Hitachi L19VG07U User manual

INSTRUCTION MANUAL
19’’ Colour TV
L19VG07U
Important - Please read these instructions fully before installing or operating and keep for future
reference.
These instructions contain important information which will help you get the best from your
television and ensure safe and correct installation and operation.
For any help concerning set up and use of your TV please call the
Customer Helpline: 0845 604 0105
Lines open: 9am - 8pm Monday to Saturday and 10am - 4pm Sunday
529/8109

www.hitachidigitalmedia.com
50188940

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
1
Contents
Introduction............................................................. 2
Intended Use .......................................................... 2
Preparation............................................................. 2
Symbols in this manual........................................... 2
Safety Precautions ................................................. 3
Power source...................................................... 3
Power cord and plug........................................... 3
nformation for Users
in European Union Countries.............................. 4
Connection to a Television Distribution
System (Cable TV etc.) from Tuner .................... 4
Taking out of service and storing............................ 5
Features ................................................................. 7
Package Contents .................................................. 7
Environmental Information ..................................... 8
Repair Information.................................................. 8
Remote Control Buttons ......................................... 9
LCD TV and Operating Buttons............................ 10
Viewing the Back side Connections ..................... 10
Viewing the Connections - Side Connectors .........11
Power Connection ................................................ 12
Aerial Connection ............................................. 12
Using Digital Multimedia Connectors.................... 12
USB Memory Connection ................................. 12
Connecting the LCD TV to a PC........................... 12
Using Side AV Connectors ................................... 12
Connecting to a DVD Player via HDMI................. 13
Connecting to a DVD Player via Component
Sockets (YPbPr) or Scart Cable........................... 13
Remote Control Handset...................................... 14
Inserting Batteries............................................. 14
Switching On/Off................................................... 14
To Switch the TV On......................................... 14
To Switch the TV Off ......................................... 14
Input Selection...................................................... 14
Basic Operations .................................................. 14
Operation with the Buttons on the TV............... 14
Operation with the Remote Control .................. 15
First Time Installation............................................ 15
Viewing Electronic Programme Guide (EPG)....... 16
Installation ............................................................ 17
Automatic Channel Scan
(Retune) Menu Operation................................. 17
Manual Tuning ..................................................... 17
Digital Manual Search....................................... 17
Analogue Manual Search ................................. 17
Analogue Fine Tune.......................................... 17
Clear Service List (*)......................................... 18
Managing Stations: Channel List.......................... 18
Operating the Channel List............................... 18
Moving a Channel............................................. 18
Deleting a Channel ........................................... 18
Renaming a Channel........................................ 18
Locking a Channel............................................ 18
Managing Stations: Favourites............................. 19
Button Functions............................................... 19
Managing Stations: Sorting Channel List ............. 19
On-Screen Information ......................................... 19
Media Playback Using Media Browser................. 19
Viewing Photos via USB................................... 20
Media Browser Settings.................................... 21
Changing Image Size: Picture Formats................ 21
Configuring Picture Settings................................. 22
Configuring Sound Settings.................................. 23
Operating Sound Settings Menu Items............. 23
Sound Settings Menu Items.............................. 23
Configuring Your TV’s Settings............................. 24
Operating Settings Menu Items ........................ 24
Settings Menu Items......................................... 24
Using a Conditional Access Module ..................... 24
Viewing Conditional Access Menu (*)............... 24
Configuring Language Preferences...................... 25
Language Settings............................................ 25
Parental Control.................................................... 26
Parental Settings Menu Operation ................... 26
Timers................................................................... 26
Configuring Date/Time Settings............................ 27
Configuring Source Settings................................. 27
Configuring Other Settings ................................... 27
Operation.......................................................... 27
Other Features ..................................................... 28
Teletext ................................................................. 28
Digital Teletext (** for UK only) ......................... 29
Tips ....................................................................... 29
Appendix A: PC Input Typical Display Modes....... 30
Appendix B: AV and HDMI Signal
Compatibility (Input Signal Types) ........................ 30
Appendix C: Supported DVI Resolutions.............. 31
Appendix D: Supported
File Formats for USB Mode.................................. 31
Appendix E: Pin Specifications............................. 32
SCART connector pin specifications ................ 32
HDMI connector pin specifi
cations ................... 32
Signal Input....................................................... 32
Appendix F: Software Upgrade ............................ 33
Specifications ....................................................... 34
Trouble shooting................................................... 35
Definitions of Important Terms.............................. 36
DVB-T functionality information ............................ 37
Product Guarantee ............................................... 38

