Hotline 47HMI2500 User manual

12v
12v
1
9
4
5
7
8
12
6
11
2
10
3
1. Dual earth terminals
2. Live output terminal
3. Fence return terminal (voltage monitor)
4. LED fence performance monitor
5. Battery back up charge monitor
6. LCD display
7. On/o󰀨 and menu buttons
8. Power input socket
9. External alarm input
10. 12v battery back-up input
11. 230v power supply
12. Battery back-up 12v leads.
Key
What’s in the box? Getting to know your energiser
Please read through before installation. Please read safety guidelines booklet.
Installation guide - 47HMI2500

12v
Connecting it all together
Insert the socket from the the 230v power
supply into the power input socket on the
rear of the energiser. Mount the energiser on
an indoor wall or in a weatherproof location.
If using, battery back up leads can also
be connected prior to wall mounting. Plug
the adaptor into the mains socket which
should be turned o󰀨 until the installation is
complete.
Insert su󰀩cient lengths of single core HT lead/under gate cable into the live and earth
terminals and tighten securely. You can use either or both of the earth terminals. The blue
terminal is for monitoring return voltage and. If using, connect your 12v back up battery
to the croc clips on the back up battery. We recommend a 12v leisure battery of minimum
70Ah. Optional external alarm sounder (part. 47SS1) can also be connected.
Input connection
External connection
12v
12v
8
12
11

12v
Connect the lead from the live terminal to the fence line using a connector best suited to
your type of fence (tape/rope/wire). We recommend a minimum of two earth stakes are
used with higher power mains installations. Both earth terminals can be used or a second
earth stake can be connected directly to the rst earth stake. Earth stakes should be
situated at least 10m from a building and preferably at a minimum depth of 1m. The blue
fence return terminal can be connected to the
Fence connection
Turning on
Connection to the fence
When connected to a power supply the LCD screen will read ‘Stand-by’. Pressing the
lower button will turn the energiser on. The screen will display ‘On’ and alarm setting
status (LV - Low voltage/FR - Fence return) for a short period, before showing fence
voltage (bottom left) and if connected, fence return voltage.
The LED bar will ash in time with the pulse with the colour indicating the level of voltage
on the fence. Each light represents approximately 1kv. Red lights indicate the voltage
level is below what is deemed to be e󰀨ective. The single LED on the right will show the
charge level of the back up battery, if connected. It will display red if no battery is
connected.
12v
ROC 2500
ON
ROC 2500
Low voltage
STANDBY
RV N/A
BB 12.2V
ALARMS: OFF
9.5KV
BOOST
5 SECONDS
4 014803 157775
ROC 2500
ON
ROC 2500
Low voltage
STANDBY
RV N/A
BB 12.2V
ALARMS: OFF
9.5KV
BOOST
5 SECONDS
4 014803 157775

Register your warranty is to register online at www.hotline-fencing.co.uk Click on the warranty tab and enter
the required details.
Terms and Conditions
The 5 Year Warranty meets energiser repair costs due to electrical or electronic breakdown during the 5-year period. If the energiser develops a fault within the first 12 months we offer
a 12 month swap out warranty. For the remaining period of warranty, we will repair the energiser. If the energiser cannot be repaired or is deemed not cost effective to repair, we will offer
a replacement. Rechargeable batteries supplied as an integral part of the energiser are covered by a reduced warranty period of 1-year. The product must be registered with Hotline-
horizont Ltd or with a dealer authorised to register a product within 28 days of the purchase date. You can register online at www.hotline-fencing.co.uk
What is covered?
All electrical and electronic components of the product that were the manufacturers’ original fitment.
What is not covered?
Theft, accidental or deliberate damage, misuse, neglect or consequential loss. Wear and tear or gradually developing defects, cracks, flaws, fractures or faults not affecting the operational
function of the product. Failure as a result of operational error or incorrect or faulty installation. Failure due to lightning strikes or from flooding. Failure due to the use of non-approved
components or accessories or failure to observe the manufacturer’s instructions. Any repair, modification, disassembly or parts replacement completed without the prior authority of
Hotline-horizont Ltd will render the warranty void.
General
The customer MUST register their product with Hotline-horizont or authorised dealer to obtain the guarantee. Proof of original purchase may be required in the event of a claim. The
original serial number label must be present on the energiser when returned. The customer shall take all reasonable steps to ensure that the energiser is operated in accordance with the
manufacturers’ recommendations.
Claims Procedure
We advise that customers retain the original packaging and carton box. If you wish to return the energiser under warranty (or for repairs and service outside of the warranty period), please
visit the our website to obtain a returns number, or contact us to request a returns number, prior to sending. Clearly write the returns number on the outer packaging to allow us to identify
the contents and the action required. Failure to clearly state the returns number may result in a delay in returning your energiser.
Hotline-horizont Ltd
Roundhead Rd
Newton Abbot TQ12 6RE
[phone]
[email protected]
www.hotline-fencing.co.uk
12v
If the energiser is not maintaining e󰀨ective fence voltage in
normal power mode, it will enter boost mode. If a sudden load
causes a decrease in voltage, boost mode will follow a time
delay safety sequence, before entering permanent boost. This
will be indicated by the blue LED and internal alarm.
There are two alarms - low voltage and return
voltage - each with three voltage levels.
Place the energiser into standby by pressing
the bottom button. The top button will cycle through
the alarm options, beginning with the three low
voltage options followed by the three return voltage
options. When the required alarm setting is displayed,
press the bottom button to set the alarm and start
the energiser. The LCD display will show the alarm
settings before reverting to the normal operation
screen. Repeat the sequence to set another alarm or
change the alarm voltage levels. Alarms will re set if
the energiser is disconnected from the power source.
SUDDEN
HEAVY LOAD
45 SECONDS 45 SECONDS
6 SECONDS 45 MINUTES
DELAY DELAY
ALARM SAFE BOOST & ALARM BOOST
!
Boost and time delay
Time delay sequence
Setting alarms ROC 2500
Alarm: LV 2.5KV
Alarm: LV 2.5KV
Alarm: LV 3.5KV
Alarm: LV 4.5KV
Alarm: FR 2.5KV
Alarm: FR 3.5KV
Alarm: FR 4.5KV
Alarm: LV 4.5KV SET
ON
STANDBY
ALARM: LV 4.5KV
ON
ROC 2500
RV N/A
9.5KV