Hiniker 6000 User manual

Page I
SERIES 6000 ROW CULTIVATOR
11/10
PART NUMBER 81004224 Rev. E
HINIKER
ROW CULTIVATOR
SERIES 6000
INDEX
SERIAL NUMBER ENDING 100 OR HIGHER
SECTION 1 RIGID SERIES ROW CULTIVATOR
SECTION 2 FOLDING SERIES ROW CULTIVATOR
SECTION 3 HYDRAULICS
SECTION 4 COMPONENT PARTS BREAKDOWN
SECTION 5 OPTIONAL EQUIPMENT

It is the policy of Hiniker Company to constantly
improve its products whenever it is practical to
do so.
Hiniker Company must therefore reserve the
right to redesign or change its equipment or
component parts thereof without incurring the
obligation to install or furnish such changes on
the equipment previously delivered.
INSTRUCTIONS FOR ORDERING PARTS
1. The item numbers in the illustrations corre-
spond to the same item numbers in the de-
scription list. An assembly having a part
number can be ordered. All other parts must
be ordered individually. The quantity in the
“number required” column is the number of
parts used in this area of the machine. The
term “A/R” for number required indicates “as
required” where the quantity may vary. Or-
der all parts by their number and name. Do
not use the item number.
2. All references to left and right, front and rear
apply to the machine as viewed from the
rear of the machine, facing forward in the
direction of travel.
3. Always mention the identication number of
the model and serial numbers found on the
name plate of the unit on which the part is to
be used. Much delay and confusion can be
avoided when correct numbers are specied
on parts order and correspondence.
4. Owners, order all parts through your local
dealer.
PARTS
5. Dealers must indicate how to ship.
6. Collect phone calls are not accepted.
7. Address parts orders as follows:
HINIKER COMPANY
58766 240th St.
P.O. BOX 3407
MANKATO, MN 56002-3407 USA
Phone [phone]
Fax [phone]
INSTRUCTIONS FOR RETURNING PARTS
FOR ADJUSTMENT
1. To assure prompt handling of claims, your
dealer or distributor should follow standard
claim procedure and forward claims within
thirty (30) days of any part failure or mal-
function believed to be a warranty claim,
to Hiniker Company claims department for
processing.
2. No returned part will be accepted unless they
are transportation prepaid and accompa-
nied by the packing list copy of the returned
goods authorization form, or the packing list
copy of the warranty claim form.
3. Parts returned should have a tag attached
with sender’s name and address clearly
printed.
Part Number 81004224 Rev. E November 2010 Parts Books/Hiniker/81004224RevE

Page 1
SERIES 6000 ROW CULTIVATOR
11/10
S
E
C
1
SECTION 1
RIGID SERIES
ROW CULTIVATOR
PAGE 2 RIGID TOOLBAR 4 ROW 30, 36/38 INCH
SERIES 6000 6 ROW 30
6 ROW 36/38 INCH RIGID
6 ROW 40 INCH
8 ROW 30 INCH RIGID
8 ROW 36/38 INCH RIGID
8 ROW 36/40 INCH RIGID
(3/8” WALL TOOLBAR)
10 ROW 30 INCH RIGID
(3/8” WALL TOOLBAR)

