highmore Avatar HM-GC002-101 User manual

Issue 1 - 11/10/21
Avatar Gaming Chair
User Manual
Product Ref-HM-GC002-101, HM-GC002-102
HM-GC002-103, HM-GC002-104

APPROXIMATE 1 HOUR
ASSEMBLY TIME
1 PERSON ASSEMBLY
1. The maximum weight that can be placed on this product is 308lbs.
2. Check carefully to ensure correct and complete assembly before using.
3. Don’t allow children to play near the chair as their behaviour is unpredictable. The manufacturer is
not responsible for loss, injury, or damage due to improper actions or use.
4.Do not use corrosive or abrasive materials near the product. Please ensure that the cleaner used will
not pollute the environment.
5. Cleaning should not be attempted by children without supervision.
6. Please make sure there are no hazard sources in your operating environment. e.g., do not leave tools
around. Always be careful to dispose of the packaging materials in order to avoid any possible danger,
e.g. plastic bags may lead to choking hazard to children.
7. We recommend you keep the original packaging of the item in case of the need for return or future
transportation.
8. Do not use outdoors. SAVE THESE INSTRUCTIONS. For Household use only.
This user manual covers the following items:
Avatar Gaming Chair (Green) HM-GC002-101
Avatar Gaming Chair (Grey) HM-GC002-102
Avatar Gaming Chair (Blue) HM-GC002-103
Avatar Gaming Chair (Red) HM-GC002-104
1

1Seat Pad Qty 1
4Tilt Mechanism Qty 1
7Recline Mechanism Arm
Qty 1 Pair
8Side Cover
(Left And Right) Qty 2
9Armrest Qty 1 Pair
10 Gas Lift Piston Qty 1 11 Gas Lift Piston Cover
Qty 1
12
Caster Qty 5
2Backrest Qty 1 3Base Qty 1
2
5Neck Cushion Qty 1 6Lumbar Cushion Qty 1

3
Side Cover Cap
Qty 4 M8(0.79inch) Qty 16 M5(0.31inch) Qty 6 Allen Key Qty 1

Assemble casters to
the underside of base .
Push gas lift piston
into base .
Fit gas lift piston cover
loosely over piston .
Fit neck cushion and
lumbar cushion to the
front of backrest .
Join strap buckles to
secure.
12
12
11
STEP 1
STEP 2
4
3
3
3
2
2
5
5
6
6
11
10
10
10

Assemble recline
mechanism arms to
the back of seat pad
using screws .
Ensuring it is the correct
way round, assemble tilt
mechanism to the
underside of seat pad
using screws .
Assemble arm rests
to the underside of seat
pad using fixings .
B
STEP 3
5
1
7
B
B
B
B
1
1
1
1
STEP 4
4
9
B D
M8(0.79inch) x 8 Allen Key x 1
B D
M8(0.79inch) x 4 Allen Key x 1
9
9
4
Shown Upside Down
Back
Front
Front
Back
77

1
Carefully locate seat pad
over the gas lift
pistion .
Push down Firmly to
secure.
6
STEP 5
1
1
Back
Shown Upside Down
10
10

With help, locate backrest
in between recline
mechanism arms .
Secure using screws .
7
2
B
2
7
STEP 6
B D
M8(0.79inch) x 4 Allen Key x 1
7
7
B

Locate left and right side
covers over recline
mechanism arms .
Secure using screws .
Use side cover caps to
cover the holes.
D
A
8
STEP 7
A
Side Cover
Cap x 4
8
7
C D
M5(0.31inch) x 6
C
C
8
8
A
Allen Key x 1

STEP 8
STEP 9
9
Pull up the handle on the right side under
the seat to raise or lower the seat.
Turn the knob clockwise to decrease the angle,
counter-clockwise to increase the angle.
Rotate the armrest left or right to
adjust the direction, lift the button
to adjust the height.
HEIGHT ADJUSTMENT
2D ARMREST ADJUSTMENT
TILT ADJUSTMENT
Push in the handle to
lock, pull out to unlock
the tilt mechanism.

STEP 10
10
Lift the handle to recline and release it to any desired position.
SEATING ADJUSTMENT

11
If you have questions regarding the operation of you purchase, or in the unlikely event you need to return
the unit because it is faulty or is no longer wanted, please contact our product returns department at
[email protected], or 561-465-0030, Option 0.
Address: Forward Industries, 105 Sourth Narcissus Avenue Suite 412, West Palm Beach, FL 33401