2For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Introduction
Read the corresponding instructions of this handbook
prior to the first usage of the device, even when the
usage of electronic devices is familiar to you. Notice
especially the chapter SAFETY PRECAUTIONS.
Carefully keep the handbook as future reference.
When selling the device or giving it away, absolutely
give these direction for use.
Thank you for choosing this product. This Instruction
Book will guide you for the proper operation
of your TV. Before operating the TV, please
read this Instruction Book thoroughly. Keep
this Instruction Book in a safe place for future
references.
Intended Use
This device is intended to receive and display TV
programs. The different connection options make
an additional expansion of the reception and display
sources possible (various external devices). This
device is only suitable for the operation in dry interiors.
This appliance is intended solely for private domestic
use and may not be used for industrial and commercial
purposes. We exclude liability in principle, if the device
is not used as intended, or unauthorized modifications
have been made. To operate your LCD TV in extreme
ambient conditions may cause the damage of the
device.
Preparation
For ventilation, leave a free space of at least 10 cm
all around the set. To prevent any fault and unsafe
situations, please do not place any objects on top of
the set and do not block the ventilation openings. Use
this device in moderate climates.
10 cm
10 cm
10 cm
Symbols in this manual
The following symbols are used in the manual as a
marker for restrictions and precautions and safety
instructions. Please note such information for security
reasons.
WARNING
If you do not pay attention to such a marked warning, it
can cause serious injury or death or property damage.
Please note these warnings strictly, in order to ensure
a safe operation.
IMPORTANT
Warnings on the appliance and restrictions are
displayed like this. Please read this information
strictly in order to operate the system correctly and
avoid damage.
NOTE
Information about the operation and additional
explanations are marked like this. To be aware of
such information is recommended to ensure that the
functions can be used optimally.

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
3
Safety Precautions
Please read the following recommended safety
precautions carefully for your safety.
SOME DOS AND DON’TS ON THE SAFE USE OF
EQUIPMENT
This equipment has been designed and manufactured
to meet international safety standards but, like any
electrical equipment, care must be taken if you are to
obtain the best results and safety is to be assured.
**************
DO read the operating instructions before you attempt
to use the equipment.
DO ensure that all electrical connections (including
the mains plug, extension leads and inter-connections
between the pieces of equipment) are properly
made and in accordance with the manufacturer’s
instructions. Switch off and withdraw the mains plug
before making or changing connections.
DO consult your dealer if you are ever in doubt
about the installation, operation or safety of your
equipment.
DO be careful with glass panels or doors on
equipment.
DO route the mains lead so that it is not likely to be
walked on, crushed, chafed, or subjected to excessive
wear and tear or heat.
**************
DON’T remove any fixed cover as this may expose
dangerous voltages.
DON’T obstruct the ventilation openings of the
equipment with items such as newspapers, tablecloths,
curtains, etc. Overheating will cause damage and
shorten the life of the equipment.
DON’T allow electrical equipment to be exposed to
dripping or splashing, or objects filled with liquids, such
as vases, to be placed on the equipment.
DON’T place hot objects or naked flame sources
such as lighted candles or nightlights on, or close to
equipment. High temperatures can melt plastic and
lead to fires.
DON’T use makeshift stands and NEVER fix legs
with wood screws - to ensure complete safety always
fit the manufacturer’s approved stand or legs with the
fixings provided according to the instructions.
DON’T use equipment such as personal stereos or
radios so that you are distracted from the requirements
of traffic safety. It is illegal to watch television whilst
driving.
DON’T listen to headphones at high volume, as such
use can permanently damage your hearing.
DON’T leave equipment switched on when it is
unattended unless it is specifically stated that it is
designed for unattended operation or has a stand-by
mode. Switch off using the switch on the equipment
and make sure that your family know how to do this.
Special arrangements may need to be made for infirm
or handicapped people.
DON’T continue to operate the equipment if you are in
any doubt about it working normally, or if it is damaged
in any way - switch off, withdraw the mains plug and
consult your dealer.
ABOVE ALL
--- NEVER let anyone especially children
push anything into holes, slots or any other
opening in the case - this could result in a
fatal electrical shock;
--- NEVER guess or take chances with
electrical equipment of any kind
--- it is better to be safe than sorry!
*************.
Power source
The TV set should be operated only from a 220-240
V AC, 50 Hz outlet. Ensure that you select the correct
voltage setting for your convenience.
WARNING: Do not leave your TV in standby or
operating mode when you leave your house.
Power cord and plug
Do not place the set, a piece of furniture, etc. on the
power cord (mains lead) or pinch the cord. Handle the
power cord by the plug. Do not unplug the appliance
by pulling from the power cord and never touch the
power cord with wet hands as this could cause a short
circuit or electric shock. Never make a knot in the cord
or tie it with other cords. The power cords should be
placed in such a way that they are not likely to be
stepped on. A damaged power cord can cause fire or
give you an electric shock. When it is damaged and
needs to be replaced, it should be done by qualified
personnel.
This TV receiver is supplied with a moulded mains
plug. The mains plug must not be cut off, as it may
contain a special radio interference filter, the removal
of which could lead to impaired performance. If you
wish to extend the lead, obtain an appropriate safety
approved extension lead or consult your dealer.

