Home Art International WS-3201 User manual

Home Art International Ltd.
Instruction Manual of WS-3201 P.1 of 5
Home Art International Ltd
Splash Proof Wireless Speaker
WS-3201
Instruction Manual
Customer :
Revision : R1.0
Date : 12th -Jun-2010
Copyright © 2010 by Home Art International Ltd.
All right reserved. This document may not be copied, photo-copied, reproduced,
translated or reduced, in whole or part, in written form or to any electronic medium or
machine-readable form without prior permission of the manufacturer.
The manufacturer assumes no liability for errors or direct, indirect, special, incidental
or consequential damages in connection with the performance or use of this
equipment, manual or any related materials. The information in this document is
subject to change without notice.

Home Art International Ltd.
Instruction Manual of WS-3201 P.2 of 5
(1) Features :
ԦWireless transmitter transmits high quality audio from an audio source to the
wireless speakers, so you can listen to music in a different room from the audio
source.
ԦTransmitter can be connected to any MP3 / CD / Audio player
ԦWireless speaker with Splash Proof design
ԦWireless speaker with digital volume control
ԦHigh sound quality speaker with 3W output
ԦWorking distance up to 15m (50 feet)
ԦHidden antenna for both transmitter and wireless speaker
ԦOptional extendable antenna can be installed at transmitter to improve signal
reception
(2) Part Description :

Home Art International Ltd.
Instruction Manual of WS-3201 P.3 of 5
(3) Operation :
Battery Installation
For the wireless transmitter, remove the battery door on back to insert 4 AA-size
batteries. Make sure the polarity is correct. Then put back the battery door.
For the wireless speaker, Turn the knob of the battery door to UNLOCK position
and remove the battery door. Insert 4 AA-size batteries. Make sure the polarity is
correct. Then put back the battery door properly. Turn the knob to LOCK position.
Note : Battery life depends on frequency of use. For both transmitter and wireless
speaker, change the batteries if the power indicator becomes very dim or they do not
work properly (e.g. bad reception or speaker sound becomes weak).
Operation
1. Connect the 3.5mm audio plug of the transmitter to the audio player (e.g. MP3 / CD
player). Turn on both the audio player and the transmitter. The power indicator of
the transmitter will be turned on.
2. Turn on the wireless speaker. The power indicator will be turned on. Adjust the
volume using the VOL+ and VOL- buttons. If the volume is not loud enough, you
may need to increase the volume of the audio player output.
3. It may be necessary to move around the area and find the location for best reception
if interference occurs. Install the optional extendable antenna at the transmitter
(screw in clockwise) will improve the reception and increase the working distance.
4. Turn off both transmitter and wireless speaker when they are not in used in order to
save the battery life.
(4) Technical Specification :
Power : 4 x AA batteries for transmitter
4 x AA batteries for wireless speaker
Working distance : 15m (50 feet)
Operating Temperature : +10 to +40 degree C

Home Art International Ltd.
Instruction Manual of WS-3201 P.4 of 5
(5) Important Notes :
It may be necessary to move around the area and find the location for best
reception if interference occurs. Install the optional extendable antenna at the
transmitter (screw in clockwise) will improve the reception and increase the
working distance.
Do not use this product in places that are extremely hot, cold or humid.
(6) Battery Safety Information:
ԦNon-rechargeable batteries are not to be recharged.
ԦRechargeable batteries are to be removed from the device before being
charged.
ԦOnly batteries of the same to equivalent type as recommended are to be
used.
ԦBe sure to insert batteries as instructed.
ԦDo not mix old and new batteries.
ԦDo not mix alkaline, standard (carbon - zinc), or rechargeable (nickel -
cadmium) batteries.
ԦRemove weak or exhausted batteries.
ԦRemove batteries if base or beeper unit not be used for a long period.
ԦCheck the contact surfaces are clean before installing batteries.
ԦDispose of batteries safely.
ԦDo not dispose of batteries in fire, batteries may explode or leak.
ԦThe supply terminals must not be short circuited.
ԦAttention should be drawn to the environmental aspects of battery disposal.

Home Art International Ltd.
Instruction Manual of WS-3201 P.5 of 5
Statement of FCC Compliance
Caution : changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following
measures:
zReorient or relocate the receiving antenna.
zIncrease the separation between the equipment and the receiver.
zConnect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
zConsult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.