Hodedah HITV107-G User manual
HODEDAH ®
Assembly Instructions
This instruction booklet contains important safety information, please read and keep for future reference.
ITEM # HITV107-G
57 INCH WIDE TV STAND
2 people
90 mins
1 YR LTD
1 Box
FRONT VIEW BACK VIEW
Accommodates up to a 60 inch TV
www.Hodedah.com 1| Page
Product Dimensions: Height 21.62" x Width 57" x Depth 17.75"
HODEDAH ®
www.Hodedah.com 2| Page
DO NOT RETURN PRODUCT TO THE STORE
Phone WebsiteEmail
Questions, need parts, we are here to help!
WARRANTY
WARNING
If parts are missing or damaged please contact our customer service team and we will
gladly ship your replacement parts FREE of charge within ONE YEAR of purchase!
Hodedah warrants this product to be free from defects in materials and workmanship and agrees to
remedy any such defect. This warranty covers one year from the date of original purchase. This is solely
limited to replacement of defective parts and no assembly for labor is included. This warranty does not
apply to any product that has been improperly assembled, subjected to misuse, abuse or which has been
altered or repaired in any way. To obtain warranty service, original purchaser must present the following;
original bill of sale, date of purchase, where the product was purchased and images if applicable.
Components replaced warranted through the remainder of the original warranty only. The defective part
will be replaced without charge, subject to the terms and conditions described above.
Mon - Fri | 9:30 am to 5pm EST Send us an email
FOR PROMPT, RELIABLE SERVICE PLEASE HAVE YOUR INSTRUCTION MANUAL READY
Visit our website to open a case
1 - 855 - HODEDAH
1 - 855 - 463 -3324
·This product contains small parts, keep away from children.
·This product contains plastic bags, keep away from children.
·Serious or fatal crushing injuries can occur from furniture tip-over. To help
prevent this, place heaviest items on the lower shelves and drawers. Do not set
heavy objects on top shelves and drawers.
·Never allow children to climb or hang on drawers, shelves and doors.
·Never open more than one drawer at a time.
·The use of tip-over restraints may reduce but not eliminate the risk of tip-over.
HODEDAH ®
www.Hodedah.com 3| Page
Product Care and Maintenance
Let's get started…
·Never open more than one drawer at a time.
·The use of tip-over restranits may reduce but not eliminate the risk of tip-over.
·Make sure you receive all boxes. If your item is packed in one box, box count will read 1
of 1, likewise if your item is packed in two boxes, box count will read 1 of 2 and second
box will read 2 of 2.
·Read each step carefully. It is very important that each step is performed in the correct
order. If these steps are not followed in sequence, assembly difficulties will occur.
·Work in a spacious level area, preferably carpet, near the place the unit will be used.
·DO NO USE power tools to assemble your furniture, it will strip and damage parts.
·Your package should include the following hardware and parts. Parts are labeled or
stamped on the raw edge. Please inspect contents to ensure you have received all
components. If you are missing any hardware or parts please contact customer
service right away before assembly.
Helpful hints, read before beginning assembly
Assembly Tools Required (not supplied)
·Wipe clean with dry soft cloth, never use chemicals or cleaning products they will
damage the finish.
·Avoid placing your furniture in direct sunlight, as sunlight causes fading.
·Never push, drag or pull your furniture, to move to a new location carefully with
two or more people carry the unit to its new location.
·Avoid extreme changes in temperature by arranging furniture away from radiators,
heat and air vents and air conditioning units.
Hammer Phillips Screwdriver No Power Tools NeededTape Measure
HODEDAH ®
www.Hodedah.com 4| Page
Hardware List
Accessories
1QTY
16 Pcs
4
QTY
6
QTY QTY
Pvc Dowel
8QTY
11 QTY
Allen Key
7QTY 9QTY
2 Sets
Magnet
12 QTY
2 Pcs
4 Pcs
Important
1. Before you throw the package, please use the Check
Box to identify the parts and hardware to ensure that
you have everything you need.
2. Check and measure the bolts before applying them to
parts.
3. Do not completely tighten all hardware until the entire
assembly is complete, unless indicated otherwise.
10 QTY
4 Pcs
Shelf Support
1 Pc
Handle
Screw M4 X 20mm
Door Support
Glass Round Bracket 180˚
12 Pcs
PVC Square Leg
6 Pcs
40 Pcs
QTY
2
Screw M3.5 x 14mm
36 Pcs
3
QTY
8 Sets
Pvc Cap
Mini Fix
8 Pcs
4 Pcs
AIM
Nail
Screw M6 x 40mm 8 Pcs
Pvc Cap 8 Pcs
5
12
(separate from
hardware pack)