4For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Observe the manufacturers instructions when
connecting extension leads to the set. Check the fuse
rating on the new plug; this should be fitted with a 5
Amp fuse which conforms to either ASTA or BSI
(BS1362) approvals, these are easily identifiable by
either the ASA or symbols. If you are in any doubt
about the installation of an extension lead, please
consult a competent electrician.
Moisture and Water
Do not use this device in a humid and
damp place (avoid the bathroom, the
sink in the kitchen, and near the washing
machine). Do not expose this device to
rain or water, as this may be dangerous
and do not place objects filled with
liquids, such as flower vases, on top.
Avoid from dripping or splashing.
If any solid object or liquid falls into the cabinet, unplug
the TV and have it checked by qualified personnel
before operating it any further.
Cleaning
Before cleaning, unplug the TV set
from the wall outlet. Do not use liquid
or aerosol cleaners. Use soft and dry
cloth.
Ventilation
The slots and openings on the TV set are intended for
ventilation and to ensure reliable operation. To prevent
overheating, these openings must not be blocked or
covered in anyway.
Heat sources and Flames
The set should not be placed near to
open flames and sources of intense heat
such as an electric heater. Ensure that
no open flame sources, such as lighted
candles, are placed on top of the TV. Batteries should
not be exposed to excessive heat such as sunshine,
fire or the like.
Lightning
Before a storm or lightning, or when
going on holiday, disconnect the power
and aerial lead from the wall sockets.
Replacement Parts
When replacement parts are required, make sure that
the service technician has used replacement parts,
which are specified by the manufacturer or have the
same specifications as the original one. Unauthorized
substitutions may result in fire, electrical shock or
other hazards.
Servicing
Please refer all servicing to qualified
personnel. Do not remove the cover
yourself as this may result in an electric
shock.
Information for Users in European Union
Countries
Waste Disposal
Instructions for waste disposal
Packaging and packaging aids are recyclable and•
should principally be recycled. Packaging materials,
such as foil bag, must be kept away from children.
Batteries, including those which are heavy metal-
free, should not be disposed of with household
waste. Please dispose of used batteries in an
environmentally friendly manner. Find out about the
legal regulations which apply in your area.
Don’t try to recharge batteries. Danger of explosion.•
Replace batteries only with the same or equivalent
type.
The mark on the side is in
compliance with the Waste Electrical
and Electronic Equipment Directive
2002/96/EC (WEEE). The mark
indicates the requirement NOT to
dispose the equipment including
any spent or discarded batteries
as unsorted municipal waste, but
use the return and collection systems available. If the
batteries or accumulators included with this equipment
display the chemical symbol Hg, Cd, or Pb, then it
means that the battery has a heavy metal content of
more than 0.0005% Mercury, or more than 0.002%
Cadmium or more than, 0.004% Lead.
Disconnecting the Device
The mains plug is used to disconnect TV set from
the mains and therefore it must remain readily
operable.
Headphone Volume
Excessive sound pressure from
earphones and headphones can
cause hearing loss.
Installation
To prevent injury, this device must be securely
attached to the wall in accordance with the installation
instructions when mounted to the wall (if the option
is available).
LCD Screen
The LCD panel is a very high technology product with
about a million thin film transistors, giving you fine
picture details. Occasionally, a few non-active pixels
may appear on the screen as a fixed blue, green or
red point. Please note that this does not affect the
performance of your product.

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
5
Connection to a Television Distribution
System (Cable TV etc.) from Tuner
Device connected to the protective earthing of the
building installation through the mains connection or
through other apparatus with a connection to protective
earthing-and to a television distribution system using
coaxial cable, may in some circumstances create a
fire hazard.
Connection to a cable distribution system has
therefore to be provided through a device providing
electrical isolation below a certain frequency range
(galvanic isolator, see EN 60728-11).
The Standby / On button doesn´t separate this•
device completely from mains. Moreover the device
consumes power in the standby operation. In order
to separate the device completely from mains, the
mains plug has to be pulled from the mains socket.
Because of that the device should be set up in a
way, that an unobstructed access to mains socket
is guaranteed, so that in case of emergency the
mains plug can be pulled immediately. To exclude
the danger of fire, the power cord should principally
be separated from the mains socket prior to a longer
period of non-usage, i.e. during vacations.
Electrical device not in the hands of children
WARNING: Never let children use electrical
device unsupervised.Children can´t always recognize
properly the possible dangers. Batteries / accumulators
can be life threatening when swallowed. Store
batteries out of reach of small children. In case of
swallowing a battery medical aid has to be sought
immediately. Also keep the packaging foils away from
children. There is danger of suffocation.
Safety Instructions for the Operation of the
Appliance
If fixed images are displayed for a period of more than
2 hours continuously, it may result in the outline of the
images that were displayed for too long to remaining
visible on the screen, i.e. permanent ‘afterimages’
remain on the screen.
The same applies, if for a period of more than 2
hours
• an unchanged background
• logos, video games, computer pictures, Teletext
• a non screen filling format (e.g. a 4:3-format),
is displayed.
NOTE: This appliance is not built for the long-
term rendering or replay of static images, including
Logos, video games, computer pictures, Teletext and
non screen filling formats.
Through rendering or replay of fixed images, Logos, video
games, computer pictures, Teletext and non screen filling
formats, the created permanent ‘afterimages’ cannot be
undone. They do not represent an operating error and
are not covered by the manufacturers warranty.
Taking out of service and storing
Unplug the TV from the mains and pack the TV in
an appropriate cardboard box. Remove the batteries
from the remote control and pack the remote control
with the TV set.
NOTE: The TV set should be stored in a dry and
dust-free room.

