Hipstreet HS-IPADCASE2-3IN1 User manual

USER’S MANUAL
HS-IPADCASE2-3IN1
BLUETOOTH KEYBOARD CASE

BT Keyboard Case
2
Set up Instructions for the Ipad Keyboard Case
Step I Setting up the iPad
• Insert the iPad into the Case.
• Secure the bottom strap to prevent the Ipad from slipping out of the case.

BT Keyboard Case
3
• Use the built in kick stand feature to position the iPad comfortably.
Step II How to connect the luetooth Keyboard to the iPad
• Turn the luetooth keyboard on by using the power button on the right side of
the keyboard
• Then press the bluetooth button to put the Keyboard into “Pairing Mode”.
• Turn the iPad ON, Unlock the iPad, and tap “Settings”.

BT Keyboard Case
4
• Tap “ luetooth” and then switch to ON (If not on already).
• The iPad will show a list of available and connected bluetooth devices.
• Look for Bluetooth Keyboard in the list and tap it. (It should say Not Paired if
the devices were never paired.)

BT Keyboard Case
5
• Click on the “ luetooth Keyboard”.
• A new window should pop up on the iPad screen with the Passkey. The
passkey is needed to connect the luetooth keyboard to the iPad.
• Enter the passkey on the luetooth keyboard followed by the return or enter
key
• The luetooth Keyboard is now successfully connected to the iPad and is ready
to use.

BT Keyboard Case
6
Using the luetooth keyboard with the iPad after it has been paired
• To connect the iPad to the bluetooth keyboard, turn the power switch ON and
then press the bluetooth button on the luetooth keyboard. It is now ready to
use
• When the power is turned ON, the light on the right top of the keyboard will
flash blue ONCE.
• When you activate the luetooth radio, the light will blink once every second.
The device is now in “Pairing Mode”.
• When the device is connected, the blue light will blink 2 times every 10 seconds.
• When charging, a GREEN light will come on and stay on until charging is
complete. To fully charge, please switch the keyboard OFF.
About The luetooth Keyboard:
• This Keyboard is customized just for the iPad; therefore, some keys are unique

BT Keyboard Case
7
iPad functions (see the image below for a list of those functions).
*The built-in lithium battery has an operation duration of 120 hours, in standby mode it will last up to 2 months
when fully char ed. Char e the device by connectin the USB cable to an appropriate power supply (e. . USB
Port on laptop or PC).
Pairin only needs to be done ONCE unless you delete the device from the Bluetooth Devices list.
Repeat Step II to reconnect device.
luetooth Keyboard Technical Specifications:
luetooth Specification：
：：
： Version 2.0
Operation Current：
：：
： <5mA
Operation Voltage：
：：
： 4.2V

BT Keyboard Case
8
Charging Voltage: 110-240V
attery Type: Lithium Battery
Charging period：
：：
： 4hours (For the irst time, please charge or 12 hours)
Standby Time: 45 days
Weight: 478g
Troubleshooting:
If you are unable to connect the keyboard to your Ipad, please try the following:
• Check if the battery is low. If the keys are responding slowly or not at all, try
charging the battery.
• Check the power switch, make sure it is on. When it is on, the power light on
the top right of the keyboard will flash lue.
• Power OFF and ON and delete device from luetooth devices list and
reconnect Keyboard to iPad.
• Verify that the correct passkey is being entered before pressing Enter on the
Keyboard.