Huawei IPC6125-WDL-FA User manual

IPC6125-WDL-FA
Configuration Guide
Issue 01
Date 2016-08-20
HUAWEI TECHNOLOGIES CO., LTD.

Copyright © Huawei Technologies Co., Ltd. 2016. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: [email protected]
Issue 01 (2016-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
i

Contents
1 Login and Logout...........................................................................................................................1
1.1 Logging In to the Web Client......................................................................................................................................... 2
1.2 Logging Out of the Web Client...................................................................................................................................... 5
2 IPC Web Page Introduction......................................................................................................... 6
3 Setting Basic Parameters.............................................................................................................. 9
3.1 Setting IP Address Parameters..................................................................................................................................... 10
3.2 Setting platform Connection Parameters...................................................................................................................... 11
3.2.1 Setting Parameters for an SDK-based Connection....................................................................................................12
3.2.2 Setting Parameters for a GB/T 28181-based Connection..........................................................................................17
3.2.3 Setting Parameters for an ONVIF-based Connection................................................................................................19
3.2.4 Setting Parameters for a GENETEC-based Connection............................................................................................22
3.3 Setting OSD Parameters............................................................................................................................................... 26
3.4 Setting Time Parameters...............................................................................................................................................28
3.5 Selecting a Stream Package..........................................................................................................................................31
3.6 Selecting an ISP Package............................................................................................................................................. 33
3.7 Configuring an ISP Package Plan.................................................................................................................................35
3.8 Replacing the Certificate.............................................................................................................................................. 36
4 Live Video Viewing.................................................................................................................... 39
5 PTZ Control.................................................................................................................................. 41
6 Setting Video Parameters...........................................................................................................43
6.1 Setting Video and Audio Stream Parameters................................................................................................................45
6.1.1 Setting Video Stream Parameters.............................................................................................................................. 45
6.1.2 Setting Audio Stream Parameters..............................................................................................................................49
6.2 Configuring a Stream Package..................................................................................................................................... 51
6.3 Setting ISP Parameters................................................................................................................................................. 53
6.4 Configuring an ISP Package.........................................................................................................................................61
6.5 Setting Area Metering.................................................................................................................................................. 62
6.6 Setting ROI Parameters................................................................................................................................................ 64
6.7 Setting the Focusing Region.........................................................................................................................................65
6.8 Setting Image Overlay.................................................................................................................................................. 66
6.9 Setting Privacy Mask Parameters................................................................................................................................. 67
IPC6125-WDL-FA
Configuration Guide Contents
Issue 01 (2016-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ii

6.10 Setting Motion Detection Parameters.........................................................................................................................68
6.11 Setting SEC Parameters.............................................................................................................................................. 69
6.12 Adjusting the BFL...................................................................................................................................................... 70
7 Setting Network Parameters......................................................................................................72
7.1 Setting Basic Network Parameters............................................................................................................................... 74
7.1.1 Setting MTU Parameters........................................................................................................................................... 74
7.1.2 Setting QoS Parameters............................................................................................................................................. 74
7.1.3 Setting Attack Defense Parameters........................................................................................................................... 75
7.1.4 Setting Multicast Parameters..................................................................................................................................... 76
7.2 Setting IP Filter Parameters..........................................................................................................................................76
7.3 Setting Traffic Shaping Parameters.............................................................................................................................. 78
7.4 Setting Bandwidth Adaptive Parameters......................................................................................................................79
7.5 Setting 802.1X Parameters........................................................................................................................................... 79
7.6 Configuring the 802.1X Certificate.............................................................................................................................. 81
7.7 Setting SNMP Parameters............................................................................................................................................ 82
7.7.1 Set SNMP v1/v2c parameters....................................................................................................................................82
7.7.2 Set SNMP Event Trap Parameters.............................................................................................................................83
7.7.3 Configuring SNMP v3 User Information.................................................................................................................. 86
7.8 Setting DDNS Parameters............................................................................................................................................ 88
7.9 Setting Port Parameters................................................................................................................................................ 89
7.10 Setting Port Mapping..................................................................................................................................................89
7.11 Setting Intelligent TCP Acceleration..........................................................................................................................90
8 Setting PTZ Control Parameters............................................................................................... 91
8.1 Setting PTZ and Serial Port Parameters....................................................................................................................... 92
8.1.1 Setting Serial Port Parameters................................................................................................................................... 92
8.1.2 Setting Transparent Channel Parameters...................................................................................................................93
8.1.3 Setting PTZ Parameters............................................................................................................................................. 94
8.2 Setting Preset Position Parameters............................................................................................................................... 95
8.3 Setting Tour Track Parameters..................................................................................................................................... 97
8.4 Setting Home Position Parameters............................................................................................................................... 99
9 Setting Intelligent Analysis Parameters............................................................................... 101
9.1 Configuring the Intrusion Detection Function............................................................................................................102
9.2 Configuring the Loitering Detection Function........................................................................................................... 108
9.3 Configuring the Abandoned Object Detection Function............................................................................................ 115
9.4 Configuring the Removed Object Detection Function............................................................................................... 122
9.5 Configuring the Tripwire Detection Function............................................................................................................ 129
9.6 Configuring the Video Block Detection Function......................................................................................................136
10 Setting Alarm Parameters...................................................................................................... 138
10.1 Setting Alarm Input and Output Parameters.............................................................................................................139
10.2 Setting Temperature Alarm Parameters....................................................................................................................140
10.3 Setting Alarm Deployment Policy Parameters.........................................................................................................140
IPC6125-WDL-FA
Configuration Guide Contents
Issue 01 (2016-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
iii

