HKBN SensePlus MX-AQ-01 User manual

1
SensePlus Indoor Air Quality Monitor
(Model：MX-AQ-01)
HKBN Home User Guide
v.20200930

2
Table of Contents
Product Description ...........................................................................................3
Download HKBN Home App...............................................................................4
Add Device.........................................................................................................5
Control Device
- Introduction of Control Panel .............................................................9
- Browsing index records ....................................................................10
Automation (Smart Action)..............................................................................11
Device Information
- Setting Page Panel............................................................................14
- Check for Firmware Upgrade............................................................15
- Remove Device.................................................................................16
Product Specifications .....................................................................................17
Product Maintenance and Warranty................................................................18

3
Product Description
Name : SensePlus Indoor Air Quality Monitor
Model : MX-AQ-01
Features: 1. Monitor indoor air quality, including PM2.5, TVOC, CO2, HCHO,
humidity and temperature.
2. Collect data on air quality to trigger automated smart action

4
Download HKBN Home App
OR
Scan the QR code below
Search and download “HKBN Home”
APP in Apple App Store OR Google
Play Store

5
Add Device
1. You must first connect your phone to a 2.4GHz Wi-Fi network when
adding device;
2. Tap “Devices” on the bottom menu (image 1);
3. Tap “Add Device” button OR “+” icon at top right corner if you already
have paired device (image 2);
(image 1)
(image 2)

6
4. Tap “SensePlus Indoor Air Quality Monitor”from left menu “Home
Appliance”(image 3);
5. Hold the Wi-Fi button until the Wi-Fi indicator blinks (image 5);
(image 3)
(image 4)
(image 5)

7
6. Select Wi-Fi network and enter password*, and then tap “Next” (image
6);
7. Please wait a moment while your device is in pairing process. (image
7)
⚫Currently all smart devices are compatible to 2.4GHz network only. Please make sure
that your device and mobile are connected with 2.4GHz but not 5GHz Wi-Fi network.
⚫If you have 2.4GHz and 5GH Wi-Fi channel and they are using same SSID, we suggest
to edit it to different name before pairing. If you insist to use the same SSID on two
channels, please turn off the 5GHz channel first before pairing.
⚫
*Important tips: Wi-Fi requirement
(image 6)
(image 7)

8
8. After device added successfully, you can change the device name and
assign it to the located room. (You can also change the device name
and room location later in device setting page and room management
page.) And you can find the paired device in the “Device” page.
Device
Name
Room
Selection

9
Control Device
•Introduction of Control Panel
Humidity
Temperature
Air Quality Level
Device Information
CO2
TVOC
Statistical Detail
PM2.5
HCHO
Air Quality: Bad
Air Quality Index
Colour
Level
Fine
Good
OK
Bad
Index Range
Index
Range
Accuracy
Temp
HMD
Reference for the air quality standard and index range

10
•Browsing index records
You can tap “Statisitical detail” to check different indoor air quality index.
(past one month records)
Date