Page 2
SERIES 6000 ROW CULTIVATOR
11/10
RIGID TOOLBAR
4 ROW 36138, 6 ROW 30, 6 ROW 36/38/40
8 ROW 30, 8 ROW 36/38140
DWG. NO. 3011
S
E
C
1
REF.
NO.
PART
NUMBER DESCRIPTION QTY. REF. NO.
PART
NUMBER DESCRIPTION QTY.
1
2
3
4
5
6
7
8
9
875-001-038
810-002-234
810-002-235
810-002-236
810-002-237
810-002-238
81004338
952-001-006
951-001-009
810-002-080
810-002-079
810-002-085
810-001-920
810-001-284
U-Bolt 3/4
Toolbar (170”) (4/36-38)
Toolbar (198”) (6/30)
Toolbar (246”) (6/36-38)
Toolbar (258”) (8/30) 6/40)
Toolbar (322”) (8/36-38)
Toolbar (338”) 3/8 Wall (8/36-38-40) (10-30)
Lock Washer 3/4 Inch
Hex Nut 3/4-10
RH Lower Hitch Assy (Includes Items 1, 3 & 4)
(See Sect. 4 Pg. 7)
LH Lower Hitch Assy (Includes Items 1, 3 & 4)
(See Sect. 4 Pg. 7)
Upper Hitch Assy (Includes Items 1, 3 & 4)
(See Sect. 4 Pg. 7)
Parking Stand Assy (Includes Items 1, 3 & 4)
(See Sect. 4 Pg. 6)
End Plate
10
1
1
1
1
1
20
20
2
2
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
810-001-475
950-002-006
951-002-002
950-001-003
952-001-001
951-001-003
850-001-354
815-001-004
850-001-305
810-001-473
850-001-285
850-002-426
81004129
81004136
81004186
81004181
Block Removing Rod
Whiz Lock Bolt 5/16 x 3/4
Whiz Lock Nut 5/16-18
Hex Bolt 1/4-20 x 1
Lock Washer 1/4 Inch
Hex Nut 1/4-20
SMV Sign
SMV Mount Strap
Tape Reflector (Red)
Notice Decal
Tape Reflector (Yellow)
Caution Decal
6000 Decal
Hiniker Decal
Spacer Strap
Decal Bag (Includes Items 18, 19, 20, 21, 22
& 23)
1
8
8
2
2
2
1
1
2
1
2
1
2
2
2

Page 1
SERIES 6000 ROW CULTIVATOR
11/10
S
E
C
2
PAGE 2-3 FOLDING TOOLBAR
SERIAL NO. ENDING 100
8 ROW 30
PAGE 4-5 FOLDING TOOLBAR
SERIAL NO. ENDING 101 OR HIGHER
8 ROW 30
PAGE 6-7 FOLDING TOOLBAR
SERIAL NO. ENDING 100
8 ROW 36-38 12 ROW 30
PAGE 8-9 FOLDING TOOLBAR
SERIAL NO. ENDING 101 OR HIGHER
8 ROW 36-38-40
10 ROW 30 12 ROW 30
PAGE 10-11 FOLDING TOOLBAR
SERIAL NO. ENDING 100 OR HIGHER
12 ROW 36-38
12 ROW 40 16 ROW 30 18 ROW 28
SECTION 2
FOLDING SERIES
ROW CULTIVATOR

Page 2
SERIES 6000 ROW CULTIVATOR
11/10
FOLDING TOOLBAR ASSEMBLY
SERIAL NO. ENDING 100
8 ROW 30
DWG. NO. 2892
S
E
C
2

Page 3
SERIES 6000 ROW CULTIVATOR
11/10
REF.
NO.
PART
NUMBER DESCRIPTION QTY. REF. NO.
PART
NUMBER DESCRIPTION QTY.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
810-002-337
810-002-351
810-002-352
810-002-164
810-002-085
81002580
815-001-004
850-001-354
875-001-038
850-002-426
950-001-181
850-001-980
850-001-305
81004136
850-001-306
850-001-285
810-002-157
810-002-156
81002674
845-001-150
810-001-255
953-003-017
81002675
810-002-155
850-001-200
953-003-023
953-005-002
953-003-002
810-002-485
Center Frame Weldment
LH Wing Weldment
RH Wing Weldment
Stand Weldment
Upper Hitch Assembly (Includes Items 9, 36 &
37) (See Sec. 4 Pg. 7)
3 1/2 x 16 Dia. Cylinder SAE (See Sec. 3 Pg. 3)
SMV Mount Strap
SMV Sign
3/4 U-Bolt
Caution Decal
Hex Head Cap Screw 5/8-11 x 8 1/2 Gr. 5
Warning Decal
Tape Reflector (Red)
Hiniker Decal
Warning Decal
Tape Reflector (Yellow)
LH Link Weldment
RH Link Weldment
Tube
Spacer
Roller
Spring Pin 5/16 x 2
Link Pin
Hinge Pin
Hinge Pin
Spring Pin 5/16 x 3
Hair Pin Cotter .178 x 3 9/16
Spring Pin 1/2 x 2 1/2
Lower Hitch Pin
1
1
1
2
1
2
1
1
6
1
2
4
2
2
2
2
2
2
4
4
4
4
2
2
2
2
2
2
2
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
230-026-005
810-002-284
810-001-511
955-001-001
951-001-022
850-002-503
951-001-009
952-001-006
950-001-031
951-005-052
805-001-784
950-002-006
951-002-002
950-001-003
951-001-003
952-001-001
810-001-920
810-001-473
953-003-028
951-001-008
952-001-005
81004182
81004186
81004129
701-30004
81003138
953-003-008
Klik Pin
End Cover
Block Removing Road Short (8 Row 30 Fold)
Grease Fitting
Hex Nut 1-1/4
Eye Bolt 1-1/4
Hex Nut 3/4-10
Lock Washer 3/4 Inch
Hex Head Cap Screw 3/4-10 x 3 Gr. 5
Jam Nut 3/4-10
30° Bulkhead Plate
Whiz Lock Bolt 5/16 x 3/4
Whiz Lock Nut 5/16
Hex Head Cap Screw 1/4-20 x 1
Hex Nut 1/4-20
Lock Washer 1/4 Inch
Parking Stand Assembly (Includes Items 9, 36
& 37) (See Sec. 4 Pg. 6)
Notice Decal
Spring Pin 1/2 x 2 3/4
Hex Nut 5/8-11
Lock Washer 5/8
Decal Bag (Includes Items 10, 12, 13, 14, 15,
16, 47 & 52)
Spacer Straps
6000 Decal
Spring Pin 3/16 x 2 1/4
Roller
Spring Pin 5/16 x 2 1/4
2
2
1
2
4
2
12
12
4
4
1
1
8
2
2
2
2
1
2
10
10
2
2
2
4
4
S
E
C
2

