DAM 180 User manual

180180
assembly
range / bent
code / st008
year / 2009

description
Wall-mounted steel shelf.
installation
The xing provided are to be used for
installation onto a brick or plaster wall.
Consult your hardwear supplier for advice on
suitable xings to be used for installation
onto a dry wall.
care and maintenance
Go to www.dokterandmisses.com/care
for specic instructions on how to care
for your product.
contents
1 x steel shelf (Part A)
2 x nail-in screws with wall plugs
2 x plastic cover caps
to install, you will need
1 x Pozidriv (SupaDriv) PZ screwdriver
1 x pencil
1 x spirit level
1 x drill with 6mm drill bit
2 x people (recomended)
x 16
x 16
x 1
b

step 1
Position the shelf against the wall. Use a
spirit level to ensure that it is level. Mark
holes using a pencil.
NOTE: It is easiest to do this in a team of
two people.
step 2
Drill out both holes where marked using a
m6 drill bit.
how to install this product
step 3
1. Align shelf with the holes in the wall.
2. Insert the nail-in srews with wall plugs
through the holes in the shelf and into the
wall.
3. Tighten the screw using a Pozidriv
(SupaDriv) PZ screwdriver.
step 4
Cover the screw heads with the plastic
cover caps provided.
a

thank you for recycling
Please support responsible environmental management by recycling product packaging.
we really do care
We make each product with great care and attention to detail.
If you experience any problems with this product, please let us know.
We are always working to improve on our products.
Your feedback is valuable to us.