10.4 Setting Alarm Linkage Policy Parameters................................................................................................................143
11 Setting Video............................................................................................................................145
11.1 Managing Video........................................................................................................................................................146
11.2 Setting the Recording Plan....................................................................................................................................... 147
11.3 Playing Back Recordings..........................................................................................................................................148
12 Configuring the Snapshot......................................................................................................150
12.1 Configuring the SD Card Space............................................................................................................................... 151
12.2 Setting Image Quality...............................................................................................................................................151
12.3 Configuring Scheduled Snapshot............................................................................................................................. 152
12.4 Configuring Snapshot Upload.................................................................................................................................. 153
13 Querying Logs..........................................................................................................................156
14 Managing the System............................................................................................................. 158
14.1 Managing Users........................................................................................................................................................160
14.1.1 Adding a User........................................................................................................................................................160
14.1.2 Changing the User Password.................................................................................................................................161
14.1.3 Changing the Maximum Number of Multipoint Logins....................................................................................... 162
14.1.4 Deleting a User...................................................................................................................................................... 162
14.1.5 Configuring Account Locking and Unlocking...................................................................................................... 163
14.1.6 Checking User Connection Status......................................................................................................................... 164
14.2 Managing the Configuration File............................................................................................................................. 164
14.3 Configuring the Web Login Protocol....................................................................................................................... 165
14.4 Managing the Storage Device...................................................................................................................................166
14.5 Setting Local Parameters.......................................................................................................................................... 168
14.6 Viewing System Information....................................................................................................................................170
14.7 Viewing Process Information................................................................................................................................... 171
14.8 Viewing Media Stream Parameters.......................................................................................................................... 172
14.9 Upgrading the IPC.................................................................................................................................................... 173
14.10 Restarting the IPC...................................................................................................................................................175
14.11 Restoring the IPC to Factory Settings.....................................................................................................................175
14.12 Collecting Information........................................................................................................................................... 176
15 Appendix...................................................................................................................................178
15.1 Troubleshooting........................................................................................................................................................ 179
15.1.1 An IPC Fails to Upgrade....................................................................................................................................... 179
15.1.2 Cannot Find Related Files In The Storage Paths After Snapshots Are Taken and Video Is Recorded On Web
Pages.................................................................................................................................................................................179
15.1.3 The Snapshot and Video Recording Functions Fail To Be Implemented On Web Pages..................................... 180
15.1.4 Cannot Play Video After Logging In To The Preview Page.................................................................................180
15.1.5 The File Path Is Incorrectly Displayed.................................................................................................................. 181
15.1.6 There Is a Problem With This Website's Security Certificate............................................................................... 181
15.1.7 Users Are Unable To View Live Video On The Wweb page, With a Message Displayed, Indicating That an Error
Occurs On The ActiveX Control...................................................................................................................................... 181
IPC6125-WDL-FA
Configuration Guide Contents
Issue 01 (2016-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
iv