Page 4
SERIES 6000 ROW CULTIVATOR
11/10
FOLDING TOOLBAR ASSEMBLY
SERIAL NO. ENDING 101 OR HIGHER
8 ROW 30
DWG. NO. 3006
S
E
C
2

Page 5
SERIES 6000 ROW CULTIVATOR
11/10
REF.
NO.
PART
NUMBER DESCRIPTION QTY. REF. NO.
PART
NUMBER DESCRIPTION QTY.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
810-001-284
810-001-475
81002580
952-001-007
81004234
81004235
81004236
81004406
953-003-002
81004351
81004482
81004481
81004436
81004437
81004296
81004297
81004298
81004300
81004301
953-003-009
81004400
81004394
953-003-030
952-001-005
950-001-185
950-002-006
950-003-009
951-001-005
951-001-008
955-001-001
951-002-002
81004251
81004287
End Plate
Block Removing Rod
Cylinder Assembly 3 1/2 x 16 (See Sec. 3 Pg. 3)
Lock Washer 3/8 Inch
Pin
Rubber Cushion
Stand Shim
Hinge Pin
Spring Pin 1/2 x 2 1/2
Bushing
Top Link Pin
Linch Pin
Roller
Pin
Stop
Shim
Lift Link
Lower Hitch Pin
Clinch Pln
Spring Pin 3/8 x 1 3/4
Center Toolbar Weldment 8/30
Wing Toolbar Weldment 8/30
Spring Pin 1/2 x 3
Lock Washer 5/8 Inch
Hex Head Cap Screw 5/8-11 x 2 1/4 Gr. 5
Hex Head Flanged Whiz Lock Bolt 5/16-18 x 3/4
Carriage Bolt 3/8-16 x 1 3/4 Gr. 2
Hex Nut 3/8-16
Hex Nut 5/8-11
Grease Fitting 1/8-27 NPT
Flat Whiz Lock Nut 5/16-18
Pivot Weldment
Weight Weldment
2
1
2
8
2
2
6
2
2
2
1
1
4
2
2
10
2
2
2
8
1
2
4
6
4
8
4
4
6
2
8
2
2
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
953-003-006
951-002-052
81004284
81003042
953-005-001
810-001-920
875-001-038
952-001-006
951-001-009
952-001-001
951-001-003
850-002-426
81004129
81004136
850-001-306
850-001-980
850-001-285
850-001-305
810-001-473
81004309
81004700
701-30022
950-001-108
81004697
81004695
850-001-354
815-001-004
805-001-784
805-001-332
950-001-003
Spring Pin 1/4 x 1 1/2
Jam Nut 3/4-10
Latch Weldment
Pin
Hair Pin Cotter .120 x 2 3/8
Parking Stand Assembly (Includes Items 40, 41,
42) (See Sec. 4 Pg. 6)
U-Bolt Plated
Lock Washer 3/4 Inch
Hex Nut 3/4-10
Lock Washer 1/4 Inch Med Split SAE
Hex Nut 1/4-20
Decal Caution
Decal 6000 Series
Decal Hiniker
Decal Lift Cylinder
Decal Warning
Tape-Yellow Reflector
Tape-Red Reflector
Decal Notice
Decal Bag (Includes Items 45, 46, 47, 48, 49,
50, 51 & 52)
Tube Weldment
Spring Pin 3/16 x 2
Hex Bolt 3/8-16 x 1 1/2
Lock Bar Weldment
Shim
SMV Sign
SMV Strap
30° Bulkhead Plate
U-Bolt 5/8
Hex Head Cap Screw 1/4-20 x 1 Gr. 2
2
2
2
2
2
2
4
8
8
2
2
1
2
2
2
4
2
2
1
1
2
2
4
2
A/R
1
1
1
1
2
S
E
C
2