6For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
• Simple help and advice on setting up your digital
equipment (image).
• Guidance on connecting other devices to your
television such as a DVD player, Sky, home cinema
system or a games console.
• Order spare parts, including that lost remote control.
• Any other technical issues you may need assistance
with.
Technical experts are available 7 days a week
Call us today: 0845 604 0105
Local call rates applies*
Lines open 9am-8pm Monday to Saturday and 10am-4pm Sunday.
*Calls to Argos enquiry lines may attract a charge and set up fee from residential
lines depending on your call plan/tariff. Mobile and other providers costs may
vary see www.bt.com/pricing for details.
For Security and training purposes, telephone calls to and from customer service
centres maybe recorded and monitored. Calls from Republic of Ireland will attract
international call charges.

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
7
Features
Remote controlled colour LCD TV.•
Fully integrated Terrestrial digital TV (DVB-T -•
MPEG2)
HDMI connectors for digital video and audio.•
This connection is also designed to accept high
definition signals.
USB input.•
1000 programmes (analogue+digital).•
OSD menu system.•
Integrated tuner MPEG 2 compatible.•
Scart socket for external devices (such as video,•
video games, audio set, etc.).
Stereo sound system. (German+Nicam).•
Teletext, fastext, TOP text.•
Headphone connection.•
Automatic programming system.•
Forward or backward manual tuning.•
Sleep timer / Child lock.•
Automatic sound mute when no transmission.•
NTSC playback.•
AVL (Automatic Volume Limiting).•
Auto power down.•
PLL (Frequency Search).•
PC input.•
Plug&Play for Windows 98, ME, 2000, XP, Vista,•
Windos 7.
Game Mode.•
Package Contents
LCD TV
SLEEP
SCREEN LANG. SUBTITLE
ABC DEF GHI
JKL MNO PQR
STU VWX YZ
MRETURN
INFO
FAV 0
123
456
789
OK
SOURCE PRESETS
EPG
RC 1825
Remote Control
Batteries: 2 X AAA
Quick Guide
Instruction Book
1 X Video & Audio
Connection Cable
Digital Tuning Guide
NOTE: You should check the accessories
after purchasing. Make sure that each accessory is
included.

8For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Environmental Information
• This television is designed to consume less energy to save environment.
You not only help to save the environment but also you can save money by reducing electricity bills thanks to the
energy efficiency feauture of this TV. To reduce energy consumption, you should take the following steps:
• You can use Power Save Mode setting, located in the Feature menu. If you set Power Save Mode as On,
the TV will switch to energy-saving mode and luminance level of TV set will be decreased to optimum level.
Note that some picture settings will be unavailable to be changed when the TV is in Power Save Mode.
• When the TV is not in use, please switch off or disconnect the TV from the mains wall socket. This will also
reduce energy consumption.
• Disconnect power when going away for longer time.
• Please help us to save environment by following these steps.
Repair Information
WARNING: Please refer all servicing to qualified personnel. Only qualified personnel must repair the TV.
Please contact your local dealer, where you have purchased this TV for further information.

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
9
Remote Control Buttons
SLEEP
SCREEN LANG. SUBTITLE
ABC DEF GHI
JKL MNO PQR
STU VWX YZ
MRETURN
INFO
FAV 0
123
456
789
OK
SOURCE PRESETS
EPG
RC 1825
Standby1.
Yellow button2.
Blue button3.
Return / Exit menu / Index Page (in TXT mode)4.
Navigation buttons5.
OK / Channel list6.
Picture mode selection7.
EPG (Programme Guide)8.
Programme Up / Down9.
Numeric buttons10.
Previous programme11.
Subtitle on/off12.
Sleep timer13.
Teletext / Mix14.
No function15.
Green button16.
Red button17.
Menu On/Off18.
AV / Source19.
Info20.
Volume Up/Down21.
Mute22.
Favourite mode23.
Mono-Stereo / Dual I-II24.
Image Size25.
Media Browser26.
No function27.

