Hillsdale Furniture 90008 User manual

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
Date: 10-06-2015
Page 1 of 2
DAYBED SUSPENSION DECK – UPSABLE
Model #90008
STEP 1
Begin assembly by examining all pieces to ensure they have not been damaged during shipping. Insert
each Support Pole (J) into ONE Bed Frame (G) by sliding in place and inserting the end into the open
hole on the inside of the frame. Once in place carefully guide the REMAINING Bed Frame (G) in place by
sliding each pole in place. See next page for more assembly instructions.
HARDWARE LIST
A (4) M6 x 56mm Allen Bolts
B (8) M6 x 30mm Allen Bolts
C (1) Allen Wrench
D (12) Hex Nuts
E (24) Flat Washers
F (1) Hex Wrench
PARTS LIST
G (2) Bed Frames
H (4) Connectors
I (4) Frame Plates
J (4) Support Poles
QTYPART
1C
24E
HARDWARE QTYPART HARDWARE
12
1
D
F
4A 8B
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
J
J
J
J
G

DAYBED SUSPENSION DECK – UPSABLE
Model #90008
Date: 10-06-2015
Page 2 of 2
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
AA
D
D
E
E
E
E
G
G
STEP 2
Secure each Bed Frame (G) together using the 4 Connectors (H). Fit together and secure in place with
1 Allen Bolt (A), 1 Flat Washer (E), on the other side 1 Flat Washer (E) & 1 Hex Nut (D). Tighten all
bolts and nuts using the Allen and Hex Wrenches (C & F) that have been provided.
STEP 3
Attach each Frame Plate (I) to the end of each Bed Frame (G) by aligning holes and securing with 2 Allen
Bolts (B), 2 Flat Washers (E) from the inside and 2 Flat Washers (E) & 2 Hex Nuts (D) from the outside.
Only hand tighten bolts and nuts.
STEP 4
Attach the Mattress Frame to each post included
with your bed purchase using the hardware included
with the bed/daybed. Once each frame end has
been secured in place, tighten all bolts and nuts
from Step 3 using the hardware provided.
I
I
I
I
G
G
G
G
HH
HH
H
This illustration shows
the frame upside down.
This Side Up
DD
E
E
BB
G
EE
I