Page 6
SERIES 6000 ROW CULTIVATOR
11/10
FOLDING TOOLBAR ASSEMBLY
SERIAL NO. ENDING 100
8 ROW/36-38, 12 ROW/30
DWG. NO. 2890
S
E
C
2

Page 7
SERIES 6000 ROW CULTIVATOR
11/10
REF.
NO.
PART
NUMBER DESCRIPTION QTY. REF. NO.
PART
NUMBER DESCRIPTION QTY.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
810-002-132
810-002.338
810-002-133
810-002-349
810-002-134
810-002-350
810-002-164
81004129
810-002-085
81004342
815-001-004
850-001-354
875-001-038
850-002-426
701-30004
850-001-980
850-001-305
81004136
850-001-306
850-001-285
810-002-157
810-002-156
810-001-473
950-001-087
810-001-255
953-003-017
81002603
810-002-155
850-001-200
953-003-023
953-005-002
953-003-002
Center Frame Weldment (12/30)
Center Frame Weldment (8/36-38)
LH Wing Weldment (12/30)
LH Wing Weldment (8/36-38)
RH Wing Weldment (12/30)
RH Wing Weldment (8/36-38)
Stand Weldment 12/30
Stand Weldment 8/36-38
Upper Hitch Assembly (Includes Items 9, 37 &
37) (See Sec. 4 Pg. 7)
4 x16 Diameter Cylinder SAE (See Sec. 3 Pg. 4)
SMV Mount Strap
SMV Sign
3/4 U-Bolt
Caution Decal
Spring Pin 3/16 x 2 1/4
Warning Decal
Tape Reflector (Red)
Hiniker Decal
Warning Decal
Tape Reflector (Yellow)
LH Link Weldment
RH Link Weldment
Notice Decal
Hex Head Cap Screw 5/8 x 1 1/2 (8 Row 36 Only)
Roller
Spring Pin 5/16 x 2
Link Pin
Hinge Pin
Hinge Pin
Spring Pin 5/16 x 3
Hair Pin Cotter .178 x 3 9/16
Spring Pin 1/2 x 2 1/2
1
1
1
1
1
1
2
2
1
2
1
1
6
1
4
4
2
2
2
2
2
2
1
8
4
4
2
2
2
2
2
2
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
810-002-485
230-026-005
810-001-284
810-001-475
955-001-001
951-001-022
850-002-503
951-001-009
952-001-006
950-001-031
951-005-052
810-001-920
950-002-006
951-002-002
950-001-003
951-001-003
952-001-001
805-001-332
952-001-005
951-001-008
81003138
953-003-008
953-003-028
81004186
81004129
81004182
950-001-181
805-001-784
845-001-150
81002674
810-002-371
Lower Hitch Pin
Klik Pin
End Cover
Block Removing Rod
Grease Fitting
Hex Nut 1 1/4
Eye Bolt 1 1/4
Hex Nut 3/4-10
Lock Washer 3/4 Inch
Hex Bolt 3/4-10 x 3
Jam Nut 3/4-10
Parking Stand Assembly (Includes Items 9, 36
& 37) (See Sec. 4 Pg. 6)
Hex Head Flanged Whiz Lock Bolt 5/16 x 3/4
Whiz Lock Nut 5/16
Hex Head Cap Screw 1/4-20 x 1
Hex Nut 1/4
Lock Washer 1/4 Inch
U-Bolt 5/8
Lock Washer 5/8 Inch
Hex Nut 5/8
Roller
Spring Pin 5/16 x 2 1/4
Spring Pin 1/2 x 2 3/4
Spacer Straps
6000 Decal
Decal Bag (Includes Items 10, 12, 13, 14, 15,
16, 19 & 53)
Hex Head Cap Screw 5/8-11 x 8 1/2 Gr. 5
30° Bulkhead Plate
Spacer
Tube
Spacer Plate (8 Row 36 Only)
2
2
2
1
2
4
2
12
12
4
4
2
B
8
2
2
2
4
8
8
4
4
2
2
2
1
2
1
4
4
4
S
E
C
2

