HIK VISION DS-TCP045-B User manual

0
User Manual
UD06243B
Parking Camera

User Manual of Parking Camera
1
User Manual
COPYRIGHT ©2017 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the
properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries
(hereinafter referred to be “Hikvision”). This user manual (hereinafter referred to be
“the Manual”) cannot be reproduced, changed, translated, or distributed, partially or
wholly, by any means, without the prior written permission of Hikvision. Unless
otherwise stipulated, Hikvision does not make any warranties, guarantees or
representations, express or implied, regarding to the Manual.
About this Manual
This Manual is applicable to Parking Camera.
The Manual includes instructions for using and managing the product. Pictures, charts,
images and all other information hereinafter are for description and explanation only.
The information contained in the Manual is subject to change, without notice, due to
firmware updates or other reasons. Please find the latest version in the company
website (http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of
Hikvision in various jurisdictions. Other trademarks and logos mentioned below are
the properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE
PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND
FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND
HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY,
FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF
THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS,
EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING,
AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN
CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF
PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL
NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK,
HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY
RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL
SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL
RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT
IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE
LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS
PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE
APPLICABLE LAW, THE LATER PREVAILS.

User Manual of Parking Camera
2
Regulatory information
FCC information
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
FCC conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked
with "CE" and comply therefore with the applicable harmonized European
standards listed under the EMC Directive 2014/30/EU, the LVD Directive
2014/35/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collection points. For more
information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot
be disposed of as unsorted municipal waste in the European Union. See the
product documentation for specific battery information. The battery is
marked with this symbol, which may include lettering to indicate cadmium (Cd), lead
(Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a
designated collection point. For more information see: www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

User Manual of Parking Camera
3
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol
Description
Provides additional information to emphasize or
supplement important points of the main text.
Indicates a potentially hazardous situation, which
if not avoided, could result in equipment damage,
data loss, performance degradation, or
unexpected results.
Indicates a hazard with a high level of risk, which
if not avoided, will result in death or serious
injury.
Safety Instructions
Please adopt the power adapter which can meet the safety extra low voltage
(SELV) standard. And source with 12 VDC or 24 VAC (depending on models)
according to the IEC60950-1 and Limited Power Source standard.
If the product does not work properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the camera yourself. (We shall not
assume any responsibility for problems caused by unauthorized repair or
maintenance.)
To reduce the risk of fire or electrical shock, do not expose this product to rain or
moisture.
This installation should be made by a qualified service person and should
conform to all the local codes.
Please install blackouts equipment into the power supply circuit for convenient
supply interruption.
Please make sure that the ceiling can support more than 50(N) Newton gravities if
the camera is fixed to the ceiling.
If the product does not work properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the camera yourself. (We shall not
assume any responsibility for problems caused by unauthorized repair or
maintenance.)
Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions.

User Manual of Parking Camera
4
Preventive and Cautionary Tips
Make sure the power supply voltage is proper before using the camera.
Do not drop the camera or subject it to physical shock.
Do not touch sensor modules with fingers. If cleaning is necessary, use a clean
cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an
extended period of time, put on the lens cap to protect the sensor from dirt.
Do not aim the camera lens at the strong light such as sun or incandescent lamp.
The strong light can cause fatal damage to the camera.
The sensor may be burned out by a laser beam, so when any laser equipment is
being used, make sure that the surface of the sensor not be exposed to it.
Do not place the camera in extremely hot, cold temperatures (the operating
temperature should be between -30°C to 60°C, or -40°C to 60°C if the camera
model has an “H” in its suffix), dusty or damp environment, and do not expose it
to high electromagnetic radiation.
To avoid heat accumulation, good ventilation is required.
Keep the camera away from water and any liquid.
While shipping, the camera should be packed in its original packing.
Improper use or replacement of the battery may result in hazard of explosion.
Please use the manufacturer recommended battery type.

