Hobie Mirage Stand Up Eclipse Display User manual

Hobie Mirage Stand Up
Eclipse Display
Instructions
® ®

2
MIRAGE ECLIPSE
Foam Stand Installation
Attachment:
Start with one end piece
and slide one of the
middle foam pieces into
the aligned hole. Do the
same thing with the sec-
ond middle piece, then cap
the exposed ends with the
second end piece.
Parts:
This box includes two mid-
dle foam pieces, two end
foam pieces, four bungee
cords, and two side Mirage
eclipse signs.
b.
a.
c.
d.
e.
MIRAGE ECLIPSE
x 4
x 2
x 2
x 2

3
Side Panel Installation
Bungees:
Attach the four bungees to
one of the signs in all four
corners.
Attachment:
Align one sign to the side
of the foam structure
with the bungees facing
inward. Loop the
bungees to the
corresponding ends of
the second sign. Repeat
the same process for the
second two
bungees. The signs
should bow out against
the foam structure once
all four bungees are
attached.

PN 87363260
REV 160316
Hobie Cat Company
Holding Company
Oceanside, California, USA
1-800-HOBIE-49
hobiecat.com
Hobie Cat Australasia
Subsidiary
Huskisson, New South Wales, Australia
1-800-4-HOBIE
hobiecat.com.au
Hobie Cat Europe
Subsidiary
Toulon, France
[phone]
hobie-cat.net
Hobie Cat Brasil
Independent Distributor
Porto Belo, Santa Catarina, Brazil
[phone]
hobiecat.com.br