Hollyland Mars M1 User manual

Mars M1
User Guide
V1.0

1. Specifications
Category
Item
Details
Size & Interface
Weight
380g (without antenna)
Size
152*96*40mm (without antenna)
Interface
DC IN: 2.0mm Power Port
DC OUT: 2.0mm Power Port
SDI IN: 3G SDI
HDMI IN: HDMI 1.4b
HDMI OUT: HDMI 1.4b
TYPE C: USB 2.0 OTG
3.5mm Headphone Monitor Interface
Antenna: SMA Male Port
Wireless
Parameters
Frequency
5.1-5.8 GHz
Transmission Power
<21dBm
Frequency Bandwidth
20MHz
Modulation Mode
802.11n
Sensitivity
-80dBm
MIMO
2T2R
Code and Rate
Maximum Data Rate
12Mbps
Video Coding
H.264
Electrical
Performance
Parameters
Power Consumption
TX<14W, RX<10W (1 to 2)
TX<10.5W, RX<9W (1 to 1)
Supply Voltage Range
6~16V
Output Voltage
8.4V±5%
Duration
About 4 Hours (NP-F970 Battery 7800mAh)
Audio & Video
Parameters
Input Video Format
HDMI:
720p 50/59.94/60Hz
1080i 50/59.94/60Hz
1080p 23.98/24/25/29.97/30/50/59.94/60Hz
3840*2160p 23.98/24/25/29.97/30Hz
4096*2160p 23.98/24/25/29.97/30Hz
SDI:
720p 50/59.94/60Hz
1080i 50/59.94/60Hz
1080p 23.98/24/25/29.97/30/50/59.94/60Hz

Output Video Format
TX HDMI：
720p 50/59.94/60Hz
1080i 50/59.94/60Hz
1080p 23.98/24/25/29.97/30/50/59.94/60Hz
3840*2160p 23.98/24/25/29.97/30Hz
4096*2160p 23.98/24/25/29.97/30Hz
RX HDMI：
720p 50/59.94/60Hz
1080i 50/59.94/60Hz
1080p 23.98/24/25/29.97/30/50/59.94/60Hz
Color Depth Mode
8bit, RGB limit/full，YUV444/422
Input Audio Format
SDI Embedded 2 channels，HDMI Embedded up to 8 channels
Output Audio Format
HDMI Embedded up to 8 channels
Transmission
Parameters
Transmission Data Rate
TX to RX 12Mbps
TX to APP 4Mbps
Delay
1080p60:
84ms TX to RX (1 to 1 connection)
Distance
150m Between TX & RX (LOS)
100m Between TX & APP (LOS)
Reliability
Parameters
Working Temperature
-10℃ to 60℃
Storage Temperature
-40℃ to 60℃
QVC drop test requirment
Reference Standard: GB/T 2423.8-1995
Vibration Standard
Reference Standard: GB T 2423.10-2008
ESD Electrostatic
Contact Discharge±6KV, Air Discharge±8KV

2. Packing List
Name
Num
1. Monitor
*1
2. Capsule Antenna
*2
3. Tempered Glass Screen Protector
*1
4. OTG Adapter
*1
5. D-Tap to DC Cable
*1
6. User Manual
*1
7. Warranty Card
*1

3. Interface & Keys
Interface
Function
1. 3.5mm Earphone Interface
Monitor the audio through 3.5mm TRRS earphone
2. 1/4 Screw Hole
Mount horizontally on camera through magic arm
3. USB Interface
USB upgrade, 3D-LUT import
4. Power, Lock Screen Key
Long-press 3s to power ON/OFF; Click to lock/unlock the screen
5. DC OUT
DC OUT 8.3~8.6V/1A
6. DC IN
DC IN, support 6~16V
7. NP-F battery plate
Supports NP-F 970/750/550 battery power supply
8. Antenna
Video transmission antenna 5.1~5.9GHz
9. SDI IN
SDI IN Video Input (Only work in TX mode)
10. HDMI IN
HDMI IN Video Input (Only work in TX mode)
11. HDMI OUT
HDMI OUT Video Output

4. Status Display
Status
Detail
1. Device Mode
Current mode: 【Transmitter】/【Receiver】
2. Channel
Mars M1 current channel
3. Connection
RX1/RX2 connection signal
4. Video Input Format
Video Input: Display current video input format
No Video Input: Display 【NO VIDEO】
5. LUT name display
Displays the loaded LUT file name
6. USB Disk icon
Only display when USB disk plug in
7. Earphone icon
Only display when earphone plug in
8. Battery Voltage
7.0V lower battery warning
9. Image Analysis Options
Monitor corresponding image analysis function
10. Setting
Monitor settings menu button
11. record
Click the button to enter the recording state
12. Playback
Click the button to enter the interface of the previous recording video

5. Setting
Tip: Click 【Setting】icon in the bottom right corner to enter the menu
Transmitter Status:

Receiver Status:
Display Settings：

5.1. Channel Switch
Operation: Enter menu 【Wireless Settings】--> 【Channel Switch】--> Click corresponding 【CH-】to
switch the channel.
Note: The frequency number and frequency band vary by country and region.
(There are 13 frequencies in China, 8 in the United States, 8 in Japan, and 8 in Europe.)
5.2. Function Switch
Operation: Enter menu【Wireless Settings】-->【Function Switch】--> Click【Transmitter】or【Receiver】
to switch TX or RX mode.
5.3. Pair
Operation:
(1) Mars M1 as a TX/RX to enter the menu【Wireless Settings】--> 【Pair】--> Click Pair
(2) RX/TX to enter the pairing mode.
Note: TX and RX need to enter pairing mode at the same time.
5.4. Fan Control
Operation: Enter menu 【Wireless Settings】--> 【Fan Control】--> Click 【Mute】or 【Auto】to change
fan working mode.

5.5. Brightness
Operation: Enter menu 【Display Settings】--> 【Brightness】--> Drag the slider to adjust brightness
5.6. Volume
Operation: Enter menu 【Display Settings】--> 【Volume】--> Drag the slider to adjust the monitoring
volume
5.7. UV Display Settings
UV Display: Display/Turn off【Audio Level Display】
Operation: Enter menu 【Display Settings】--> 【UV Display】--> Click to turn ON/OFF
5.8. Language Setting
Operation: Enter menu 【Display Settings】--> 【Language】--> Click 【中文】 or 【English】to change
Language.