15.1.8 The HTTPS Web Page Cannot be Displayed On Internet Explorer......................................................................182
15.1.9 Cannot Open The Device Web Page After Setting The Web Server Protocol To HTTPS................................... 182
15.1.10 Blank Screen Occurs........................................................................................................................................... 183
15.1.11 The IPC Online Help Information Cannot be Viewed On The Web Client.........................................................183
15.1.12 The IPC Online Help Information Cannot be Viewed Fully On The Web Client............................................... 183
15.1.13 Cannot Expand Or Collapse Other Directories When Expanding a Level-2 Directory On The Navigation Tree of
The IPC Online Help........................................................................................................................................................ 184
15.1.14 The Searching Function Of The IPC Online Help Is Disabled........................................................................... 184
15.1.15 Some Characters Will Be Displayed As Question Masks (?) When Logging In To The Web Client Of The
Chinese Version In The Window Opera........................................................................................................................... 185
15.1.16 Some Characters Will Be Displayed As Question Masks (?) When Logging In To The Web Client Of The
Korean Version In The Window Operating System Of The Chinese Version..................................................................185
15.1.17 Cannot Enter Time In The Input Box For Setting Time On Web Pages............................................................. 186
15.1.18 The Page Cannot Switch Automatically When The Default Setting Is Restored If The IPC Uses The HTTP
Protocol.............................................................................................................................................................................186
15.1.19 The Player Control Fails To Install After Upgrading Successfully On Windows 8 of 64-bit Operating System
.......................................................................................................................................................................................... 186
15.1.20 Information Can Be Collected By One Click Only After The System Displays The Window That Prompts You
To Download Files and Jumps To The Live Video Feed Page.........................................................................................187
15.1.21 The User Is Prompted To Install The Plug-in Even When The Plug-in Has Been Installed and The User Cannot
View Live Video...............................................................................................................................................................187
15.1.22 Discontinuity Occurs When Objects Move In The Live Video...........................................................................187
15.1.23 After You Click The PTZ Rotation, Zoom, Or Focus Button, The PTZ Rotation, Zoom, Or Focus Does Not
Stop...................................................................................................................................................................................188
15.1.24 The Screen Is Frozen After a User Logs In To The Web Client Using a Firefox Browser In The 40.0.2 Version
.......................................................................................................................................................................................... 188
15.1.25 The Screen Is Frozen and The Web Client Does Not Respond When The User Logs In To The Web Client
Using Internet Explorer In The 11.0.9600.16428IS Version For The First Time.............................................................188
15.1.26 Logs Fail To Be Downloaded When a User Clicks The Download All Logs Button On The Web Client........191
15.1.27 Failure To Enter The Full-Screen Mode Upon The First Double-Click When Viewing Live Video On The
Preview Tab Page............................................................................................................................................................. 192
15.1.28 The Button Is Blue After Functions In The Live Video Preview Window Are Exited.......................................192
15.1.29 Users Are Unable To View Live Video .............................................................................................................. 192
15.1.30 Live Video Image Artifacts Occur and The CPU Usage Reaches 100%............................................................ 192
15.1.31 When a User Uploads The IPC Certificate File,Configuration File And 802.1x Configuration File Using HTTP
On The Firefox Browser, The Message "Uploading...Do not perform any other operations" Is Always Displayed.......193
15.1.32 The Frame Rate Displayed On The Web Live Video Preview Page Is Unstable................................................ 193
15.1.33 The Image Border Slightly Blinks During Live Video Viewing Using a Firefox Browser................................ 194
15.1.34 When You Log In To The Device In HTTP Mode, Set The Password, And Click Save, The Page Does Not
Respond Or Keeps Displays The "Setting" Message....................................................................................................... 194
15.2 Downloading and Installing a Root Certificate........................................................................................................ 194
IPC6125-WDL-FA
Configuration Guide Contents
Issue 01 (2016-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
v

1 Login and Logout
About This Chapter
You can login or logout the IPC web client using a web browser.
1.1 Logging In to the Web Client
You can log in to the IPC web client using a web browser. Internet Explorer 8 is used here as
an example.
1.2 Logging Out of the Web Client
You can log out of the IPC web client using a web browser.
IPC6125-WDL-FA
Configuration Guide 1 Login and Logout
Issue 01 (2016-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1

