Holz-Blech ANNA 28 User manual

× 10
× 12
× 190
× 25
× 20
5×70
4×506×1401,4×40
M8×60
Ø 3 mm
Ø 4 mm
Ø 5 mm
Ø 8 mm
× 60
4×40
1/18
ANNA 28
PREPARE THE GROUND, UNWRAP THE PACKAGE,
LAY OUT THE COMPONENTS, FIND THE TOOLS.

2/18
ANNA 28
MAKE SURE THAT THE FOUNDATION
IS INSTALLED ON A LEVEL SURFACE.
CHECKING ALL DIRECTIONS,
INCLUDING CORNER TO CORNER. 3%
LAY OUT THE FOUNDATION BEAMS
AND SQUARE IT BY MEASURING
FROM CORNER TO CORNER.
IFB
AC
DB
AB=CD
0°

BLG-1
ALG-1
× 3× 8
5×70
6×140
Ø 4 mm
Ø 5 mm
3/18
ANNA 28
LAY OUT THE BOTTOM LOGS,
ATTACH TO THE FOUNDATION.
THE WALL LOGS WILL HANG OVER
THE FOUNDATION BEAMS BY
APPROXIMATELY 5MM. THIS OVERHANG
IS DESIGNED AS A RAIN DRIP. 5%
2 BL-1
6×140
1 BL-1
1 BL-1
5×70
5mm

× 4
5×70Ø 4 mm
× 3
6×140Ø 5 mm
4/18
ANNA 28
7%
ATTACH THE FIRST ROW OF
WALL LOGS INTO THE BOTTOM
LOGS WITH SCREWS.
2 LG-5
1 LG-2
1 LG-2
6×140
5×70

5/18
ANNA 28
12%
AFTER PLACING 3-4 ROWS OF WALL LOGS, TAP EACH
WALL LOG IN PLACE USING A HAMMER AND THE
HITBLOCK PROVIDED, TO TIGHTEN THE LOGS.
HITBLOCK

6/18
ANNA 28
13%
SLIDE THE DOOR IN,
ATTACH THE HANDLE.
BD1R
3 LOGS IN PLACE

× 4
6×140Ø 5 mm
7/18
ANNA 28
42%
INSTALL THE GABLES WITH LONG SCREWS
TO THE WALL LOGS ON THE FRONT AND
REAR WALLS.
15 LOGS IN PLACE
A TL-1
GABLE
B TL-1
GABLE

× 2
6×140Ø 5 mm
8/18
ANNA 28
43%
INSTALL THE ROOF PURLINS AND
ATTACH THEM WITH SCREWS.
RFR

RB
× 92
4×50
9/18
ANNA 28
PLACE THE FIRST ROOFBOARD FLUSH WITH
THE END OF THE PURLINS AND ATTACH
WITH 4 SCREWS, 2 INTO EACH NEXT,
SAW THE LAST BOARD TO MAKE IT FIT.
84%

× 20
4×40
10/18
ANNA 28
INSERT FOR THE FASCIA TRIMS
SCREWS AFTER EVERY 0,5 METERS.
85%
RR1
RR2

× 28
4×40Ø 3 mm
11/18
ANNA 28
87%
EAVES EDGES GO ON TOP
OF THE ROOFING*.
*(NOT INCLUDED) RF
EE

× 4
4×40Ø 3 mm
12/18
ANNA 28
88%
ATTACH ROMBS WITH SCREWS.
ROMB

× 72
4×50
13/18
ANNA 28
89%
8 SCREWS INTO THE FIRST FLOORBOARD,
4 INTO EACH NEXT, SAW THE
LAST BOARD TO MAKE IT FIT.
FB

× 20
1,4x40
14/18
ANNA 28
96%
SAW THE BASEBOARDS
AND ATTACH WITH NAILS
AT EVERY 0,5 METERS.
BB

× 12
M8×60
Ø 8 mm
15/18
ANNA 28
97%
DRILL THROUGH THE WALL, HOLE MUST
BE AT THE BOTTOM OF THE OVAL,
ATTACH WITH BOLT.
4CM
20CM
WINDBOARD

90º
90º
16/18
ANNA 28
98%
IF DOOR IS TILTED,
PUSH THE DOOR FRAME SO
THAT ALL CORNERS ARE 90º.

17/18
ANNA 28
99%
IF DOOR IS NOT ON THE RIGHT HEIGHT,
ADJUST 3 SCREWS ON DOOR HINGES.

18/18
ANNA 28
WHEN THE HOUSE IS ASSEMBLED, YOU SHOULD
COVER THE TIMBER WITH WOOD PROTECTIVE SEAL,
PAINT OR STAIN AS SOON AS POSSIBLE TO AVOID
DETERIORATION TO THE WOOD.
100%