don't
over-extend poles/tripods; ensure at least 4 x the pole diameter is still inside the
outer pole. Make sure the legs have a good splay on tripods, but do not obstruct
doorways or other access-ways.
UNPACKING
Inspect the product during unpacking, if any damage is found, notify the dealer you
purchased it from immediately. Be sure to save the carton and all packaging materials.
Should you ever need to return the unit back to the dealer use only the original factory
packing. Pack all cables neatly, use cable ties to tidy excess cable length in 'figure-8' not
loops.
If a pole mount is used, make sure that the thumb screw on the cabinet is tight.
After using the amplifier, please adjust the gain controls to their lowest settings,
then the amplifier can be turned off safely. Turn the power switch to the OFF
position and remove the power cord from the electrical source.
NOTE:
ŸUse the minimum cut or boost in EQ. If all bands are boosted or cut, flatten
EQ, re-adjust gain and start again.
Do not connect or disconnect from the input signal source when the amplifier is
turned ON, damage could occur to the amplifier and the speaker.
SWITCHING OFF
ŸUse input gain to set maximum signal level without distortion.
ŸSet up mic levels first, and adjust other equipment to match.
ŸUse electronic safety devices such as circuit breakers.
QUICK TIPS
ŸStart with EQ settings flat and gains low.
ŸMaster volumes should be at zero for switch on and off.
BASIC SETUP
ŸKeep lights away from speakers; heat can cause fires/speaker damage.
ŸLook after your cables. Do not stand equipment on, or run cases over them,
do not tie knots in them and always use them for the correct application (a
signal lead is NOT a speaker lead). Coil and secure with cable ties before
storing.
ŸDon't run cables across access-ways; if you have to, run them above doors or use
approved cable covers.
ŸAvoid damp environments and extremes of temperature for storage and use of
all audio equipment.
ŸBe aware of total power usage. Overloading a mains socket is potentially dangerous,
and likely to cause a power out during use.
ŸAvoid very high onstage levels from backline amps.
ŸKeep power and signal cables apart.
ŸEnsure your equipment is properly loaded and cannot move around during
transit.

WWW.HHELECTRONICS.COM
11

WWW.HHELECTRONICS.COM
12

11 REVISION 1.00
Model number:
Serial number:
Place of purchase:
Date of purchase:
hhelectronics
www.hhelectronics.com
hhelectronics
hhelectronics