Sunjoy D-DN1507SAL User manual

April 2016 Made in China 1 / 3
ASSEMBLY INSTRUCTIONS
D-DN1507SAL 3-Seat Sofa
Warning
Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should
always be followed to reduce the risk of personal injury and damage to the product. Please read all instructions
before assembly and use.
Check all bolts for tightness before use, and periodically check and tighten bolts as necessary.
Important: For technical assistance on assembly or replacement parts, please call Sunjoy Industries at 1(866) 578-6569
from 8:00 AM EST to 8:00 PM PST or email to [email protected] or visit www.sunjoyonline.com to
place your order or fax your parts replacement order form together with your purchase receipt to 1-740-283-3549 for
assistance.
Limited Warranty: The item is warranted to be free from defects in material or workmanship for a period of 12
Months. However, we don't reimburse for transportation or delivery costs, or compensate the individual or any outside
party for assembling or disassembling the product. This limited warranty is extended to the original purchaser and
applies to defects in materials and workmanship of your item, provided the item is maintained with care and used only
for personal residential purposes.

April 2016 Made in China 2 / 3
Parts List
Part# Description QTY
A1 Armrest (right) 1
A2 Armrest (left) 1
B Chair back 1
C Seat panel 1
D Seat cushion 3
E Back cushion 3
F Throw pillow (Large) 2
G Throw pillow (Small) 2
H Lumbar 1
AA Bolt M6x35 6
BB Spring washer M6 8
CC Flat washer M6 8
DD Bolt M6x20 2
EE Bolt M6x20 4
FF Wrench M6 1
ASSEMBLY STEPS
Step 1
Attach Seat panel (C) and
Armrest A1 (A2) together
with Bolt (AA), Spring
washer (BB) and Flat
washer (CC).
Attach Chair back (B)
and Armrest A1/A2
together with Bolt (EE).
Do not tighten these bolts
at this step.

April 2016 Made in China 3 / 3
Step 2
Secure Chair back (B)
and Seat panel (C) with
Bolt (DD), Spring washer
(BB) and Flat washer
(CC).
Tighten all the bolts at
this step.
Step 3
Place Seat cushion (D) on
the assembled chair and
lock the loop and hook.
Place Back cushion (E),
Throw pillow (F), Throw
pillow (G) and Lumbar (H)
respectively.
Now your sofa is ready for
use.

May 2016 (生产日期) Made in China 1 / 3
ASSEMBLY INSTRUCTIONS
D-DN1507SAL Coffee Table
Warning
Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should
always be followed to reduce the risk of personal injury and damage to the product. Please read all instructions
before assembly and use.
Check all bolts for tightness before use, and periodically check and tighten bolts as necessary.
Important: For technical assistance on assembly or replacement parts, please call Sunjoy Industries at 1(866) 578-6569
from 8:00 AM EST to 8:00 PM PST or email to [email protected] or visit www.sunjoyonline.com to
place your order or fax your parts replacement order form together with your purchase receipt to 1-740-283-3549 for
assistance.
Limited Warranty: The item is warranted to be free from defects in material or workmanship for a period of 12
Months. However, we don't reimburse for transportation or delivery costs, or compensate the individual or any outside
party for assembling or disassembling the product. This limited warranty is extended to the original purchaser and
applies to defects in materials and workmanship of your item, provided the item is maintained with care and used only
for personal residential purposes.

May 2016 (生产日期) Made in China 2 / 3
Parts List
Part# Description QTY
A Table top 1
B Table leg 1
C Table skirt 1
AA Bolt M6x15 4
BB Spring washer M6 12
CC Flat washer M6 12
DD Bolt M6x20 8
EE Wrench M6 1
FF Foot pad ( preassembled) 4
ASSEMBLY STEPS
Step 1
Insert Table skirt (C) into Table leg (B)
and secure them with Bolt (AA), Spring
washer (BB) and Flat washer (CC). Do
not fasten them at this step.
Step 2
Insert the assembled Table leg (B) into
Table top (A) and secure them with Bolt
(DD), Spring washer (BB) and Flat
washer (CC). Fasten all the bolts at this
step.
Turn upside the table and adjust the
preassembled Foot pad (FF) where
needed.
Now your coffee table is ready for use.

May 2016 (生产日期) Made in China 3 / 3
Step 3
Place Seat cushion (E), Back cushion (F) and
Lumbar (G) respectively.
Now your rocker is ready for use.

April 2016 Made in China 1 / 3
ASSEMBLY INSTRUCTIONS
D-DN1507SAL Rocker
Warning
Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should
always be followed to reduce the risk of personal injury and damage to the product. Please read all instructions
before assembly and use.
Check all bolts for tightness before use, and periodically check and tighten bolts as necessary.
Important: For technical assistance on assembly or replacement parts, please call Sunjoy Industries at 1(866) 578-6569
from 8:00 AM EST to 8:00 PM PST or email to [email protected] or visit www.sunjoyonline.com to
place your order or fax your parts replacement order form together with your purchase receipt to 1-740-283-3549 for
assistance.
Limited Warranty: The item is warranted to be free from defects in material or workmanship for a period of 12
Months. However, we don't reimburse for transportation or delivery costs, or compensate the individual or any outside
party for assembling or disassembling the product. This limited warranty is extended to the original purchaser and
applies to defects in materials and workmanship of your item, provided the item is maintained with care and used only
for personal residential purposes.

April 2016 Made in China 2 / 3
Parts List
Part# Description QTY
A1 Armrest (right) 1
A2 Armrest (left) 1
B Seat body 1
C Support bar 1
D Connector bar 1
E Seat cushion 1
F Back cushion 1
G Lumbar 1
AA Bolt M6x15 4
BB Spring washer M6 4
CC Flat washer M6 4
DD Bolt M8x25 4
EE Bolt M8x45 4
FF Spring washer M8 (4 preassembled) 12
GG Flat washer M8 (4 preassembled) 12
HH Wrench M6 1
II Iron piece (4 preassembled) 8
JJ Nut M8 (4 preassembled) 8
KK Bolt M8x50 (preassembled) 4
LL Square piece ( preassembled) 2
MM Wrench M8 2
ASSEMBLY STEPS
Step 1
Insert Support bar (C) into Armrest
(A1/A2) and secure them with Bolt (AA),
Spring washer (BB) and Flat washer
(CC).
Insert Connector bar (D) into Armrest
(A1/A2) and secure them with Bolt (DD),
Spring washer (FF) and Flat washer
(GG).

April 2016 Made in China 3 / 3
Step 2
Attach Seat body (B) and
Support bar (C) together with
Bolt (EE), Iron piece (II), Bolt
(JJ), Spring washer (FF), and
Flat washer (GG).
Step 3
Place Seat cushion (E), Back cushion (F) and
Lumbar (G) respectively.
Now your rocker is ready for use.