1.1 Logging In to the Web Client
You can log in to the IPC web client using a web browser. Internet Explorer 8 is used here as
an example.
Software and Hardware Requirements
The minimum PC configuration,see Table 1-1.
Table 1-1 Software and Hardware Requirements
PC configuration Requirement
CPU Intel second-generation Core i5, with a
clock speed of 3.2 GHz or above
NOTE
If the live video bit rate reaches 16 Mbit/s or
more, use Intel fourth-generation Core i7, with a
clock speed of 3.6 GHz or above.
Video RAM 1.0 GB or above
Memory 3.0 GB DDR3 1600 MHz or above
NOTE
If the live video bit rate reaches 16 Mbit/s or
more, use 8.0 GB DDR3 1600 MHz or above.
Network adapter 100 MB or above
Hard disk 300 GB or greater
Monitor 22" or above
Systems and 32-bit browsers lWindows 7: Internet Explorer 8/9/10/11,
Chrome 32-44, FireFox 35+
lWindows 8: Internet Explorer 10/11,
Chrome 32-44, FireFox 35+
Prerequisites
lThe PC where the IPC web client is installed is on the same network segment as the IPC.
lTo ensure proper video effect, set the screen resolution to a value ranging from 1024 x
768 to 1920 x 1200.
lUse the administrator account to log in to the operating system to avoid control
installation failure. If the control fails to be installed, you cannot view live video.
lYou have set your Internet Explorer browser at your first login. For details about how to
set your Internet Explorer browser, see Table 1-2.
IPC6125-WDL-FA
Configuration Guide 1 Login and Logout
Issue 01 (2016-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2

Table 1-2 Web browser settings
Task Action
Disable the proxy. 1. Choose Tools > Internet Options.
The Internet Options dialog box is
displayed.
2. Click the Connections tab.
3. Click LAN Setting.
4. Deselect Use a proxy for your LAN.
5. Click OK.
Set the ActiveX controls and plug-ins. 1. Choose Tools > Internet Options.
The Internet Options dialog box is
displayed.
2. Click the Security tab.
3. Click Internet.
4. Click Custom level.
The Security Settings-Internet Zone
dialog box is displayed.
5. Set Automatic prompting for
ActiveX controls to Enable, and set
Download unsigned ActiveX
controls and Initialize and script
ActiveX controls not marked as safe
for scripting to Prompt.
6. Click OK.
Enable TLS 1.0 or TLS 1.1.NOTE
You must enable TLS 1.0 or TLS 1.1 when
the Hypertext Transfer Protocol Secure
(HTTPS) protocol is used to access the IPC.
1. Choose Tools > Internet Options.
The Internet Options dialog box is
displayed.
2. Click the Advanced tab.
3. Select Use TLS 1.0 or Use TLS 1.1.
4. Click OK.
Set Use Pop-up Blocker to Disable. 1. Choose Tools > Internet Options.
The Internet Options dialog box is
displayed.
2. Click the Security tab.
3. Click Internet.
4. Click Custom level.
The Security Settings-Internet Zone
dialog box is displayed.
5. Set Use Pop-up Blocker to Disable.
6. Click OK.
IPC6125-WDL-FA
Configuration Guide 1 Login and Logout
Issue 01 (2016-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3

Procedure
Step 1 Open Internet Explorer, enter the IPC IP address (192.168.0.120 by default) in the address
box, and press Enter.
The login page is displayed, as shown in Figure 1-1.
Figure 1-1 Login page
NOTE
lIf Internet Explorer displays a security warning There is a problem with this website's security
certificate, click Continue to this website (not recommended) to access the login page. To avoid this
security warning, download and install the root certificate. For details, see 15.2 Downloading and
Installing a Root Certificate.
lWhen the IPC automatically obtains its IP address from a Dynamic Host Configuration Protocol (DHCP)
server, the IP address it obtained will change dynamically. You can query and obtain the exact camera IP
address on the video surveillance platform.
Step 2 Enter the user name and password.
IPC6125-WDL-FA
Configuration Guide 1 Login and Logout
Issue 01 (2016-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4

