Honeywell 315-508 User manual

Fire Panel Commissioning
Bluetooth Dongle
Honeywell Bluetooth USB Dongle is an elegant Bluetooth
Low Energy (BLE) product that is used for seamlessly
interfacing with the Morley STX and SMX fire panel models.
The Honeywell Bluetooth Dongle (HONBLEKIT2)
is a plug and play module that enables wireless
communication between the panel and the Honeywell
SmartConfig™ mobile application for simple, smart and
secure commissioning and maintenance operations.
The HONBLEKIT2 is compatible with
SmartConfig version 2.0.0.0 onwards.
Honeywell Bluetooth Dongle Specification:
CONTAINS BLUETOOTH 4.0 QUALIFIED SINGLE-MODE MODULE
VBUS -0.3 to 6.5 V
Operating Temperature Range -40 to +85°C
TX current consumption (radio only, 0dBm) 12.1 mA
RX current consumption (Radio only) 33 mA
TX output power 44 mA
Approvals/ Certifications WPC, FCC
Honeywell Bluetooth Dongle (HONBLEKIT2)
FCC Statement:
Contains FCC ID: QOQBLED112
This HONBLEKIT2 complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
• This device may not cause harmful interference
• This device must accept any interference received
CAUTION: Changes or modifications not expressly
approved by the manufacturer could void the
authority of the user to operate the equipment.
315-508
FEATURES:
Following are the features of Honeywell wireless commissioning:
• Provides seamless wireless low power Bluetooth Connectivity to Morley STX and SMX fire panel models
• Eases the panel commissioning and maintenance operations through Honeywell SmartConfig™ Mobile app
• Enables productivity through a simple interface
• Eliminates the need to carry laptops, cables and so on to the site for configuration

FPC Bluetooth Dongle DS | Rev 01 | 08/19
© 2019 Honeywell International Inc.
Honeywell Building Technologies ASEAN
Level 25, UOA Corp Tower B, Avenue 10
The Vertical, Bangsar South City
59200, Kuala Lumpur, Malaysia
Email: [e-mail]
Honeywell Building Technologies India
Unitech Trade Centre, 5th Floor
Sector – 43, Block C, Sushant Lok Phase – 1
Gurgaon – 122002, Haryana, India
Email: HoneywellSecurity&[e-mail]
Toll Free: 18001030339
www.honeywell.com
For more information
www.morley-ias.co.uk
Honeywell Building Technologies META
Emaar Business Park, Building 2, 2nd Floor
Sheikh Zayed Road
P.O.Box 232362, Dubai, U.A.E.
Phone: [phone]
How to connect the Honeywell Bluetooth USB Dongle to the fire panel?
How to connect via Bluetooth to program the fire panel?
For more details on programing the fire panel via Bluetooth, refer to one or more of the following resources as required:
1. FAQ from within the SmartConfig™ mobile app.
2. SmartConfig™ PC Application User’s Guide (NSMS0020)
3. STX SMX Programming Guide (NSMN0017)
Product Line Information
315-508: BLE Dongle for Wireless Commissioning
Launch the Honeywell Morley-IAS
SmartConfig™ mobile application.
Establish a bluetooth connectivity
between mobile application and
Fire Alarm Control panel.
Configure the Fire Alarm Control
Panel using™ Quickwizard.
Voila! The Fire Alarm Control
Panel is configured.
234
SMART
C
ONFIG
1
1. Open the fire panel’s front door.
2. Look for the “USB 1” on the top
behind the display board.
3. Plug the USB dongle into
the “USB 1” port.
1. Ensure that the Honeywell Bluetooth USB Dongle is connected to the fire panel.
2. On the panel, tap Commissioning from the Main Menu.
3. Tap next to Configuration via Bluetooth.
4. On the mobile, switch-on the Bluetooth and discover, select the HONBLEKIT2 connection.
5. Enter the pass-code that appears on the panel screen into your mobile device.
6. The Bluetooth icon gets activated on the panel screen as soon as the panel is paired with the mobile device.
7. Now you can send the configuration from mobile to the panel or read from the panel, as required.