10 For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
LCD TV and Operating Buttons
FRONT and REAR VIEW Control buttons VIEW Control Buttons
P\V-AV
1. Standby Off/On button
2. TV/AV button
3. Programme Up/Down buttons-
Volume Up/Down buttons
NOTE: You can use +/-
buttons to change volume. If you
want to change channels, press
P/V/AV button once and then use
+/- buttons. If you hold the P/V/
AV button about a few seconds,
source OSD will be displayed.
Main menu OSD cannot be
displayed via control buttons.
Viewing the Back side Connections
HDMI 1
SPDIF
Coax.OUT
HDMI 1: HDMI Input1.
HDMI Inputs are for connecting a device that has an HDMI socket. Your LCD TV is capable of displaying
High Definition pictures from devices such as a High Definition Satellite Receiver or Blu-ray Player. These
devices must be connected via the HDMI sockets or Component Socket. These sockets can accept
either 720p or 1080p signals. No sound connection is needed for an HDMI to HDMI connection.
RF Input2. connects to an aerial antenna system.
Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device
to the television with an appropriate antenna cable, as shown in the illustration in the following pages.

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
11
SCART3. input or output for external devices. Connect the SCART cable between SCART socket on TV and
SCART socket on your external device (such as a decoder, a VCR or a DVD player).
NOTE: If an external device is connected via the SCART socket, the TV will automatically switch to AV
mode.
NOTE:S-VHS signal is supported via the scart socket.
PC Input4. is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.
NOTE: You can use YPbPr to VGA cable(not supplied) to enable YPbPr signal via PC input.
WARNING: You cannot use PC and YPbPr at the same time.
S/PDIF Coaxial Out5. outputs digital audio signals of the currently watched source. Use an SPDIF
coaxial cable to trasfer audio signals to a device that has S/PDIF input.
Viewing the Connections - Side Connectors
CI Slot is used for inserting a CI card. A CI card allows you to view all the channels1.
that you subscribe to. For more information, see “Conditional Access” section.
Side USB input.2.
TV control buttons.3.
Side audio-video connection4. input is used for connecting video and audio
signals of external devices. To make a video connection, you must use the
supplied AV connection cable for enabling connection. First, plug singular jack of
the cable to the TV’s Side AV socket. Afterwards, insert your video cable’s (not
supplied) connector into the YELLOW input (located on the plural side) of the
supplied AV connection cable. Colours of the connected jacks should match.
To enable audio connection, you must use RED and WHITE inputs of the side AV
connection cable. Afterwards, insert your device’s audio cable’s connectors into
the RED and WHITE jack of the supplied side AV connection cable. Colours of
the connected jacks should match.
NOTE: You should use audio inputs of side AV connection cable (RED &
WHITE) to enable sound connection when connecting a device to your TV by
using PC or COMPONENT VIDEO input.
Headphone jack is used for connecting an external headphone to the system.5.
Connect to the HEADPHONE jack to listen to the TV from headphones (optional).
USB
5Vdc
Max:500mA
P\V-AV
SIDE AV

