Holux M-241 User manual

HOLUX
M-241 Wireless GPS
Logger
Quick Guide
Version 1.3
2007.08.06
1

Packing List
1. M-241 wireless GPS logger 1 Set
2.AABattery 1Set
3. Car Cigarette adapter + USB cable 1 Set
4. User guide and Driver CD 1 Pcs
5. Smart2go DVD 1 Pcs
6. M-241 Quick Guide 1 Pcs
7. Warranty card 1 Pcs
Option
8. Travel power supply 1 Set
Product Overview
1
LCD Screen
2
MENU Button
3
ENTER Button
4
Power Switch
5
Battery Cover
6
USB Port
Battery type: 1 AA
1
2
3
4
5
6
Button Define
MENU Button -> Change & Select function.
ENTER Button -> ENTER & OK & START & STOP & BEGIN &
END function.
When the user presses the “MENU” key and “ENTER” key at the same time,
all keys function will “LOCK”, and press the “MENU” key and “ENTER” key
at the same time again, the “LOCK” status will cancel.
2

BasicOperations
3

LCDDisplayOverview
Icons&Indicators
Icon Descriptions Icon Descriptions
Log by Time Measure Distance On
Log by Distance Lock On
Log On Device & PC Connected
Record Flag Battery is full
Bluetooth Connection Battery is exhausted
GPS Fix
：Track Log Mode
：Time Mode
：Show Position Mode
：Show Speed & Altitude Mode
：Measure Distance Mode
：Setting Mode
4

ConnectingthedevicetoPC
UsingUSBCable
5
1. Power On the device.
2. Connect the device to a computer
with the USB cable provided in the
package.
3. Install the USB driver
“CP210x_VCP_Win2K_XP.exe ”
from the CD provided in the
package.
4. Click <Start> menu, select →
<Setting>, then enter→
<Controller> and select <System>
Select <Device Manager> Find the
< Connector (COM & LPT)>and
check the “CP210xUSB to UART
Bridge Controller” message.
Please note that the virtual COM port
number might be different on every
com
p
uter. Before usin
g
navi
g
ation
COM Port
Using Bluetooth
Power On the device, and connect the device to a Host with the
Bluetooth interface.

DownloadLogDatatoPC
1. The user can use Holux application software ”
HoluxUtility.exe” to download the log data to the PC after
connecting the device to the PC, and easily export the log
data to “Google Earth” or “locr GPS Photo”.
2. Concerning all details for ”HoluxUtility.exe” and “Google
Earth” and “locr GPS Photo”, please see the “M-241 User
Manual-V1.2_EN.pdf” and “google_earth_user_guide.pdf”
Notice
1. When “Battery low” icon is blinking on LCD, please replace a
fresh new battery.
2. For good GPS signal receiving, please
keep the device strap hold up., see the
figure of top view.
3. This device is not waterproof and should not be exposed to
excessive moisture.
4. Align the poles + and - correctly when inserting batteries.
5. Do not disassemble, crush, short-circuit, or incinerate a
battery as it may cause fire, injury, burns, or other hazards.
6. This device has notcharge capability.
7. Before turning off, please press “stop” button when device is in
logging mode to prevent log data damaged.
6