User Manual of Parking Camera
5
Table of Contents
CHAPTER 1 OVERVIEW...................................................................................................................8
1.1 PRODUCT INTRODUCTION .................................................................................................................8
1.2 FEATURES AND FUNCTIONS ...............................................................................................................8
1.3 APPEARANCE AND STRUCTURE...........................................................................................................9
CHAPTER 2 INSTALLATION ........................................................................................................... 11
CHAPTER 3 SYSTEM REQUIREMENT ............................................................................................. 13
CHAPTER 4 NETWORK CONNECTION ........................................................................................... 14
4.1 SETTING THE PARKING CAMERA OVER THE LAN .................................................................................. 14
4.1.1 Wiring over the LAN .......................................................................................................14
4.1.2 Detecting and Changing the IP Address..........................................................................15
4.2 SETTING THE PARKING CAMERA OVER THE WAN.................................................................................16
4.2.1 Static IP Connection ........................................................................................................16
4.2.2 Dynamic IP Connection ...................................................................................................17
CHAPTER 5 ACCESSING TO THE PARKING CAMERA ...................................................................... 20
5.1 ACCESSING BY WEB BROWSERS........................................................................................................20
5.2 ACCESSING BY CLIENT SOFTWARE .....................................................................................................21
CHAPTER 6 CONFIGURING WI-FI SETTINGS.................................................................................. 23
6.1 CONFIGURING WI-FI CONNECTION IN MANAGE AND AD-HOC MODES ....................................................23
6.2 EASY WI-FI CONNECTION WITH WPS FUNCTION................................................................................. 27
6.3 IP PROPERTY SETTINGS FOR WIRELESS NETWORK CONNECTION .............................................................29
CHAPTER 7 CONFIGURING BLUETOOTH ....................................................................................... 30
CHAPTER 8 LIVE VIEW.................................................................................................................. 31
CHAPTER 9 CONFIGURING PARKING CAMERA ............................................................................. 33
9.1 CONFIGURING LOCAL PARAMETERS...................................................................................................33
9.2 CONFIGURING TIME SETTINGS .........................................................................................................34
9.3 CONFIGURING NETWORK SETTINGS ..................................................................................................36
9.3.1 Configuring TCP/IP Settings ............................................................................................36
9.3.2 Configuring Port Settings ................................................................................................37
9.3.3 Configuring PPPoE Settings.............................................................................................38
9.3.4 Configuring DDNS Settings ............................................................................................. 39
9.3.5 Configuring SNMP Settings .............................................................................................42
9.3.6 Configuring 802.1X Settings............................................................................................44
9.3.7 Configuring QoS Settings ................................................................................................45
9.3.8 Configuring UPnP™ Settings ...........................................................................................45
9.3.9 Email Sending Triggered by Alarm ..................................................................................46

User Manual of Parking Camera
6
9.3.10 Configuring NAT (Network Address Translation) Settings...............................................48
9.3.11 Configuring FTP Settings.................................................................................................48
9.4 CONFIGURING VIDEO AND AUDIO SETTINGS .......................................................................................49
9.4.1 Configuring Video Settings .............................................................................................49
9.4.2 Configuring ROI Encoding ...............................................................................................51
9.5 CONFIGURING IMAGE PARAMETERS ..................................................................................................52
9.5.1 Configuring Display Settings ...........................................................................................52
9.5.2 Configuring OSD Settings................................................................................................56
9.5.3 Configuring Text Overlay Settings ...................................................................................56
9.5.4 Configuring Privacy Mask ............................................................................................... 57
9.6 CONFIGURING AND HANDLING ALARMS ............................................................................................58
9.6.1 Configuring Motion Detection ........................................................................................58
9.6.2 Configuring Handling Exception......................................................................................60
CHAPTER 10 CONFIGURING PARKING SPACE DETECTION .......................................................... 62
10.1 CONFIGURING DETECTION RULES ................................................................................................62
10.2 CONFIGURING PARKING SPACE INDICATOR .....................................................................................64
10.3 UPLOADING PICTURES ...............................................................................................................66
10.4 CHECKING PARKING SPACE STATUS ...............................................................................................68
10.5 TYPICAL APPLICATIONS ..............................................................................................................68
10.5.1 Internal Indicator Application .........................................................................................68
10.5.2 Alternate Indicator Control Application ..........................................................................69
10.5.3 External Indicator Application......................................................................................... 70
10.5.4 Special Parking Space Application ..................................................................................71
CHAPTER 11 CONFIGURING STORAGE SETTINGS....................................................................... 72
11.1 CONFIGURING NAS SETTINGS..................................................................................................... 72
11.2 CONFIGURING RECORDING SCHEDULE ..........................................................................................74
CHAPTER 12 PLAYBACK ............................................................................................................. 76
CHAPTER 13 SEARCHING LOG.................................................................................................... 78
CHAPTER 14 OTHERS................................................................................................................. 79
14.1 MANAGING USER ACCOUNTS .....................................................................................................79
14.2 CONFIGURING RTSP AUTHENTICATION.........................................................................................80
14.3 CONFIGURING ANONYMOUS VISIT ...............................................................................................81
14.4 FILTERING IP ADDRESS...............................................................................................................82
14.5 VIEWING DEVICE INFORMATION ..................................................................................................83
14.6 MAINTENANCE ........................................................................................................................84
14.6.1 Rebooting the Camera ....................................................................................................84
14.6.2 Restoring Default Settings ..............................................................................................84
14.6.3 Exporting/Importing Configuration File..........................................................................84
14.6.4 Upgrading the System.....................................................................................................85