NOTE
lThe default user name is admin and the default password is HuaWei123.
lYou can change the Graphical User Interface (GUI) language on the login page.
lBy default, if you entered incorrect passwords for five consecutive times, your account will be locked for
five minutes. To change the maximum number of consecutive incorrect password attempts, see 14.1.5
Configuring Account Locking and Unlocking.
lTo avoid security risks, click in the upper right corner of the main page, and change the password.
Step 3 Click Login.
The main page is displayed.
NOTE
lAt your first login to the IPC web client, the system automatically installs the player control. You can
view live video after installing the player control. If the browser stops control running, perform the
operations as prompted.
lIf you are not on the preview page or not viewing live video and do not perform any operations for more
than 10 minutes, the system automatically logs you out.
lTo view the IPC Online Help, click in the upper right corner of the main page.
----End
1.2 Logging Out of the Web Client
You can log out of the IPC web client using a web browser.
Procedure
Step 1 Click Logout in the upper right corner of the main page.
A confirm dialog box is displayed.
Step 2 Click OK.
The login page is displayed.
----End
IPC6125-WDL-FA
Configuration Guide 1 Login and Logout
Issue 01 (2016-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5

2 IPC Web Page Introduction
On the IPC web client, you can perform tasks such as viewing video, performing pan-tilt-
zoom (PTZ) control, configuring and maintaining the IPC, and querying logs.
Figure 2-1 illustrates the main page of the IPC web client. Table 2-1 describes the main page
layout. Table 2-2 describes the operations you can perform on the main page.
Figure 2-1 Main page
Table 2-1 Main page description
No. Name Description
1 Menu bar Includes Preview, Playback, Settings, Logs, Device model,
SW-V(Software Vision), Current user, Change password,
Logout, and IPC Online Help menus.
IPC6125-WDL-FA
Configuration Guide 2 IPC Web Page Introduction
Issue 01 (2016-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6

No. Name Description
2 Control panel Enables you to control the IPC, including controlling PTZ
rotation directions and speeds, invoking a preset position,
and enabling or disabling a tour track.
3 Video pane Enables you to perform a variety of tasks, for example,
viewing video, taking snapshots, and enabling local
recording, and view the encoding protocol, frame rate,
resolution, bit rate, and packet loss rate of the live video.
NOTE
On the lower portion of the live video pane, you can see the current
bit rate. This bit rate is the bit rate of the encoded data stream, but
not the transmission bit rate. The transmission bit rate is 5% higher
than the current bit rate.
Table 2-2 Operation description
Task Description
Control PTZ rotation directions and speeds,
and adjust the aperture and focal length.
Select a stream type.
Invoke a preset position.
IPC6125-WDL-FA
Configuration Guide 2 IPC Web Page Introduction
Issue 01 (2016-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7

Task Description
Start or stop a tour track.
Set the brightness, hue, saturation, contrast,
and sharpness.
NOTE
To restore default ISP values, click .
IPC6125-WDL-FA
Configuration Guide 2 IPC Web Page Introduction
Issue 01 (2016-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8

3 Setting Basic Parameters
About This Chapter
By setting basic parameters, you can quickly perform basic configurations on the device.
3.1 Setting IP Address Parameters
You can set IP address parameters for a camera when connecting the camera to a platform for
the first time or for changing the IP address of the camera.
3.2 Setting platform Connection Parameters
IPCs can register with the video surveillance platform using GB/T 28181, SDK, ONVIF, or
GENETEC to view live video viewing, set parameters, and control the PTZ.
3.3 Setting OSD Parameters
By setting on screen display (OSD) parameters, you can determine whether to display a text
on the screen or what text is displayed.
3.4 Setting Time Parameters
You can set the time zone and calibrate the camera time. You can directly set the camera time
or set Network Time Protocol (NTP) parameters to time-synchronize the camera with the
NTP server in the network.Also if DST(Daylight saving time) is configured, the system will
automatically perform time offset based on the predefined offset after entering the DST.
3.5 Selecting a Stream Package
A stream package is a collection of predefined configurations of video and audio stream
parameters. By configuring and invoking a stream package, you can quickly utilize predefined
video and audio stream configurations.
3.6 Selecting an ISP Package
By configuring and invoking an ISP package, you can quickly utilize configurations of the
ISP package.
3.7 Configuring an ISP Package Plan
You can configure a daily or yearly plan for scheduled tasks of ISP packages.
3.8 Replacing the Certificate
By managing the certificate of an IPC, you can manage the HTTPS protocol. Users are
advised to use their own certificates to ensure security.
IPC6125-WDL-FA
Configuration Guide 3 Setting Basic Parameters
Issue 01 (2016-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9

