homechoice Lunar User manual

1
Lunar Cot
Assembly Instruction
Shop online – go to
homechoice.co.za

2
Warnings:
Important
• To ensure safe operation of your cot, please follow these instructions and keep for
future reference.
• This cot is intended for Children weighing up to 15kgs.
• Before assembly, inspect the product for damaged hardware, loose joints or
missing parts.
• Never use if any parts are missing or broken.
• Only use the cot after it has been fully assembled according to the guidelines in the
Instruction Manual.
• For Cots with Adjustable height: The lowest position is the safest and the base must
always be used in that position as soon as the baby is old enough to sit.
• Infants can suocate in gaps between the mattress and sides of the cot.
• Ensure that the mattress is the correct size for your cot, you should not be able to
t more than 2 ngers between the sides of the cot and sides of the mattress.
• Do not leave anything in the cot which could present a danger of suocation.
• This product should not be placed too close to other furniture or windows, blind
cords, curtain pulls or other strings as this could lead to strangulation.
If you nd that something is missing, please do not assemble. Contact our Customer Service on 0861 466 324.

3
Please make sure that you have all the parts and hardware items listed before you start to assemble.
TABLE OF CONTENTS:
Part
1Dowel 8x30 8 piece
28x35mm screw 6 piece
3Waer screw 12 piece
4Allen key 4mm 1 piece
Please follow these guidelines for safe assembly:
Please make sure that you have all the parts and hardware items listed before you start
assembling your product. If you nd that something is missing, please do not assemble.
Contact our Customer Service on 0861 466 324.
HomeChoice will not be held liable for damages caused by improper assembly.

4
Step 2
Step 1
If you nd that something is missing, please do not assemble. Contact our Customer Service on 0861 466 324.
hhaarrddwwaarree
X 8
X 8
Dowel 8x30
W
Allen key 4mm X 1
hhaarrddwwaarree
X 4
W
Step 3
8x35mm Screw
hhaarrddwwaarree
X 6
Insert dowels and waer screws into the top and
bottom slots provided in the sides of the cot. The
waer screws will need to be tightened with the
allen key provided
Place slats inside the cot and
attach it to short sides using
waer screws.
Place base board on top of
slats and fasten it by using
your 8x35mm screws.