Anti-Tip Kit
QTY
1 PK
HODEDAH ®
www.Hodedah.com 5| Page
AQTY
1 Pc
BQTY CQTY
DQTY EQTY FQTY
GQTY HQTY IQTY
Parts List
JQTY
Right Door
456 x 385 x 15mm
Left Door
456 x 385 x 15mm
Back Panels
1440 x 254 x 3mm
Adjust Panels
597 x 394 x 15mm
Bottom Panel
1448 x 446 x 15mm
Left Side Panel
464 x 445 x 15mm
Left Stand Panel
464 x 445 x 15mm
Right Stand Panel
464 x 445 x 15mm
Right Side Panel
464 x 445 x 15mm
1 Pc 1 Pc
1 Pc 1 Pc 1 Pc
Top Panel
1448 x 446 x 30mm
1 Pc 1 Pc
2 Pcs
1 Pc
HODEDAH ®
www.Hodedah.com 6| Page
The Breakdown
HODEDAH ®
www.Hodedah.com 7| Page
Pre - Assembly
6SHELF SUPPORT
4 Pcs.
1Pvc Dowel
16 Pcs. 4Mini Fix
8 Pcs. 4Mini Fix
8 Pcs.
8Magnet
2 Pcs.
AIM
Insert, push down and tighten
mini fixscrew ④, to` the hole as
shown, 8pcs.
Insert mini fix ④(nuts) with the cross
arrow mark facing upward and aim to
the panel B,C,D,E's top thru holes.
(As shown)
Insert pvc dowels ①to both end of
the panels B, C, D, Eas shown. Using
hammer to gently tap them in.
Insert magnet ⑧to panels C
and Das shown.
HODEDAH ®
www.Hodedah.com 8| Page
Door Panel Assembly
+-
12
Handle
2 Pcs.
8
Magnet
2 Pcs. 128
Magnet
2 Pcs.
Screw M4 X 20mm
4 Pcs.
Screw M3.5 x 14mm
12 Pcs.
2
Glass Round Bracket 180˚
12 Pcs.
7
Door Support
4 Pcs.
5
Put the glasses on backside of the panel
Gand H as shown, next use
Glass Round
Bracket
⑦to mount and fix the glass
edge as shown, then tighten it with screw
②, after that close the
Glass Round Bracket
⑦lid to cover the screws.
Insert door
supports ⑤to
both end of door
panel Gand H.
Tighten 2 screws ⑫from
panel Gand H's thru hole
into the handle ⑫holes.
Fix and tighten
metal piece ⑧
with screw ⑧
at door panel
Gand Has
shown.
HODEDAH ®
www.Hodedah.com 9| Page
Step 1
Screw
M 6 x 40mm
8 Pcs.
3Allen Key
1 Pc.
11
Fix Panel B,C,Dand Eonto Panels Aby pushing and slotting the dowels
onto the non-thru holes at Panel A. Use allen key ⑪to tighten 8 screws ③
from the thru-holes of panel A.
HODEDAH ®
www.Hodedah.com 10| Page
Step 2
Screw
M3.5 x 14mm
24 Pcs.
PVC Square Leg
6Pcs.
2 9
Place and fix panel Fonto panel B,·panel C, panel D and panel
E, and align properly by inserting the 8 (down) mini fix screws ④
onto the L-thru holes at top edge of panel B, C, Dand E. At the
same time, pushing and light tapping of panel Fdownward to
have panel B, panel C, panel Dand panel E's upside dowel
going onto panel F's non-thru holes. Mini Fix Cap 8 Pcs.
Place PVC Square Leg ⑨at the panel A
as shown. Then tighten Support leg ⑩with
4 screws ②.
*Then, tighten mini fix ④
clockwise to lock the
mini fix up, for
tightening panel Fup.
Cover 8 mini fix caps
provided by pushing the
cover 's stem onto the
hole of mini fix nut on
upper side of panel B,
C, Dand E.
HODEDAH ®
www.Hodedah.com 11| Page
Step 3
Align properly the door supports
⑤to door Gand Hand push to
slot onto the non-thru hole of top
panel F and bottom panel A.
Then take the adjust panel Iand
place it inside the middle
compartment by putting it on top
of the 4 shelf supports.
HODEDAH ®
www.Hodedah.com 12| Page
Step 4
Allen Key
40 Pcs.
10
Place the back Panels J
onto the back of the main
unit, then align them
properly for nailing.
2.Use hammer to insert the
nails at the center of the
edges. Gap between nails
should be about 100mm.
HODEDAH ®
www.Hodedah.com
TP 6#x5/8'' Screw
2Pcs.
Mounting bracket
4Pcs.
Restraint strap
2Pcs.
·Attach the mounting bracket a to the furniture in the
solid part below the top panel a few inches away from the
side of the unit.
·Screw b through the smallest hole of a .
FITTING OF ANTI-TIP SAFETY STRAP
STEP 1:
STEP 2:
·Locate a stud in the wall
behind the unit,does not
have to be centered.
·Place the other mounting
bracket a on the wall
stud 2 inches below the
mounting bracket
secured to the back of
your unit.
·Attach to the wall stud
using c through the
smaller hole of a .
·Repeat the same step a few inches away from
the other side of the unit.
·Place the furniture into position so both mounting
brackets are vertically in line.
·Lace the end of the restraint strap through the
larger holes in each mounting bracket.
·Secure the straps and lock into place.
STEP :
TP 8#x2'' Screw
2Pcs.
BACK SIDE OF
TOP PANEL
WALL
FURNITURE
13| Page
HODEDAH ®
www.Hodedah.com 14| Page
Job Complete
Enjoy & Thank you for purchasing from Hodedah!
Table of contents