Page 8
SERIES 6000 ROW CULTIVATOR
11/10
FOLDING TOOLBAR ASSEMBLY
SERIAL NO. ENDING 101 OR HIGHER
8 ROW 36-38-40,10 ROW 30, 12 ROW 30
DWG. NO. 3010
S
E
C
2

Page 9
SERIES 6000 ROW CULTIVATOR
11/10
REF.
NO.
PART
NUMBER DESCRIPTION QTY. REF. NO.
PART
NUMBER DESCRIPTION QTY.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
810-001-284
810-001-475
81004342
952-001-007
81004234
81004235
81004236
61004406
952-001-005
81004481
81004482
953-003-002
81004289
81004290
81004296
81004297
81004298
81004300
81004301
953-003-009
81004401
81004402
81004393
81004392
953-003-030
951-002-002
950-001-185
950-002-006
950-003-009
951-001-005
951-001-008
955-001-001
81004251
End Plate
Block Removing Rod
Cylinder Assembly 4 x 16 (Sec 3 Page 5)
Lock Washer 3/8 Inch Medium Split SAE
Pin
Rubber Cushion
Stand Shim
Hinge Pin
Lock Washer 5/8 Inch Medium Split SAE
Linch Pin
Top Link Pin
Spring Pin 1/2 x 2-1/2
Roller
Pin
Stop
Shim
Lift Link
Lower Hitch Pin
Clinch Pin
Spring Pin 3/8 x 1-3/4
Center Toolbar Weldment 8/36-38-40
Center Toolbar Weldment 12/30
Wing Toolbar Weldment 8/36-38-40
Wing Toolbar Weldment 12/30
Spring Pin 1/2 x 3
Flanged Whiz Lock Nut 5/16-18
Hex Head Cap Screw 5/18-11 x 2 1/4 Gr. 5
Hex Head Flanged Whiz Lock Bolt 5/16-18
Carriage Bolt 3/8-16 x 1-3/4 Gr. 2
Hex Nut 3/8-16
Hex Nut 5/8-11
Grease Fitting 1/8-27 NPT
Pivot Weldment
2
1
2
8
2
2
6
2
6
1
1
2
4
2
2
10
2
2
2
8
1
1
2
2
4
8
4
8
4
4
6
2
2
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
81004702
953-003-006
951-005-052
81004284
81003042
953-005-001
810-001-920
875-001-038
952-001-006
951-001-009
952-001-005
951-001-003
850-002-426
81004129
81004136
850-001-306
850-001-980
850-001-285
850-001-305
810-001-473
81004309
850-001-354
815-001-004
805-001-784
805-001-332
81004700
701-30022
950-001-108
81004697
81004695
950-001-003
Weight Weldment
Spring Pin 1/4 x 1-1/2
Jam Nut 3/4-10
Latch Weldment
Pin
Hair Pin Cotter .120 x 3 3/8
Parking Stand Assembly (Includes Items 39,
40, 41)
U-Bolt Plated
Lock Washer 3/4 Inch Medium Split SAE
Hex Nut 3/4-10
Lock Washer 1/4 Medium Split SAE
Hex Nut 1/4-20
Decal Caution
Decal 6000 Series
Decal Hiniker
Decal Lift Cylinder
Decal Warning
Tape-Yellow Reflector
Tape-Red Reflector
Decal-Notice
Decal Bag (Includes Items 44, 45, 46, 47, 48,
49, 50 & 51)
SMV Sign
SMV Strap
30° Bulkhead Plate
U-Bolt 5/8
Tube Weldment
Spring Pin 3/16 x 2
Hex Head Cap Screw 3/8-16 x 1 1/2
Lockbar Weldment
Shim
Hex Head Cap Screw 1/4-20 x 1 Gr. 2
2
2
2
2
2
2
2
2
2
2
2
2
1
2
2
2
4
2
2
1
1
1
1
1
1
2
2
4
2
A/R
2
S
E
C
2

