homechoice Buddy Co-sleeper & Camp Cot User manual

1
Buddy Co-sleeper & Camp Cot
Assembly Instruction
Shop online – go to
homechoice.co.za

2
General Warnings:
• To prevent possible injury by entanglement, remove the toy mobile when the child
starts trying to get up on his/her hands and knees in a crawling position.
• Keep all small parts and packaging materials for this product away from babies
and children, otherwise they may pose a choking hazard.
• The product must be installed and used under adult supervision.
• Please ensure that all parts are correctly installed. Incorrect installation
can lead to danger.
• Always place the product on a at, steady and stable surface.
• The cot should not be placed too close to other furniture or windows, blind cords,
curtain pulls or other strings as this could lead to strangulation.
Please read all instructions carefully and keep them for future reference.
Congratulations on your little one! As a cot or bed, this product is suitable for use for
children weighing up to 15kg or children aged 0-3 years old. Carefully read through this
manual and follow each step to ensure a safe experience for your child. Please keep the
instruction manual handy for future reference.

3
Important
To ensure safe operation of your co-sleeper, please follow these instructions and keep for
future reference.
Before assembly, inspect the product for damaged hardware, loose joints or missing
parts. Never use if any parts are missing or broken.
Never leave infant in product with sides down.
Infants can suocate in gaps between the mattress and the sides of the camp cot.
Ensure that the mattress is the correct size for your camp cot. You should not be able to t
more than 2 ngers between the sides of the camp cot and the sides of the mattress.
Please make sure that you have all the parts and hardware items listed before you start to
assemble.
Do not leave anything in the cot which could present a danger of suocation.

4
Please make sure that you have all the parts and hardware items listed before you start to assemble.
PARTS LIST:
Part
1Storage Rack 1 piece
2Tubes 6 pieces
3Changing Table 1 piece
4Mattress 1 piece
5Bed Body 1 piece
6Music & Toy Mobile 1 piece

5
Opening for use
Expand the 4 sides outwards.
Step 2
Unzip the travel bag and re-
move the frame and mattress.
Place the cot in the vertical
position and open the Velcro
straps to remove the mattress
Step 1
Lift the sides of the cot
upwards until they lock into
position. Check that all four
sides have engaged correctly.
Step 3

6
If you nd that something is missing, please do not assemble. Contact our Customer Service on 0861 466 324.
Connect the 6 tubes.
Step 5
Push the centre of the
cot base downwards until it
audibly locks into place.
Step 4
Place the mattress in the
travel cot with the padded
side up.
Step 6

7
Part
1Music switch
2Base
3Three toys
4Base bracket
5Splicer
6Toy Bar
PARTS LIST:

8
How to assemble music & toys rack
1. Attach toys to toy bar
4. Attach music switch
2. Connect splicer to base bracket
5. Attach toy bracket
3. Connect base bracket to base

9
How to assemble changing table
Attachment of co-sleeper to bed
If you nd that something is missing, please do not assemble. Contact our Customer Service on 0861 466 324.
Press down to attach to cotBack view
This shows height No.2
One side of the cot can be adjusted up & down to connect
with adult bed at 4 dierent heights.
When used in the co-sleeping position, the top edge of the
lowering rail must be level with, or below, the top of the adult
mattress.
1. Pull zipper down to the
height of No.1-No.4
2. Pull up plastic at both sides
to the height No.1-No.4
3. Roll up fabric & fasten it
with velcro

10
How to connect to adult bed
How to fold the camp cot/co-sleeper
To connect the cot to the adult bed and prevent possible injury to your baby, we strongly
suggest you follow as indicated below. Please ensure that brakes are engaged.
• Remove the changing table, music, toy rack, storage rack, mattress, etc before
folding. Only fold the camp cot.
• Lift the ring up at the bottom of the cot.
• Hold the folding switch in the middle of the handrail, press down & fold the two
long sides down to a V-shape, then press down & fold the two short sides down
to a V-shape.
• Have all sides together.

11
If you nd that something is missing, please do not assemble. Contact our Customer Service on 0861 466 324.
Please ensure that the cot is folded correctly by using the release buttons on the short
and long sides of the camp cot co-sleeper.

12