Hideez BT0015 User manual

Hideez User Manual
How to use Hideez USB Bluetooth Dongle on macOS
If you haven’t managed to connect your Bluetooth dongle even though
you’ve followed all of the following steps, please contact us to get support.
Our agent will reply back to you with an email within 24 hours.
Before setting up, we are warning you about one thing:
You will lose Bluetooth connectivity in the initial setup process,
and all devices will need to be re-paired.
The re-pairing process only needs to be done once, and they will be remembered. You
will need to set up the dongle once, and all settings will be saved for the future.
Step 1
Delete all paired devices in the list of Bluetooth devices.
Step 2
Insert the Dongle into the USB port and reboot the Mac.
Step 3
Option 1. Commands via Terminal
You can send a special command to the system through the terminal (command line),
which will allow the system to use the Hideez Dongle by default for Bluetooth devices.
Enter the following command in the Terminal window:
sudo nvram bluetoothHostControllerSwitchBehavior=always
Then you'll need to enter the password from your Mac account and press Enter.

Step 4
Restart your Mac.
Step 5
Pull out and insert the Dongle into the USB port.
The next time you turn on your computer, please Pull out and insert the Dongle into the
USB port, and the system will use the Hideez Dongle.
If Hideez Dongle is plugged in, the system will use it for your Bluetooth devices, and if it
is not available, it will reconnect the Bluetooth devices to the system adapter.
To make your system adapter default again, you must open Terminal and enter a
special command to cancel the previous setting:
sudo nvram -d bluetoothHostControllerSwitchBehavior
After restarting the computer, your Mac will use the system Bluetooth adapter
(if available).
Option 2. Bluetooth Explorer utility (only for macOS up to 10.15 Catalina)
1. Install the Bluetooth Explorer: https://developer.apple.com/bluetooth/
Please use this link for free registration and Download - "hardware_io_tools_for_xcode"
where you can find Bluetooth Explorer Application.
macOS 10.7
macOS 10.8
macOS 10.9
macOS 10.10
macOS 10.11
macOS 10.12
macOS 10.13

macOS 10.14
macOS 10.15
2. Follow the instructions from the video.
To check that this option worked, you can follow the instructions from the last section
of this article: "How to check which Bluetooth your Mac is using now?"
How to check which Bluetooth your Mac is using now?
After you set it all up, you can check that dongle is really connected and ready to work.
For that, open up the Apple menu and click “About This Mac” to get started.
In the About This Mac window, click the “System Report” button on the “Overview” tab.
The information about your Bluetooth will be here, and the Manufacturer should be the
same as on the screenshot:
If you have any questions about these instructions or using the Hideez Dongle, please
contact our Support team at [e-mail]. We’ll be happy to help!