HOMCLOUD Flight 1S User manual

QUICK GUIDE
Flight 1S

1
What's in the box
Consult the checklist below for all components.
Bracket screws
Bracket
User Manual
Flight 1S
Mounting bracket(optional)
Wire Nuts
Pin
Screwdriver
A x 3 B x 3

2
Reset
SD card
slot
PIR & Status light
MIC
Lens
Light
Introduction
Description
Power
Status light
AC 100~240V
Red light solids on: the camera network is abnormal
Blinking red light: awaiting WiFi connecting
Blue light solids on: camera running correctly
Blinking blue light: currently connecting
Captures sounds for your video
Supports local SD Card storage (Max.128G)
Press and hold the 'reset' for 5 seconds to reset the device (if
you have modified settings, they will return to factory defaults)
Microphone
SD card slot
Light Turn the light on/off manually or automatically
Reset
PE - GroundL
N

3
Wiring
1.AC 100~240V Power connection.
2.Disconnect Power before operation. Use your home's circuit breaker
to switch off power.This protects you and your camera.
ATTENTION - CAUTION
Wire Nuts
Bracket
Bracket
screws

A.Fix the camera
B.Adjust the angle
C.Adjust the direction and fix the camera.
**Note
Install
A
B
C
Fix the Flight 1S to the bracket
The Wall
4

5

6

7
Icons
Enlarge the image full screen.
Turn on receiving audio.
Switch to Full HD resolution (SD is Standard Resolution).
Take a snapshot (it will be saved on your smartphone).
Activate smartphone microphone and speak through camera.
Record a part of a video (it will be saved on smartphone).
Play recorded video on SD card.
Access cloud recordings (extra service).
You can turn on/off lamp manually, with PIR detection or setting
a timer.
Use the siren as a deterrent for strangers.

- Wireless standard: 2.4Ghz WIFI
(IEEE802.11b/g/n)
- Channel bandwith: Support 20/40MHz
- Wifi security: WPA-PSK/WPA2-PSK
- Max transmission power : <13 dbm
Lamp
Lamp power: 12.5Wx2 lights
Color temperature: 6000K
Illumination: 2100 lm max
Lamp control: Manual/PIR detection/
schedule
PIR
Movement detection range: 12m
PIR angle: 120°
Storage slot
Storage: SD card (Max 128Gb), Cloud
(extra cost); Botton: Reset
Size
Dimensions: 260 x 140 x 132 mm
Net weight: 640g
Specifications and Wi-Fi standard
8
- Homcloud code: MA-WCF1S
- Model No.: Flight 1S
- Power supply: AC 100 - 240V
- Total power: 32W max
- Working Temp.:-20℃~50℃
- IP rating: IP65 (outdoor)
- Installation: Wall mounting with screws
Camera
- Image sensor: 1/2.9'' 2Mega CMOS
- Resolution: 1080p Full HD, 2 Mp
1920(H)*1080(V)
- IR distance: Automatic night visibility up
to 10m
- Lens: [email protected], 135° wide view angle
Video&Audio
- Compression: H.264
- Audio: Bi-directional built-in mic/speaker
- Siren alarm: 120dB
Network
- Communication protocol: TCP/IP,HTTP,
DHCP,DNS, RTSP

功能介绍Functions
Record
Using SD card or Opening the Cloud-Storage Service, to keep recording for
every moment.
Day & Night
Powerful night vision means no interruptions, even in complete darkness.
Daytime Night
Full-duplex audio
You can see and hear the vistor in your App from the camera.
PIR
When the camera detects someone stopping by, it sends an alarm message
to your cell phone.
Lighting control
You can turn the light on or off with time setting or PIR.
9

10

11

12

Imported by: Life365 Italy S.p.A. - European General Agency
Viale Roma 49/a, 47122 Forlì, Italy - Made in China
Hereby, Life365 Italy S.p.A. declares that this wireless device complies with
the essential requirements and other provisions correl of Directive
2014/53/EU of the European Parliament and of the Advice. The declaration
can be consulted on the website www.homcloud.com/doc.
"Homcloud" is a registered trademark of Life365 Italy S.p.A.
DECLARATION OF CONFORMITY
13