User Manual of Parking Camera
7
14.7 CONFIGURING RS-485 SETTINGS ................................................................................................85
14.8 CONFIGURING SERVICE SETTINGS ................................................................................................86
APPENDIX ........................................................................................................................................ 87
APPENDIX 1SADP SOFTWARE INTRODUCTION.............................................................................................87
APPENDIX 2PORT MAPPING.....................................................................................................................90

User Manual of Parking Camera
8
Chapter 1Overview
1.1 Product Introduction
DS-TCPX4X(D)(-KB) series parking camera is the smart camera developed for the
parking lot. It is applied in the parking guidance and find my car system to detect
whether the parking space is occupied or not. It is integrated with parking space status
indicator which can indicates red, green, yellow, blue, cyan, white and magenta
colors.
The camera can be widely applied in the environment with low illumination but
requirement of high-quality image, such as underground garage, bar, upscale hotel,
commercial complex, garden, etc. The applicable models and the corresponding
functions are shown as below.
Model
Description
DS-TCP045(-B)
0.7 MP single-lens parking camera with 4 mm or 6 mm lens
selectable, monitoring 1 parking space of 1 direction; Embedded
parking space status indicator; Optional iBeacon module for
indoor positioning and navigation.
DS-TCP145(-KB)
1.3 MP single-lens parking camera with 4 mm or 6 mm lens
selectable, monitoring 2 or 3 parking spaces of 1 direction;
Embedded parking space status indicator; Optional iBeacon
module for indoor positioning and navigation; Optional
controllable external indicator of multi-interfaces.
DS-TCP345(-KB)
3.0 MP single-lens parking camera with 2.8 mm or 4 mm lens
selectable, monitoring 2 or 3 parking spaces of 1 direction;
Embedded parking space status indicator; Optional iBeacon
module for indoor positioning and navigation; Optional
controllable external indicator of multi-interfaces.
DS-TCP345D(-B)
3.0 MP dual-lens parking camera with 2.8 mm lens, monitoring 6
parking spaces of 2 directions; Embedded parking space status
indicator; Optional iBeacon module for indoor positioning and
navigation.
–K means multi-interfaces. The models with –K can connect the parking space
indicators. –B means iBeacon function. D means dual lens.
The use manual mainly describes DS-TCP145 series parking cameras.
1.2 Features and Functions
HD 0.7/1.3/3.0 MP camera and applicable to the low-illumination scene like

User Manual of Parking Camera
9
parking lot;
3D DNR technology can effectively reduce the image noise;
Integrated with the VCA function to intelligently detect the parking space status;
Adopts the energy-saving LED with high brightness and low consumption;
Two network interfaces supporting network power supply and camera network
cascade;
Embedded iBeacon module supporting indoor personnel positioning. It can
realize navigation when used with APP to provide mobile iOS SDK or Android
SDK;
Supports accessing by the web browser (Google Chrome, IE) to realize the live
view, parameters configuration, status check and network storage;
ROI encoding;
Dual-stream;
Remote upgrade and maintenance;
Supports network connection with easy installation and maintenance.
1.3 Appearance and Structure
The structure of parking camera is shown as below.
Figure 1-1 Parking Camera Structure
The combination cable includes three interfaces for indicator control, one 12 VDC
power supply interface, and two network interfaces, as shown below.

