Home Styles The Orleans Storage Stand 88 5060 761 User manual

Part List (in this carton)
B.
Side Frame
1 pc.
C.
Side Frame
1 pc.
F.
Stretcher
1 pc.
Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
88 5060 761
The Orleans Storage Stand
For assembly see instructions in carton 88 5060 762

Hardware List
Hex Wrench
1 pc. Head Cap Bolt
(short)
12 pcs. (+1 extra)
Small
Hex Wrench
1 pc.
Part List (in this carton)
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
D.
Shelf
4 pcs.
E.
Support
4 pcs.
A.
Top
1 pc.
Spring Washer
20 pcs. (+1 extra)
Flat Washer
20 pcs. (+1 extra)
Head Cap Bolt
20 pcs. (+1 extra)
Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Also need the Parts in carton 88 5060 761
Wood Screw
12 pcs. (+1 extra)
88 5060 762
The Orleans Storage Stand

Assembly Instructions 2/3
STEP 2
Attach Shelves (D)
to unit with Flat Washers,
Spring Washers and
Head Cap Bolts.
STEP 1
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
Figure 1
Figure 2
Place Top (A) upside down on a soft cloth.
Attach Side Frame (B), (C) onto Top (A)
with Head Cap Bolts (short).
(See figure 1)
Attach Stretcher (F) to unit with
Flat Washers, Spring Washers and Head Cap Bolts.
(See figure 2)
B
C
F
A
Head Cap Bolt
(short)
D
D
D
D
Head Cap Bolt
Head Cap Bolt
Spring Washer
Spring Washer
Flat Washer
Flat Washer

Assembly Instructions 3/3
To level the unit, adjust the adjustable
levelers on the bottom of unit. (see Figure 3)
Note: Unit must be level to work properly.
(Figure 3)
STEP 3
Attach Supports (E)
to unit with Wood Screws.
Turn the unit over to its’ upright position.
STEP 4
E
E
E
E
Wood Screw