12 For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Power Connection
IMPORTANT: The TV set is designed to operate
on 220-240V AC, 50 Hz.
After unpacking, allow the TV set to reach the•
ambient room temperature before you connect the
set to the mains. Plug the power cable to the mains
socket outlet.
Aerial Connection
Connect the aerial ,cable TV plug to the AERIAL•
INPUT socket located at the rear of the TV.
HDMI 1
SPDIF
Coax.OUT
Using Digital Multimedia
Connectors
You can connect USB devices to your TV by using•
the USB input of the TV. This feature allows you to
display/play JPG, MP3 and video files stored in a
USB stick.
It is possible that certain types of USB devices (e.g.•
MP3 Players) may not be compatible with this TV.
You should back up your files before making any•
connections to the TV set in order to avoid any
possible data loss. that manufacturer will not be
responsible for any file damage or data loss.
Do not pull out USB module while playing a file.•
WARNING: Quickly plugging and unplugging
USB devices, is a very hazardous operation.
Especially, do not repeatedly quickly plug and
unplug the drive. This may cause physical damage
to the USB player and especially the USB device
itself.
SIDE VIEW USB MEMORY
5Vdc
Max:500mA
USB
USB Memory Connection
IMPORTANT: The TV should be switched off
while plugging or unplugging a USB device. Plug
your USB devices to the USB input of the TV. You can
connect a usb device to your TV by using the USB
input of the TV.
NOTE: It is possible certain types of hard disk
drives are not supported.
Connecting the LCD TV to a PC
For displaying your computer’s screen image on your
LCD TV, you can connect your computer to the TV set.
Power off both computer and display before making
any connections. Use 15-pin D-sub display cable to
connect a PC to the LCD TV. When the connection
is made, switch to PC source. See “Input selection”
section. Set the resolution that suits your viewing
requirements. Resolution information can be found
in the appendix parts
.
PC Input
(back)
Side AV Input
PC VGA Cable
(Not supplied)
PC Audio Cable
(Not supplied)
Side Audio/Video
Connection Cable
(Supplied)
Or
SIDE AV
Using Side AV Connectors
You can connect a range of optional equipment to your
LCD TV using side connectors of the TV.
For connecting a camcorder or camera , you should•
use AV socket (side). To do this, you must use the
supplied video/audio connection cable. First, plug
single jack of the cable to the TV’s AV IN socket
(side). Afterwards, insert your camera cable’s (not
supplied) connectors into the plural part of the video/
audio connection cable. Colours of the connected
jacks should match. See illustration below.
Afterwards, you should switch to• Side AV source. See
the section Input selection in the following sections
for more information.
Camera
AV Connection
Cable (supplied)
AV Cable
(not supplied)
Headphone
SIDE AV
To listen the TV sound from headphones, you•
should connect headphones to your TV by using the
HEADPHONE jack as illustrated above.

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
13
Connecting to a DVD Player
via Component Sockets
(YPbPr) or Scart Cable
Some DVD players are connected through•
COMPONENT SOCKETS (YPbPr). YPbPr can be
used only when you connect a device that has a
YPbPr output through the PC input with YPbPr to
PC cable (YPbPr cable is not supplied).
When the connection is made, switch to YPbPr•
source. See, “Input selection” section.
To enable audio connection, use the• VGA/
Component Audio cable. First, plug single jack
of the cable to the TV. Afterwards, insert your DVD
player’s audio cable’s connectors into the plural part
of the VGA/Component audio connection cable
(see illustration below). Colours of the connected
jacks should match ( RED & WHITE).
AV Connection
Cable (supplied)
Audio Cable
(not supplied)
To DVD Player's
Audio Outputs.
SIDE AV
When the connection is made, switch to• YPbPr source.
See, Input selection section.
You may also connect through the• SCART input.
HDMI 1
SPDIF
Coax.OUT
Scart Cable
(not supplied)
External device
NOTE: These three methods of connection perform
the same function but in different levels of quality. It is not
necessary to connect by all three methods.
Connecting to a DVD Player via
HDMI
Please refer to your DVD player’s instruction book
for additional information. Power off both the TV and
the device before making any connections.
NOTE: Not all cables shown in the illustration are
supplied.
If your DVD player has an• HDMI socket, you can
connect via HDMI for better video and audio quality.
HDMI 1
SPDIF
Coax.OUT
External device
(not supplied)
HDMI Cable
When you connect to DVD player as illustrated above,•
switch to the connected HDMI source. See, Input
Selection section for more information on changing
sources.

14 For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Remote Control Handset
Inserting Batteries
Remove the battery cover located on the back of•
the handset by gently pulling backwards from the
indicated part.
Insert two• AAA/R3 or equivalent type batteries
inside. Observe the correct polarity (+/-) when
inserting batteries and replace the battery cover.
NOTE: Remove the battery from remote control
handset when it is not to be used for a long period.
Otherwise it can be damaged due to any leakage of
batteries. Remote range is approximately 7m/23ft.
Switching On/Off
To Switch the TV On
Connect the power cord to the 220-240V AC 50 Hz.•
Then the standby LED lights up.(The led will blink
during the standby On/Off).
To switch on the TV from standby mode either:•
Press the “• ” button, P+ / P- or a numeric button
on the remote control.
Press the “• ” button, -P/CH or P/CH+ button on
the TV. The TV will then switch on.
NOTE: If you switch on your TV via PROGRAMME
UP/DOWN buttons on the remote control or on the
TV set, the programme that you were watching last
will be reselected.
By either method the TV will switch on.
To Switch the TV Off
Press the “• ” button on the remote control or press
the “ ” switch on the TV, so the TV will switch to
standby mode.
To power down the TV completely, unplug the•
power cord from the mains socket.
NOTE: When the TV is switched to standby
mode, standby LED can blink to indicate that features
such as Standby Search, Over Air Download or Timer
is active.
Input Selection
Once you have connected external systems to
your TV, you can switch to different input sources.
Press “SOURCE” button on your remote control
consecutively for directly changing sources.
NOTE: YPbPr mode can be used only when you
connect a device that has a YPbPr output through the
PC input with YPbPr to PC cable (not supplied).
Basic Operations
You can operate your TV using both the remote
control and onset buttons.
Operation with the Buttons on the TV
Main menu OSD cannot be displayed via control
buttons. “+/-” buttons will function as volume up/down
as default. Even if you set other functions for these
buttons, “+/-” buttons will perform as default after a
short while.
Volume Setting
Press “• P/V/AV” button once and then use “+/-”
buttons to increase or decrease volume, so a volume
level scale (slider) will be displayed on the screen.
While Tv is on, +/- button can use as volume + or
volume - as default.
Programme Selection
Press “• P/V/AV” button once and then use “+/-” buttons
to change channel. By pressing “+/-” button,you can
select the next or previous programme.