User Manual of Parking Camera
10
Figure 1-2 Combination Cable Description
For the lens component, if there are two groups of lens, the camera is dual-lens
parking camera. If there is only one lens, the camera is single-lens parking camera.
Indicator Control Wiring
When installing external indicator, face the male connector to the female connector,
and then connect the lines of external indicator to the male connector according to the
5V and RGB sequence marked on the female indicator.
Figure 1-3 Indicator Control Interfaces
Two Network Interfaces
The two network interfaces design supports network power supply and camera
network cascade (Any adjacent two cameras can be connected via network. Multiple
cameras can be connected in the hand-in-hand mode as shown below.).
Figure 1-4 Dual Network Interfaces Hand-in-Hand Mode Connection

User Manual of Parking Camera
11
Chapter 2Installation
Before you start:
Make sure the device is intact and all the components are complete.
Purpose:
The parking camera can be installed on various types of bearing body. The installation
below takes the example of installing the camera on bridge. Make sure the bridge
installation is done before installing the parking camera. Refer to the following steps
for parking camera installation.
The bridge should be thick enough, and the weight capacity of bridge should be 3
times of the total weights of parking cameras at least.
Steps:
1. Punch a hole on the bridge. The diameter of the hole should be a little larger than
that of the stud on the bottom of the parking camera (30 mm).
Figure 2-1 Punch a Hole
2. Install the parking camera. Pass the integration cable on the bottom of the camera
through the hole on the bridge, and embed the stud to the hole.
Figure 2-2 Install Parking Camera
3. Install the clamp nut. Pass the clamp nut of the parking camera through the
integration cable, ring the nut to the stud, and rotate it to the end clockwise to fix
the camera to the bridge.

User Manual of Parking Camera
12
Figure 2-3 Install Clamp Nut
Before rotating the clamp nut, adjust the camera angle according to the horizontal
direction shown in Figure 2-3.
4. Remove the side cover of the parking camera. Rotate the lens component
according to the vertical direction shown in Figure 2-4 to adjust the pitch angle of
the lens. 0 to 30°is supported.
Figure 2-4 Remove Side Cover and Adjust Pitch Angle of Lens
5. Connect the circuit of the parking camera. Adjust the camera image to the
required scene. Install the side cover to the parking camera.

User Manual of Parking Camera
13
Chapter 3System Requirement
Operating System: Microsoft Windows XP SP1 and above version / Vista / Win7 /
Server 2003 / Server 2008 32bits
CPU: Intel Pentium IV 3.0 GHz to Core i7-4000 series or higher, depending on
different video resolutions
RAM: 1G or higher
Display: 1024×768 resolution or higher
Web Browser: Internet Explorer 7.0 and above version, Safari 5.02 and above
version, Mozilla Firefox 3.5 and above version and Google Chrome8 and above
versions.

14
Chapter 4 Network Connection
Before you start:
If you want to set the parking camera via a LAN (Local Area Network),
please refer to Section 4.1 Setting the Parking Camera over the LAN.
If you want to set the parking camera via a WAN (Wide Area Network),
please refer to Section 4.2 Setting the Parking Camera over the WAN.
4.1 Setting the Parking Camera over the LAN
Purpose:
To view and configure the camera via a LAN, you need to connect the parking
camera in the same subnet with your computer, and install the SADP or
iVMS-4200 software to search and change the IP address of the parking camera.
For the detailed introduction of SADP, please refer to Appendix 1.
4.1.1 Wiring over the LAN
The following figures show the two ways of cable connection of a parking
camera and a computer:
To test the parking camera, you can directly connect the parking camera to
the computer with a network cable as shown in Figure 4-1.
Refer to the Figure 4-2 to set parking camera over the LAN via a switch or
a router.
Parking Camera PC
Network Cable
Figure 4-1 Direct Connection
Parking Camera Switch or Router PC
Network Cable Network Cable
Figure 4-2 Connection via a Switch or a Router

User Manual of Parking Camera
15
4.1.2 Detecting and Changing the IPAddress
You need the IP address to visit the parking camera.
Steps:
1. To get the IP address, you can choose either of the following methods:
Use SADP, a software tool which can automatically detect the online
parking cameras in the LAN and list the device information including
IP address, subnet mask, port number, device serial number, device
version, etc., shown in Figure 4-3.
Use the iVMS-4200 client software to list the online devices. Please
refer to the user manual of iVMS-4200 client software for detailed
information.
2. Change the IP address and subnet mask to the same subnet as that of your
computer.
3. Enter the IP address of parking camera in the address field of the web
browser to view the live video.
The default IP address is 192.0.0.64 and the port number is 8000.
For accessing the parking camera from different subnets, please set the
gateway for the parking camera after you logged in. For detailed
information, please refer to Chapter 9.3.1 Configuring TCP/IP Settings.
STRONG PASSWORD RECOMMENDED–We highly recommend you
create a strong password of your own choosing (Using a minimum of 8
characters, including at least three of the following categories: upper case letters,
lower case letters, numbers, and special characters.) in order to increase the
security of your product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password monthly or weekly
can better protect your product.