Page 10
SERIES 6000 ROW CULTIVATOR
11/10
FOLDING TOOLBAR ASSEMBLY
SERIAL NO. ENDING 100 OR HIGHER
12 ROW 36/38 & 16 ROW 30, 18 ROW 28
DWG. NO. 3020
S
E
C
2

Page 11
SERIES 6000 ROW CULTIVATOR
11/10
REF.
NO.
PART
NUMBER DESCRIPTION QTY. REF. NO.
PART
NUMBER DESCRIPTION QTY.
1
2
3
4
5
6
7
8
9
1D
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
810-001-284
810-001-475
81002581
81004872
81003042
81004234
81004235
81004236
81004246
81004251
81004257
81004304
81004284
81004702
81004289
81004290
81004296
81004297
81004298
81004300
81004301
81004302
81004306
81004305
81004308
81004307
81004852
81004853
850-002-503
865-001-042
950-001-185
950-002-006
030-16071
951-001-005
951 001-008
951-001-022
951-002-002
951-005-052
952-001-005
End Plate
Block Removing Rod
Cylinder Assembly 5 x 16 (Sec 3 Page 6)
Cylinder Assembly 5 x 16 (Sec 3 Page 6)
Pin
Pin
Rubber Cushion
Stand Shim
Hinge Pin
Pivot Weldment
Strap Weldment (16 Row 30) (18 ROW 28)
Strap Weldment (12 Row 36/38)
Latch Weldment
Weight Weldment
Roller
Pin
Stop
Shim
Lift Link
Lower Hitch Pin
Clinch Pin
Pin
Center Toolbar Weldment 12/36-38
Center Toolbar Weldment 16/30 & 18/28
Wing Toolbar Weldment 12/36-38
Wing Toolbar Weldment 16/30
Left Wing Toolbar Weldment 18/28
Right Wing Toolbar Weldment 18/28
Eye Bolt 1 1/4-7
Control Arm Link Pin
Hex Head Cap Screw 5/8-11 x 2-1/4 Gr. 5
Hex Head Flanged Whiz Lock Bolt 5/16-18 x 3/4
Carriage Bolt 3/8-16 x 1 3/4 Gr. 5
Hex Nut 3/8-16
Hex Nut 5/8-11
Hex Nut 1 1/4-7
Hex Head Flanged Whiz Lock Nut 5/16-18
Jam Nut 3/4-10
Lock Washer 5/8 Inch
2
1
2
2
2
2
2
6
2
2
2
2
2
2
4
2
2
10
2
2
2
2
1
1
2
2
1
1
2
2
4
8
4
4
6
4
8
2
6
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
952-001-007
953-003-002
953-003-003
953-003-006
953-003-009
953-003-030
953-005-001
955-001-001
850-001-036
810-001-473
81004136
81004129
850-002-426
805-001-784
815-001-004
951-001-003
952-001-001
850-001-354
950-001-003
81004697
81003020
81004695
850-001-285
850-001-305
81004311
875-001-035
952-001-006
951-001-009
81004237
81004482
81004481
850 001-980
81004309
81004700
701-30022
950-001-108
Lock Washer 3/8 Inch
Spring Pin 1/2 x 2 1/2
Spring Pin 1/4 x 1 3/4
Spring Pin 1/4 x 1 1/2
Spring Pin 3/8 x 1 3/4
Spring Pin 1/2 x 3
Hair Pin Cotter .120 x 2 3/8
Grease Fitting 1/8-27 NPT
Warning Decal
Notice Decal
Hiniker Decal
6000 Decal
Caution Decal
30° Bulk Head Plate
SMV Mount Strap
Hex Nut 1/4-20
Lock Washer 1/4 Inch
SMV Sign
Hex Head Cap Screw 1/4-20 x 1
Lockbar Weldment
U-Bolt 5/8
Shim
Tape Yellow Reflective
Tape Red Reflective
Parking Stand Assembly (Sec 4 Page 6)
U-Bolt 3/4
Lock Washer 3/4 Inch
Hex Nut 3/4-10
Upper Hitch Assembly (Includes Items 61, 62
& 63)
Top Link Pin Cat III
Linch Pin
Decal Warning
Decal Bag (Includes Items 42, 43, 44, 45,46,
57, 58, 59 & 67)
Tube Weldment
Spring Pin 3/16 x 2
Hex Bolt 3/8-16 x 1 1/2
8
2
4
2
12
4
2
4
2
1
2
2
1
1
1
2
2
1
2
2
1
A/R
2
2
2
A/R
A/R
A/R
1
1
1
4
2
2
4
S
E
C
2

