Basalte eve Air User manual

265
mm/10.43”
163
mm/6.42”
Air
table
base
1
I dentific ation of the p arts (product number: 638- xx, 639- xx)
a. base plate
b. aluminium tube (portrait version or landscape version)
c.front plate
d. 6 x Phillips M3x10screws (formounting the table base)
e. 4 x Phillips M6x8screws (formounting the Eve frame on the
table base)
2
Mounting the table base
Mount the baseplate on the tube using four Phillips M3 screws
asshown in drawing 2.
3
Mountthefront plate with two Phillips M3screws, as shown in
drawing 3. (always use the horizontal holes)
4
Standard USBcable (not included)
T ak e the standardlightning USB cable,supplied with the iPad
and pullit through the tube following the cablenotch as shown
in
drawing 4.
D imensions
P ortrait version:
265 mm/10.43” x 173 mm/6.81” x 173 mm/6.81”
Landscape version:
163 mm/6.42” x 173 mm/6.81” x 173 mm/6.81”
173 mm/6.81”
173 mm/6.81”
5
Installingthe Eve Air frame (not included )
Scr e w (with the four Phillips M6 screws) the Eve frame onto the
front plate, taking into account the position of the frame (2).
Ensure the screws are positioned correctly, so they cannot
damagethe iPad.
6
Mountingthe iPad
1. Plug the power connector into the iPad.
Portrait version
Made inBelgium
Landscape version
2. Place the iPad sideways in the small lip according t o
the drawing (6).
3. Gently push the iPad in the frame so thatit isheld by
themagnets.
4. Mount the Eve cover but ensure that the cover is not
squeezing the power cable.
Basalte isa registered trademark of Basalte bvba.
Eve isa registered trademark of Basalte bvba.
Eve, Eve Air, Eve mini and Eve touch are registered designs of
Basalte bvba.
iPad, iPad Air,iPad mini, iPad mini Retinaand iPod touch are
registeredtrademarks of Apple Inc.
PuckPower supply (not included -product number: 610-01)
Inst all the puck in the wall boxfollowing the instructions of the
puck manual. Connect the iPad to the puck, usingthe Lightning
cable supplied with the iPad.
7
Removingthe iPad
1. Remove the Eve c over .
2. Placeone finger behind the iPad and another one on
the iPad asshown in the drawing (7).
3. Gently pull the iPad out of the frame making sure it
cannot fall.
4. Remove the power c onnector .
Basalte bvba
Hundelgemsesteenweg 1a
9820 Merelbeke
Belgium
tel [phone]
fax [phone]
inf o@b asalt e.be
www .basalt e.be
v1.0 © 2014 basalte
ACHTUNG: Die Basalte Eve Air Tablet Halterung ist nicht im Lieferumfang enthalten. Das Cover muss zusätzlich zum Standfuß bestellt werden!

1 a. base plate b.tube c. front plate 2 3
fr ont
front
landscape
version
b ack
portrait
(638- xx)
landscape
(639- xx)
back
d.
6 x Phillips screws e. 4 x Phillips screws
x 6 x 4
4 5 6 7
ACHTUNG: Die Basalte Eve Air Tablet Halterung ist nicht im Lieferumfang enthalten. Das Cover muss zusätzlich zum Standfuß bestellt werden!