Hotpoint VLSR1090GWW Manual

VLSR1090G– Hotpoint 3.2 Cu. Ft. Super Capacity Washer
Specification Created 11/06
Washer Dimensions (in inches)
36
25-1/2
42
51
Side View
27
Rear View
36 42
27
23-1/2
2-1/2
25-1/2*
Side View Rear View
8-1/2
25-3/4
23-1/2
11-1/2
*24-1/2" from the edge of the side panel to the front.�
25-1/2" from front to edge of endcaps.
Washer/Dryers SC QSart
Circuit Requirements: An individual, properly-grounded branch circuit,
with a three-prong grounding-type receptacle, protected by a 15 or
20 amp circuit breaker or a time-delay fuse, is required.
Electrical Rating: 115V, 60Hz, 10 Amps
Installation Information: Before installing, consult installation
instructions packed with product for current dimensional data.
Washer Note: Washer wall outlet must be located within 36" of
service cord entry. Wall outlet must not be located behind dryer.
Listed by
Underwriters
Laboratories

Specification Created 11/06
VLSR1090G – Hotpoint 3.2 Cu. Ft. Super Capacity Washer
VLSR1090G
Features and Benefits
• 3.2 Cu. Ft. Super PermaTuf®II Wash Basket - Designed to maintain a long-lasting stain-free
appearance with bright white interior
• One Wash/Spin Speed Combinations - Matches wash action to fabric type for better
cleaning and clothes care results
• Nine Wash Cycles - Convenient settings for everyday fabrics
• Three Wash/Rinse Temperatures - Offer better wash results and longer fabric life
• Three Water Levels - Minimize water waste
• FlexCare™Agitator - Provides gentle, yet effective washing action
• Rotary Electromechanical Controls - Allow fast, easy cycle selection
• Spin Only - "Spin-dries" wet clothes like beach towels and swimsuits
• Quiet-By-Design™- Engineered for quiet operation
• Model VLSR1090GWW – White on white