battery into the charger directly.
(3) Battery charging time (estimated)
In the normal environment, it takes 3 hours to be fully
charged.
(4) Continuous working hours (estimated)
When [system] is set to photo mode and all other settings
are factory default settings, it can work for 1.5 hours.
When [system] is set to video mode and other resolutions,
and all other settings are factory default settings, it can work
for 1.5 hours.
Note: The battery is recommended to start charging in a
temperature range of 10 ° C to 30 ° C. In a lower
temperature, the battery may not be able to or need more
time to be fully charged. When charging in a high
temperature, it may shorten battery life.
The fully charged battery will naturally consume electricity. In
order to ensure sufficient power, charging in advance is
recommended.
When the camera is not used for a long time, please charge
the battery every 3 months. Then let the battery discharge to
maintain the battery life.
Install / remove memory card
The camera supports Micro SD card, must use class 10 card,
the highest support 256GB.
insert Micro SD card with label up into card slot at bottom of
the camera until it clicks to confirm that the installation is in
place. Press memory card will pop up automatically if press it