3.1 Setting IP Address Parameters
You can set IP address parameters for a camera when connecting the camera to a platform for
the first time or for changing the IP address of the camera.
Procedure
Step 1 Choose Settings > Network Configuration > Network Parameters.
The page for Network Parameters is displayed.
Step 2 Set IP address parameters. For detailed parameter description, see Table 3-1.
Figure 3-1 Network Parameters tab page
IPC6125-WDL-FA
Configuration Guide 3 Setting Basic Parameters
Issue 01 (2016-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10

Table 3-1 Parameter description
Parameter Description
Ways to obtain IP Method of obtaining the IP address.
NOTE
lIf a Dynamic Host Configuration Protocol
(DHCP) server is configured for the current
network and the IPC automatically obtains its
IP address from the DHCP server, the system
will automatically set the IP address, subnet
mask, gateway IP address, and Domain
Name Server (DNS).
lAfter the IPC automatically obtains its IP
address from the DHCP server, you can view
the MAC address of the IPC through the
DHCP server and then find the IP address of
the IPC based on the MAC address.
IP address Camera IP address. This parameter is
available only when you set Ways to obtain
IP to Manual.
IP addresses starting with 127 are invalid.
You must enter an IP address starting with
another value that ranges from 1 to 223. The
default value is 192.168.0.120.
NOTE
Click Detect to check whether the IP address is
available.
Subnet mask Subnet mask of the IPC. The default value
is 255.255.255.0.
Gateway IP address Gateway IP address of the IPC. The default
value is 192.168.0.1.
Preferred DNS server IP address of the active domain server. The
default value is 0.0.0.0.
Alternate DNS server IP address of the standby domain server.
The default value is 0.0.0.0.
Step 3 Click Save.
----End
3.2 Setting platform Connection Parameters
IPCs can register with the video surveillance platform using GB/T 28181, SDK, ONVIF, or
GENETEC to view live video viewing, set parameters, and control the PTZ.
IPC6125-WDL-FA
Configuration Guide 3 Setting Basic Parameters
Issue 01 (2016-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11

NOTE
lParameters to be set vary depending on protocols. IPCs can connect to the video surveillance platform
successfully only when parameter setting is completed both on the video surveillance platform and IPCs.
lThis section describes how to set parameters on IPCs. For details about how to set parameters on the
video surveillance platform, see the corresponding documentation of the platform.
3.2.1 Setting Parameters for an SDK-based Connection
When the SDK protocol is used when connecting IPCs to the platform, you need to set the
SDK parameters.
NOTE
lActive registration: indicates that the IPC proactively initiates a registration request to the platform.
lPassive registration: indicates that the platform initiates a registration request to the IPC.
Connection to the Platform Through Active SDK Registration
Step 1 Choose Settings > System Configuration > Platform Connection Parameters.
The page for setting platform connection parameters is displayed.
Step 2 In the SDK configuration area, select Enable.
Step 3 Choose Active SDK registration in Protocol type.
Step 4 Set SDK parameters, as shown in Figure 3-2. For detailed parameter description, see Table
3-2.
IPC6125-WDL-FA
Configuration Guide 3 Setting Basic Parameters
Issue 01 (2016-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12

Figure 3-2 Active SDK registration
IPC6125-WDL-FA
Configuration Guide 3 Setting Basic Parameters
Issue 01 (2016-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13

Table 3-2 SDK parameter description
Parameter Description
Registration type
The options are as follows:
lSingle-server mode: applies when the video surveillance
platform is deployed in a single-node system.
lDual-server mode: applies when the video surveillance
platform is deployed in a two-node cluster.
NOTE
The following describes the principles for connecting to the platform
in dual-server mode:
The IPC preferentially connects to the platform of the first IP address.
When the connection fails or interrupts, the IPC connects to the
platform of the second IP address. When the connection to the first
platform recovers, the IPC will connect to the first platform only after
disconnecting from the second platform.
If the third-party platform supports dual-server mode, the IPC can be
connected to the third-party platform.
Platform IP IP address of the video surveillance platform server.
Port number Port number of the video surveillance platform server. The
default value is 5060.
Device ID
Unique IPC ID.
NOTE
The value of this parameter must be the same as the device ID (the
code of the IVS platform, the parameter name is Code) configured on
the video surveillance platform. If they are different, the IPC will fail
to connect to the video surveillance platform.
IPC6125-WDL-FA
Configuration Guide 3 Setting Basic Parameters
Issue 01 (2016-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14