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
15
AV Mode
Hold the “• P/V/AV” button, source OSD will be displayed
in a few second.
Operation with the Remote Control
The remote control of your TV is designed to control•
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
Volume Setting
Press• “V+”button to increase the volume. Press “V-”
button to decrease the volume. A volume level scale
(slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
Press• “P -”button to select the previous
programme.
Press• “P +” button to select the next programme.
Programme Selection (Direct Access)
Press numeric buttons on the remote control to select•
programmes between 0 and 9. The TV will switch
to the selected programme. To select programmes,
press the numeric buttons consecutively. When the
pressing time is due for the second numeric button,
only the first digit programme will be displayed.
Press directly the programme number to reselect
single digit programmes.
First Time Installation
IMPORTANT: Ensure that the aerial is
connected before switching on the TV for the first
time installation.
When the TV is operated for the first time, installation•
wizard will guide you through the process. Next,
language selection screen will be displayed:
Use “• ” or “ ” buttons to select your language
and press OK button to set selected language and
continue.
After selecting the language, “• Welcome!” screen will
be displayed, requiring you to set Country,Teletext
Language and Scan Encrypted options.
By pressing “• ” or “ ” button, select the country
you want to set and press “ ” button to highlight
Teletext Language option. Use “ ” or “ ” button
to select desired Teletext Language.
Press “• ” button after setting Teletext Language
option. Scan Encrypted will be then highlighted.
You can set Scan Encrypted as Yes if you want to
scan coded stations.Afterwards select the desired
Teletext Language.
Press• OK button on the remote control to continue
and the following message will be displayed on the
screen:
To select the “Yes” or “No” option, highlight the item by
using “ ” or “ ” buttons and press OK button.
Afterwards, the following OSD will be displayed on the
screen and the digital television will search for digital
terrestrial TV broadcasts.
NOTE: You can press “M” button to cancel.
After all the available stations are stored, Channel•
List will be displayed on the screen. If you like
the sort channels, according to the LCN(Logical
Channel Number), please select “Yes” and than
press “OK”.

16 For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Press• OK button to quit channel list and watch TV.
Viewing Electronic Programme
Guide (EPG)
You can view the electronic programme guide (EPG)
to view information about available programmes.To
view the EPG menu please press EPG button on the
remote control.
Press “• ”/“ ” buttons to navigate through channels.
Press “• ”/“ ” buttons to navigate through the
programme list.
EPG menu displays available information on all•
channels.
Please note that event information is updated•
automatically. If there are no event information
data available for channels, EPG will be displayed
with blanks.
OK (Options): Displays programme options including
“Select Channel” option.
INFO (Event Details): Displays the programmes in
detail.
Green button: Programme schedule will be listed
Yellow button: Display EPG data in accordance with
timeline schedule.
Blue button (Filter): Views filtering options.
Red button (Prev Time Slice): Displays the
programmes of previous time slice.
Green button (Next Time Slice): Displays the
programmes of the next time slice.
Yellow button (Prev Day): Displays the programmes
of previous day.
Blue button (Next day): Displays the programmes
of the next day.
Numeric buttons (Jump): Jumps to the preferred
channel directly via numeric buttons.
OK (Options): Displays programme options including
“Select Channel” option.
Text button (Filter): Views filtering options.
INFO (Details): Displays the programmes in detail.
Red button (Prev Day): Displays the programmes
of previous day.
Green button (Next day): Displays the programmes
of the next day.
Yellow button (Zoom): Expands programme
information.
Blue button (Filter): Views filtering options.
INFO (Details): Displays the programmes in detail.
Numeric buttons (Jump): Jumps to the preferred
channel directly via numeric buttons.
OK (Options): Displays programme options including
“Select Channel” option.
Text (Search): Displays “Guide Search” menu.