User Manual of Parking Camera
16
Figure 4-3 SADP Interface
4.2 Setting the Parking Camera over the WAN
Purpose:
This section explains how to connect the parking camera to the WAN with a
static IP or a dynamic IP.
4.2.1 Static IP Connection
Before you start:
Please apply a static IP from an ISP (Internet Service Provider). With the static
IP address, you can connect the parking camera via a router or connect it to the
WAN directly.
Connecting the parking camera via a router
Steps:
1. Connect the parking camera to the router.
2. Assign a LAN IP address, the subnet mask and the gateway. Refer to
Section 4.1.2 Detecting and Changing the IP Address for detailed IP
address configuration of the camera.
3. Save the static IP in the router.
4. Set port mapping, e.g., 80, 8000, and 554 ports. The steps for port mapping
vary according to the different routers. Please call the router manufacturer
for assistance with port mapping.
Refer to Appendix 2 for detailed information about port mapping.

User Manual of Parking Camera
17
5. Visit the parking camera through a web browser or the client software over
the internet.
Parking Camera
Network
Cable
Router with Static IP
PC
Network
Cable
Network
Cable
Internet
Figure 4-4 Accessing the Camera through Router with Static IP
Connecting the parking camera with static IP directly
You can also save the static IP in the camera and directly connect it to the
internet without using a router. Refer to Section 4.1.2 Detecting and Changing
the IPAddress for detailed IP address configuration of the camera.
Parking Camera
PC
Network
Cable
Network
Cable
Internet
Figure 4-5 Accessing the Camera with Static IP Directly
4.2.2 Dynamic IP Connection
Before you start:
Please apply a dynamic IP from an ISP. With the dynamic IP address, you can
connect the parking camera to a modem or a router.
Connecting the parking camera via a router
Steps:
1. Connect the parking camera to the router.
2. In the camera, assign a LAN IP address, the subnet mask and the gateway.
Refer to Section 4.1.2 Detecting and Changing the IP Address for detailed
LAN configuration.
3. In the router, set the PPPoE user name, password and confirm the password.
STRONG PASSWORD RECOMMENDED–We highly recommend you
create a strong password of your own choosing (Using a minimum of 8
characters, including at least three of the following categories: upper case letters,
lower case letters, numbers, and special characters.) in order to increase the
security of your product. And we recommend you reset your password regularly,

User Manual of Parking Camera
18
especially in the high security system, resetting the password monthly or weekly
can better protect your product.
4. Set port mapping. E.g. 80, 8000, and 554 ports. The steps for port mapping
vary depending on different routers. Please call the router manufacturer for
assistance with port mapping.
Refer to Appendix 2 for detailed information about port mapping.
5. Apply a domain name from a domain name provider.
6. Configure the DDNS settings in the setting interface of the router.
7. Visit the camera via the applied domain name.
Connecting the parking camera via a modem
Purpose:
This camera supports the PPPoE auto dial-up function. The camera gets a public
IP address by ADSL dial-up after the camera is connected to a modem. You
need to configure the PPPoE parameters of the parking camera. Refer to
Chapter 9.3.3 Configuring PPPoE Settings for detailed configuration.
Figure 4-6 Accessing the Camera with Dynamic IP
The obtained IP address is dynamically assigned via PPPoE, so the IP address
always changes after rebooting the camera. To solve the inconvenience of the
dynamic IP, you need to get a domain name from the DDNS provider (E.g.
DynDns.com). Please follow the steps below for normal domain name
resolution and private domain name resolution to solve the problem.
Normal Domain Name Resolution
Figure 4-7 Normal Domain Name Resolution
Steps:
1. Apply a domain name from a domain name provider.
2. Configure the DDNS settings in the DDNS Settings interface of the
parking camera. Refer to Chapter 9.3.4 Configuring DDNS Settings for

User Manual of Parking Camera
19
detailed configuration.
3. Visit the camera via the applied domain name.
Private Domain Name Resolution
Figure 4-8 Private Domain Name Resolution
Steps:
1. Install and run the IP Server software in a computer with a static IP.
2. Access the parking camera through the LAN with a web browser or the
client software.
3. Enable DDNS and select IP Server as the protocol type. Refer to Chapter
9.3.4 Configuring DDNS Settings for detailed configuration.