Holz-Blech Annika II 28 User manual

× 70
× 15
× 12
× 320
× 30
× 35
4×405×70
4×506×1401,4×40
M8×60
Ø 3 mm
Ø 4 mm
Ø 5 mm
Ø 8 mm
1/18
ФФANNIKA II 28
PREPARE THE GROUND, UNWRAP THE PACKAGE,
LAY OUT THE COMPONENTS, FIND THE TOOLS.

2/18
ФФANNIKA II 28
MAKE SURE THAT THE FOUNDATION
IS INSTALLED ON A LEVEL SURFACE.
CHECKING ALL DIRECTIONS,
INCLUDING CORNER TO CORNER. 3%
LAY OUT THE FOUNDATION BEAMS
AND SQUARE IT BY MEASURING
FROM CORNER TO CORNER.
IFB
AC
DB
AB=CD
0°

× 12 × 7
5×70
6×140
Ø 4 mm
Ø 5 mm
3/18
ФФANNIKA II 28
LAY OUT THE BOTTOM LOGS,
ATTACH TO THE FOUNDATION.
THE WALL LOGS WILL HANG OVER
THE FOUNDATION BEAMS BY
APPROXIMATELY 5MM. THIS OVERHANG
IS DESIGNED AS A RAIN DRIP. 5%
2 BL-1
6×140
1 BL-1
1 BL-2
A LG-4 5×70
5mm
C LG-4
1 BL-3
B LG-4

× 6
5×70Ø 4 mm
× 7
6×140Ø 5 mm
4/18
ФФANNIKA II 28
7%
ATTACH THE FIRST ROW OF
WALL LOGS INTO THE BOTTOM
LOGS WITH SCREWS.
2 LG-1
1 LG-1
1 LG-2
6×140
5×70
1 LG-3

5/18
ФФANNIKA II 28
12%
AFTER PLACING 3-4 ROWS OF WALL LOGS, TAP EACH
WALL LOG IN PLACE USING A HAMMER AND THE
HITBLOCK PROVIDED, TO TIGHTEN THE LOGS.
HITBLOCK

6/18
ФФANNIKA II 28
13%
SLIDE THE DOOR IN,
ATTACH THE HANDLE.
BDD1R
3 LOGS IN PLACE
BD2R

7/18
ФФANNIKA II 28
26%
DON`T FORGET TO
TIGHTEN THE LOGS AFTER
EVERY 3-4 ROWS.

× 12
6×140Ø 5 mm
8/18
ФФANNIKA II 28
42%
INSTALL THE GABLES WITH LONG SCREWS
TO THE WALL LOGS ON THE FRONT AND
REAR WALLS.
16 LOGS IN PLACE
2 TL-1
C LG-1
A LG-1
C LG-2
C LG-3
1 TL-1
A LG-3
A LG-2
B LG-1
B LG-2
B LG-3

× 3
6×140Ø 5 mm
9/18
ФФANNIKA II 28
43%
INSTALL THE ROOF PURLINS AND
ATTACH THEM WITH SCREWS.
RFB

× 135
4×50
10/18
ФФANNIKA II 28
PLACE THE FIRST ROOFBOARD FLUSH WITH THE
END OF THE PURLINS AND ATTACH
WITH 6 SCREWS, 3 INTO EACH NEXT,
SAW THE LAST BOARD TO MAKE IT FIT.
46%
RB

× 44
4×40
11/18
ФФANNIKA II 28
79%
FOR THE FASCIA TRIMS INSERT
SCREWS AFTER EVERY 0,5 METERS.
RR2
RR3

×20
4×40Ø 3 mm
12/18
ФФANNIKA II 28
83%
EAVES EDGES GO ON TOP
OF THE ROOFING*.
*(NOT INCLUDED)
EE
RR2

× 160
4×50
13/18
ФФANNIKA II 28
89%
14 SCREWS INTO THE FIRST FLOORBOARD,
7 INTO EACH NEXT, SAW THE
LAST BOARD TO MAKE IT FIT.
FB

× 35
1,4×40
14/18
ФФANNIKA II 28
96%
SAW THE BASEBOARDS
AND ATTACH WITH NAILS
AT EVERY 0,5 METERS.
BB

× 12
M8×60
Ø 8 mm
15/18
ФФANNIKA II 28
97%
DRILL THROUGH THE WALL, HOLE MUST
BE AT THE BOTTOM OF THE OVAL,
ATTACH WITH BOLT.
4CM
20CM
WINDBOARD

90º
90º
16/18
ФФANNIKA II 28
98%
IF DOOR IS TILTED,
PUSH THE DOOR FRAME SO
THAT ALL CORNERS ARE 90º.

17/18
ФФANNIKA II 28
99%
IF DOORS ARE IN DIFFERENT HEIGHTS
OR THERE IS A GAP BETWEEN THEM,
ADJUST 3 SCREWS ON DOOR HINGES.

18/18
ФФANNIKA II 28
WHEN THE HOUSE IS ASSEMBLED, YOU SHOULD
COVER THE TIMBER WITH WOOD PROTECTIVE
SEAL, PAINT OR STAIN AS SOON AS POSSIBLE TO
AVOID DETERIORATION TO THE WOOD.
100%