Page 1
SERIES 6000 ROW CULTIVATOR
11/10
SECTION 3
HYDRAULICS
PAGE 2 HYDRAULIC PLUMBING
170 DEGREE WING LIFT ALL FOLDING MODELS
WING LIFT CYLINDERS
PAGE 3 PRINCE 3.5 INCH DIA. X 16 INCH STROKE
PAGE 4 PRINCE 4.00 INCH DIA. X 16 INCH STROKE P/N AM-111SP
PAGE 5 PRINCE 4.00 INCH DIA. X 16 INCH STROKE P/N AR-264
PAGE 6 PRINCE 5.00 INCH DIA. X 16 INCH STROKE
LIFT ASSIST CYLINDERS
PAGE 7 TEXAS HYD. 3.00 INCH DIA. X 8 INCH STROKE
PAGE 8 PRINCE 3.00 INCH DIA. X 8 INCH STROKE
S
E
C
3

Page 2
SERIES 6000 ROW CULTIVATOR
11/10
*NOTE: TO HAVE POSITIVE LOCK ON TOOLBAR WING LOCK, AN OPTIONAL NEEDLE VALVE IS OFFERED NO. 81004701.
THIS WILL INSURE THE LIFT CYLINDER WILL NOT CLOSE, AND DISENGAGE WING LOCK.
HYDRAULIC PLUMBING 170 DEGREE WING LIFT
REF.
NO.
PART
NUMBER DESCRIPTION QTY. REF. NO.
PART
NUMBER DESCRIPTION QTY.
1
2
3
4
5
6
7
8
956-004-002
957-002-014
956-007-003
81002580
81004342
81004872
956-005-002
956-008-024
956-008-025
957-001-009
957-001-017
957-001-018
957-001-021
957-001-056
957-001-004
957-001-009
Reducer Bushing 1/2 Male NPT to 3/8 Female
NPT
3/8 Inch Hose Assembly 48 Inches
Bulkhead Tee 9/16 Male JIC To 9/16 Male JIC
To 9/15 Male JIC
3.50 Inch Diameter x 16 Inch Stroke Cylinder
8 Row 30
4.00 Inch Diameter x 16 Inch Stroke Cylinder 8
Row 36-38-40, 10 Row 30, 12 Row 30
5.00 Inch Diameter x 16 Inch Stroke Cylinder
10 Row 36-38, 12 Row 36-38, 16 Row 30, 18
Row 28
90° Elbow 9/16 Female JIC to 9/16 Male JIC
Restrictor Fitting 3/4 Male SAE O-Ring to 9/16
Male JIC 3.50 & 4.00 Cylinder
Restrictor Fitting 7/8 Male SAE O-Ring to 9/16
Male JIC 5.00 Cylinder
3/8 Inch Hose Assembly 50 Inch 8 Row 30
3/8 Inch Hose Assembly 72 Inch 8 Row 36-
38-40
3/8 Inch Hose Assembly 79 Inch 10 Row 30,
12 Row 30
3/8 Inch Hose Assembly 102 Inch 10 Row 36-
38, 12 Row 36-38
3/8 Inch Hose Assembly 108 Inch 16 Row 30
& 18 Row 28
3/8 Inch Hose Assembly 29 inch 8 Row 30
3/8 Inch Hose Assembly 50 inch 8 Row 36,
38,40
2
2
2
2
2
2
4
4
4
1
1
1
1
1
1
1
8
9
10
11
12
957-001-014
957-001-057
957-001-019
957-001-006
957-001-015
957-001-018
957-001-021
957-001-056
957-001-014
957-001-057
957-001-020
957-001-054
957-001-023
81004701
956-003-022
3/8 Inch Hose Assembly 60 Inch 10 Row 30,
12 Row 30
3/8 Inch Hose Assembly 86 Inch 10 Row 36,
38, 12 Row 36, 38
3/8 inch Hose Assembly 92 inch 16 Row 30
18 Row 28
3/8 Inch Hose Assembly 41 Inch 8 Row 30
& Row 28
3/8 inch Hose Assembly 68 Inch 8 Row 36,
38,40
3/8 Inch Hose Assembly 79 Inch 10 Row 30,
12 Row 30
3/8 Inch Hose Assembly 102 Inch 10 Row
36,38, 12 Row 36, 38
3/8 Inch Hose Assembly 108 inch 16 Row
30 & 18 Row 28
3/8 Inch Hose Assembly 60 Inch 8 Row 30
3/8 Inch Hose Assembly 86 Inch 8 Row 36,
38,40
3/8 Inch Hose Assembly 96 Inch 10 Row 30,
12 Row 30
3/8 Inch Hose Assembly 120 Inch 10 Row
36, 38, 12 Row 36, 38
3/8 Inch Hose Assembly 126 Inch 16 Row
30 &18 Row 28
3/8 Needle Valve (Optional)
Straight Adapter 3/8 MNPT to 1/2 MNPT
(Optional)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
DWG. NO. 3215
S
E
C
3

