fantastic furniture Havana Bed King Single MK2 User manual

Version 1.0
Havana
Bed King Single MK2 Light Oak
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2
Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
!Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Parts list
Rail (P1);
2 x Rails (P2);
Rail (P3);
Rail (P4);
Back Panel (P5);
2 x Side Rails (P6);
2 x Side Covers (P7);
Rail (P8);
Rail (P9);
Rail (P10);
Back Panel (P11);
13 x Slats (P12);
Hardware pack
What you need
to assemble the product
Other tools you need:
Phillips Head Screwdriver;
Hammer
Page 4
DO NOT USE
fantasticfurniture.com.au
Side Cover
(P7)
Side Cover
(P7)
Side Rail
(P6)
Side Rail
(P6)
Slats
(P12)
Rail
(P1)
Rail
(P8)
Rail
(P2)
Rail (P2)
Back
Panel
(P5)
Back
Panel
(P11)
Rail
(P3)
Rail
(P9)
Rail
(P4)
Rail
(P10)
32 x Dowels
(H1)
12 x Cam
Nuts
(H4)
1 x Allen
Key
(H10)
12 x Cam
Bolts
(H3)
26 x Screws
(H2)
1 x Spanner
(H12)
8 x Nuts
(H11)
8 x Large
Hole
Stickers
(H13)
8 x Small Hole
Stickers
(H14)
12 x Threaded
Rods
(H6)
4 x Hexagonal
Bolts
(H7)
16 x Half
Round
Nuts
(H5)
16 x Hexagonal
Nuts
(H8)
4 x Plastic
Glides
(H9)
4 x Washers
(H15)

You will need
Step 1
Step 2
You will need
Insert 4 x dowels (H1) into rail (P2). Attach rails (P3, P4) to rail (P2) and secure using
2 x half round nuts (H5) and 2 x hexagonal nuts (H8), tightening with spanner (H12).
(P1)
(P3)
(P3)
(P4)
(P4)
(P2)
fantasticfurniture.com.au Page 5
Insert 4 x nuts (H11) into the holes in rails (P1, P3, P4). Ensure the lines in the nuts (H11) face
incoming threaded rods as shown in the image above. Attach 4 x threaded rods (H6) to
the 4 x nuts (H11) and hand tighten by turning clockwise.
H6
H11
H6
H11
H6
H11
H6
H11
4 x Nuts
(H11)
4 x Threaded
Rods (H6)
H1
H1
H1
H1
H12
H5
H8
1 x Spanner
(H12)
2 x Half Round
Nuts (H5)
2 x Hexagonal
Nuts (H8)
4 x Dowels
(H1)
√
×

Step 3
(P3)
(P3)
(P5)
(P4)
(P4)
(P1)
Slide back panels (P5) into the grooves of rails (P3, P4).
You will need
Step 4
Insert 4 x dowels (H1) into rails (P3, P4). Attach rail (P1) to rails (P3, P4) and
secure using 2 x half round nuts (H5) and 2 x hexagonal nuts (H8), tightening
with spanner (H12).
fantasticfurniture.com.au Page 6
H5
H12
H8
1 x Spanner
(H12)
2 x Half Round
Nuts (H5)
4 x Dowels
(H1)
H1
H1
H1
H1
2 x Hexagonal
Nuts (H8)

(P3)
(P10)
(P9)
(P4)
fantasticfurniture.com.au Page 7
You will need
Step 5
Attach 2 x plastic glides (H9) to end of rails (P3, P4) by gently tapping with a hammer.
You will need
Step 6
Insert 4 x nuts (H11) into the holes in rails (P9, P10). Ensure the lines in the nuts (H11) face
incoming threaded rods as shown in the image above. Attach 4 x threaded rods (H6) to
the 4 x nuts (H11) and hand tighten by turning clockwise.
H6
H11
H6
H11
2 x Plastic
Glides (H9) Hammer
H9
H9
√
×
H6
H6
H11
H11
4 x Nuts
(H11)
4 x Threaded
Rods (H6)

(P10)
(P2)
(P10)
(P11)
(P9)
(P9)
fantasticfurniture.com.au Page 8
Step 8
Slide back panel (P11) into the grooves of rails (P9, P10).
Insert 4 x dowels (H1) into rail (P2). Attach rails (P9, P10) to rail (P2) and secure
using 2 x half round nuts (H5) and 2 x hexagonal nuts (H8), tightening
with spanner (H12).
H12
H5
H8
Step 7
You will need
1 x Spanner
(H12)
2 x Half Round
Nuts (H5)
4 x Dowels
(H1)
H1
H1
H1
H1
2 x Hexagonal
Nuts (H8)

You will need
Step 9
(P10)
(P8)
(P9)
H5
H12
H8
fantasticfurniture.com.au Page 9
Insert 4 x dowels (H1) into rails (P9, P10). Attach rail (P8) to rails (P9, P10) and secure using 2 x
half round nuts (H5) and 2 x hexagonal nuts (H8), tightening with spanner (H12).
Attach 4 x threaded rods (H6) into rails (P9, P10). Attach 2 x plastic glides (H9) to the
end of rails (P9, P10) by gently tapping with a hammer. Attach 4 x small hole stickers (H14)
to the holes of rails (P9, P10).
H1
H1
H1
H1
1 x Spanner
(H12)
2 x Half Round
Nuts (H5)
4 x Dowels
(H1)
You will need
Step 10
2 x Plastic
Glides (H9)
4 x Threaded
Rods (H6)
Hammer
Phillips Head
Screwdriver
4 x Small Hole
Stickers (H14)
(P9)
H6
H6
H14
H14
H9
(P10)
H9
H6 H6
H14
H14
2 x Hexagonal
Nuts (H8)

(P7)
(P6)
(P7)
fantasticfurniture.com.au Page 10
Insert 2 x dowels (H1) into the side cover (P7). Attach 6 x cam bolts (H3) into 1 x side cover (P7),
tightening with a phillips head screwdriver.
Insert 6 x cam nuts (H4) into the holes on the side rail (P6). Rotate the cam nuts so the
arrows point towards the incoming cam bolts. Attach the side rail (P6) to the side cover (P7),
then tighten the cam nuts with a phillips head screwdriver. Repeat step 11 and step 12 for
the other side cover (P7) and side rail (P6).
You will need
Step 11
12 x Cam
Bolts (H3)
Phillips Head
Screwdriver
4 x Dowels
(H1)
x2
x2
H3
H3
H3
H3
H3
H3
H1
You will need
Step 12
12 x Cam
Nuts (H4)
Phillips Head
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
H4
H1
H4
H4
H4
H4
H4