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
17
SUBTTL: Press SUBTITLE button to view Select
Genre menu. Using this feature, you can search the
programme guide database in accordance with the
genre. Info available in the programme guide will
be searched and results matching your criteria will
be listed.
(Now) : Shows the current programme.
Installation
Press “M” button on the remote control and select
Installation by using “ ” or “ ” button. Press
OK button and the following menu screen will be
displayed.
Select Automatic Channel Scan (Retune) by using
“”/“ ”button and press OK button. Automatic
Channel Scan (Retune) options will be displayed. You
can select Digital Aerial, Analogue or Digital Aerial-
Analogue tuning using “ ”/“ ” and OK buttons.
Automatic Channel Scan (Retune) Menu
Operation
Digital: Searches and stores aerial DVB stations.
Analogue: Searches and stores analogue stations.
Full: Searches and stores both analogue and aerial
DVB stations.
Whenever you select an automatic search type and•
press OK button, a confirmation screen will appear
on the screen. To start installation process, select
Yes, to cancel select No by using .“ ” or “ ” and
OK button.
After auto channel scan type is set and selected•
and confirmed, installation process will start and
progress bar will move along. Press “M” button to
cancel process. In such a case, located channels
are not stored.
Manual Tuning
HINT: This feature can be used for direct broadcast
entry.
Select• Manual Channel Scan from the Installation
menu by using “ ”/“ ” and OK buttons. Manual
Scan options screen will be displayed.
Select the desired• Search Type using “ ” or “
” button. Manual search options will change
accordingly. Use “ ”/“ ” button to highlight an item
and then press “ ” or “ ” button to set an option.
You can press “M” button to cancel.
Digital Manual Search
In manual channel scan, the number of the multiplex
or frequency are entered manually and only that
multiplex or frequency are searched for the channels.
After selecting search type as Digital, you can enter
the multiplex or frequency number using the numeric
buttons and press OK button to search.
Analogue Manual Search
After selecting search type as analogue, you can use
“”/“ ” button to highlight an item and then press “
” or “ ” button to set an option.
Enter the channel number or frequency using the
numeric buttons. You can then press OK button
to search. When the channel is located, any new
channels that are not on the list will be stored.
Analogue Fine Tune
Select• Analogue Fine Tune from the Installation
menu by using “ ” or “ ” and OK buttons. Analogue
fine tune screen will be displayed. Analogue Fine
Tune feature will not be available if there are no
analogue channels, digital channels and external
sources stored.
Press• OK button to proceed. Use “ ” or “ ” button
to set Fine Tune. When finished, press OK button
again.

18 For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Clear Service List (*)
(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
Use this setting to clear channels stored. Press “ ” or
“” button to select Clear Service List and then press
OK. The following OSD message will be displayed
on the screen:
Press OK to cancel. Select Yes by pressing “ ” or “ ”
button and press OK to delete all of the channels.
Managing Stations: Channel List
The TV sorts all stored stations in the Channel List.
You can edit this channel list, set favourites or set
active stations to be listed by using the Channel List
options.
Press• “M” button to view main menu. Select
Channel List item by using “ ” or “ ” button. Press
OK to view menu contents.
Select Edit Channel List to manage all stored
channels. Use “ ” or “ ” and OK buttons to select
Edit Channel List.
Operating the Channel List
Press “• ” or “ ” button to select the channel that
will be processed. Press “ ” or “ ” button to select
a function on Channel List menu.
Use• P+/P- buttons to move page up or down.
Press• BLUE button to view filtering options.
Press• “M” button to exit.
Moving a Channel
First select the desired channel. Select Move option•
in the channel list and press OK button.
Edit Number screen will be displayed. Enter the•
desired channel number by using the numeric
buttons on the remote control. If there is a previously
stored channel on that number, a warning screen
will be displayed. Select Yes if you want to move the
channel and press OK.
Press• OK button to process. Selected channel is
now moved.
Deleting a Channel
You can press GREEN button to tag/untag all
channels; YELLOW button to tag/untag channel.
Select the channel that you want to delete and select•
Delete option. Press OK button to continue.
A warning screen will appear. Select• YES to delete,
select No to cancel. Press OK button to continue.
Renaming a Channel
Select the channel that you want to rename and•
select Edit Name option. Press OK button to
continue.
Pressing “• ” or “ ” button moves to the previous/
next character. Pressing “ ” or “ ” button toggles
the current character, i.e., ‘b’ character becomes ‘a’
by “ ” and ‘c’ by “ ”. Pressing the numeric buttons
‘0...9’ replaces the highlighted character with the
characters printed above the button one by one as
the button is pressed.
When finished, press• OK button to save. Press
“M” to cancel.
Locking a Channel
You can press GREEN button to tag/untag all
channels; YELLOW button to tag/untag a single
channel.
Select the channel that you want to lock and select•
Lock option. Press OK button to continue.
You will be asked to enter parental control PIN.•
Default PIN is set as 0000. Enter the PIN number.
Press• OK button when the desired channel is
highlighted to lock/unlock the channel. Lock symbol
will be displayed next to the selected channel.