Page 3
SERIES 6000 ROW CULTIVATOR
11/10
PRINCE 3.5 INCH DIAMETER X 16 INCH STROKE
CYLINDER 3/4 O-RING PORTS
S
E
C
3
REF.
NO.
PART
NUMBER DESCRIPTION QTY. REF. NO.
PART
NUMBER DESCRIPTION QTY.
1
2
3
4
5
6
7
8
9
10
11
81002605
855-001-404
850-001-794
855-001-413
856-001-252
81002604
855-001-387
856-001-254
850-001-796
*
*
Piston Rod
#8 SAE Plug
Tube
Butt
Gland
Piston
Lock Nut 7/8-14 Uni-Torque
Hex Nut
Tie Rod
O-Ring
O-Ring
1
1
1
1
1
1
1
4
4
2
1
12
13
14
15
16
17
18
19
*
*
*
*
*
850-001-804
840-001-206
856-001-239
856-001-258
81002580
Backup Washer
O-Ring
U-Cup
Backup Washer
Wiper
Clevis Pin
Hair Pin Clip
Clevis Assembly
Seal Kit Includes Items 10, 11, 12, 13, 14, 15 & 16
Complete 3 1/2 x 16 Cylinder Assembly
*NOTE: Items marked “*” are available in seal kit.
2
1
1
2
1
1
2
1
DWG. NO. 2301
Cylinder Identification Hiniker P/N 81002580
Prince Pin SAE-9316A-5P

Page 4
SERIES 6000 ROW CULTIVATOR
11/10
PRINCE 4 INCH DIAMETER X 16 INCH STROKE
CYLINDER 3/4 O-RING PORTS
P/N AM-111SP
REF.
NO.
PART
NUMBER DESCRIPTION QTY. REF. NO.
PART
NUMBER DESCRIPTION QTY.
1
2
3
4
5
6
7
8
9
10
11
12
861-001-222
855-001-404
861-001-223
855-001-426
855-001-425
850-001-809
951-005-034
855-001-424
81002578
*
*
*
Piston Rod
#8 SAE Plug
Tube
Butt
Gland
Piston
Lock Nut 1 1/4-12 UNF Uni-Torque
Hex Nut
Tie Rod
O-Ring
O-Ring
Back Up Washer
1
1
1
1
1
1
1
4
4
2
1
2
13
14
15
16
17
18
19
*
*
*
*
850-001-818
840-001-206
855-001-402
855-001-429
O-Ring
U-Cup
Back Up Washer
Wiper
Clevis Pin
Hair Pin Clip
Clevis Assembly
Seal Kit (Includes Items 10, 11, 12, 13, 14, 15 & 16)
Complete 4 x 16 Cylinder Assembly
Order 81004342
* NOTE: Items marked “*” are available in seal kit.
1
1
2
1
1
2
1
DWG. NO. 2298
Prince P/N AM-111SP
S
E
C
3