holusion Iris 22 Support User manual

Iris 22 Support Assembly Guide
Summary :
Contents of delivery 2
Assembling 3
Assembling the 4 faces 3
Installation of the product 5
Tel : [phone] [email protected]
HOLUSION SAS -111 avenue Jean Lebas 59100 Roubaix

Contents of delivery
- 4 sides of the structure (2x2 symmetrical pieces)
- Screw and bolt
- Wheels x4
Tel : [phone] [email protected]
HOLUSION SAS -111 avenue Jean Lebas 59100 Roubaix

Assembling
Assembling the 4 faces
Position a first face perpendicular to a non-identical face. Then fix the 8 screws (4
on each side).
Repeat this until all 4 sides are assembled.
Tel : [phone] [email protected]
HOLUSION SAS -111 avenue Jean Lebas 59100 Roubaix

All that remains is to assemble the wheels by fixing the 3 bolts.
The support is now assembled
Tel : [phone] [email protected]
HOLUSION SAS -111 avenue Jean Lebas 59100 Roubaix

Installation of the product
Take the Iris out of its case (video available: https://youtu.be/97usClzj2_c ), install
it on the furniture. The feet of the terminal must be positioned in the holes of the
upper part of the structure.
Plug the supplied power supply into the power port on the back of the Iris 22 and
into a power outlet.
Turn on the Iris 22 using the power button on the back of the product and wait
for charging to complete.
Do not hesitate to contact the technical support (9am-5pm) :
Sebastien DUMETZ
[email protected]
06.73.80.44.59
We hope you will be satisfied with the use of the Iris 32. Do not hesitate to
contact us if you have any questions or comments.
Tel : [phone] [email protected]
HOLUSION SAS -111 avenue Jean Lebas 59100 Roubaix