Hillsdale Furniture Counter Stool 6318-826 User manual

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all components are
in proper posion, ght and free from damage. Keep this assembly instrucon for future reference. Adult assembly is required. The product of Hillsdale Furniture,
LLC is designed for residenal use only. Customer Service Phone Number: 502-562-0000
Date: 01-12-2017
Page 1 of 2
Wakefield Swivel Stool
Model #6318-826 Counter Stool
Model #6318-830 Barstool
QTYCODE HARDWARE
10
4
2
16
16
1
1
2
3
4
5
6
1/4” x 5/8” Allen Bolts
1/4” x 1-1/2” Allen Bolts
1/4" x 1” Allen Bolts
Φ9 x Φ7 x 1mm (1/4") Spring Washers
Φ13 x Φ6.2 x 1mm (1/4") Flat Washers
1/4” Allen Wrench
QTYCODE COMPONENTSCOMPONENTS
1A
CODE
B BackSeat
QTY
1
HDFBP
1C D Boom Leg PanelTop Leg Panel 1
ESupport Ring1
E
A
B
CD
• Place the parts and assemble on a flat, non-abrasive and
so surface such as a carpet or cardboard to avoid
damaging the item. Seek assistance to assemble bulky or
heavy items. Aer final alignment, make sure all bolts
and nuts are securely ghtened with screw head covers
pressed in place.
• Do not fully ghten the bolts unl assembly is completed
and alignment is correct.
• Do not crawl or stand on the product.
• Do not set or lay heavy items on the product.
• Do not place hot items on the product.
• Periodic checks are recommended to make sure that all
hardware is securely ghtened and stable for designed use.
WARNING
Read these instrucons thoroughly before assembling and using.
Failure to do so may result in faulty assembly and potenal injury!
Care and Maintenance
Store furniture in an upright posion.
Be careful to never allow water to build up in frames as this will
cause corrosion and freeze damage in cold climates. Wash all
frames with a soluon of mild soap and water. Rinse with clean
water and dry with a so absorbent cloth towel. If your set
includes cushions, they may be cleaned by hand with a soluon
of soap and water and then rinsed with clean water. Never
machine wash or dry cushions. Do not use bleach or solvents
to clean any product! Periodic checks are recommended to
make sure that all hardware is securely ghtened and stable for
designed use. It is recommended to store or cover furniture
when not in use to extend the life of the product.
A failure to properly follow assembly instrucons and care and
maintenance will void the warranty.

5
4
1
5
4
3
FIGURE 3
5
5
5
Date: 01-12-2017
Page 2 of 2
Wakefield Swivel Stool
Model #6318-826 Counter Stool
Model #6318-830 Barstool
2
4
4
4
C
D
C
1
1
FIGURE 1
A
D
E
B
A
FIGURE 2
STEP 1 - Figure 1
Begin assembly by crossing the Top Leg Panel (C) over the Boom Leg Panel (D).
STEP 2 - Figure 2
Aach Seat (A) to Back (B) using 2 Allen Bolts (3), 2 Spring Washers (4) and 2 Flat
Washers (5) from the outside and 2 Allen Bolts (1), 2 AWashers (4) and 2 Flat
Washers (5) from the inside.
STEP 3 - Figure 3
Next aach Support Ring (E) to the leg panels with 2 Allen Bolts (1), 2 Spring
Washers (4) and 2 Flat Washers (5) per leg. Tighten all bolts with Allen Wrench (6)
provided.
STEP 4 - Figure 3
Next aach Leg Panels (C & D) to Seat (A) using 4 Allen Bolts (2), 4 Spring Washers
(4) and 4 Flat Washers (45). Tighten all bolts with Allen Wrench (6) provided. The
assembly is now complete.