Humanox HX50 Instruction manual

QUICK USER GUIDE
HX50 AND HUOX
SPACE

Copyright © 2021 HUMANOX SOCCER S.A. All rights reserved. This
manual reflects the operation of the HX50 smart shin guards and the HUOX
Space platform.
HUMANOX SOCCER S.A., 11500 Lg la Oropéndola, Calle «D», num 1,
El Puerto de Santa María, Cádiz, ESPAÑA.
Tel.: [phone]
Dirección de sitio web: www.humanox.com
Unless expressly stated herein, no part of this manual may be reproduced,
copied, transmitted, broadcast, downloaded, or stored in any storage
medium for any purpose without the express written permission of
HUMANOX.
HUMANOX is a registered trademark of HUMANOX SOCCER S.A.
HUMANOX informs that the HX50 is not a diagnostic medical device. For any medical problem it is important that
you have seen or visited your physician and initiated or completed treatment.
Nothing in this guide is intended to be medical advice, nor should it be construed as such. Consumers should consult
with their own health care professionals for their individual medical recommendations. The information on thiswebsite
relates to smart shin guards for sports performance monitoring, an over-the-counter product that is not a medical
device. Our products are not intended to be used as a means to cure, treat, prevent, diagnose or mitigate any disease
or other medical or abnormal condition.

You have just acquired the HX50
smart shin guards from HUMANOX
You are about to enter HUOX Space, the
platform that integrates the HX50
In these pages, we will guide you step by
step through the HX50 and we will teach you
how to use HUOX Space

GENERAL DESCRIPTION OF THE HX50
HOME QUICK USER GUIDE HX50
CONTENT OF YOUR HX50
KNOW YOUR HX50
HX50 INTERNAL PART
TURNING ON YOUR SHIN GUARDS
IDENTIFIER/IMEI/MAC NUMBER
TURNING OFF YOUR SHIN GUARDS
CHARGING BASE FOR YOUR HX50
CHARGE YOUR HX50
HOME
QUICK USER GUIDE HX50
THROUGH THE WEB
REGISTER IN HUOX SPACE
MAIN SCREEN
ADD YOUR SHIN GUARDS
START A MATCH
CHECK YOUR METRICS
CHANGE THE DEVICE
HOW TO LOG OUT
ACCESS THE PLATFORM THROUGH THE APP
REGISTER IN HUOX SPACE
ADD/SYNCRONIZE YOUR SHIN GUARDS
START A MATCH
CHECK YOUR METRICS
SWITCH THE DEVICE
HOW TO LOG OUT
RECOMMENDATIONS AND WARNINGS
5, 6
7
8
8
9
10, 11
11
11
12
13,14
15
16
16,17
18
19,20
20
22
23
23
24
24,25
26
26
27
27
28
28
29,30

The HX50 are the world's first smart and connected carbon shin guards, capable of
collecting more than 50,000 pieces of raw data, and translating them in real time in
the form of metrics on the HUOX Space platform. Manufactured with aerospace
technology using carbon fiber, which makes them very resistant and lightweight,
HUMANOX shin guards become an aid for the player's sports performance and
health status.
This highly technological device is equipped with an electronic board inside with
sensors and advanced elements such as gyroscopes, accelerometers, GPS, heart
rate sensor, etc. All the data collected will be available on the HUOX Space
ecosystem through the web or the App on both Android and iOS.
The metrics that can be obtained using the HX50 are the following:
Time spent walking and standing Calories
Time spent running Number of Steps
Time spent sprinting Time played
Average speed Temperature
Maximum speed Total Distance
Maximum Heart Rate. Average Heart Rate
Ball kicks with the left Leg Impacts
Ball kicks with the right Leg Activity Percentage Graph
Heart Rate Frequency Graph Speed Graph
*Day by day we are incorporating new metrics. Visit our website for the most updated version of
the guide: https://humanox.com/
5
ENERAL DESCRIPTION OF THE HX50

NFORMATION COVID-19
The HUOX Space APP offers a Covid alert. During the first five minutes of use, an
alarm message is triggered if the player's temperature exceeds 38° degrees Celsius.
This warning is possible thanks to the body temperature sensor built into the HX50.
Before going into the guide of the HX50 smart device and the HUOX Space platform,
we must inform you that it is important to have an active subscription to the platform
(to check plans and prices visit our website https://humanox.com/) once the user has
received the smart shin guards.
In said digital ecosystem, you can synchronize / add your shin guards to get the data
collected from the HX50 in real time.
You can also subscribe as a follower without having to purchase the device, so your
friends and family can follow you in real time, both you and your favorite players.
6

HX50
7

ONTENT OF YOUR HX50
Your HX50 set includes a bag to store your shin guards, a charging base, and a USB cable for
charging.
Carrying bag
Charging base
HX50
USB Cable for charging
The HX50 smart shin guards are a sensorized device with real-time connection, equipped with high
technology made available to the user. These shin guards are made of carbon fiber, which makes
them very light. Its mechanical properties allow that the strength of any received impact is distributed
over the entire surface, thus reducing the power of the impact that the player receives.
LEFT RIGHT
8
NOW YOUR HX50

Both shin guards, left and right, are different both in their internal design and in their functionalities.
To differentiate between the left and right shin guards, note that the left HX50 has a built-in sensor
with three LEDs, while the right HX50 has a single LED. In addition, on the outside, the HX50 is labeled
"Left" (left shin guard) and "Right" (right shin guard).
LEFT
SHIN GUARD
RIGHT SHIN GUARD
TURN ON LED/ STATUS
It gives us information regarding
connectivity with the mobile network and
GPS connectivity
Your HX50 will automatically shut down after two minutes of inactivity. The complete shutdown process is described on page 11.
9
•
•
X50 INTERNAL PARTS

RIGHT SHIN GUARD
When turning on the right shin guard, you should be aware of its 3
power-on states:
FIXED LED (Steady Green Light): means that the right HX50 is
powered on correctly.
SLOW FLASHING LED: Green light with one single flash per
second): Means correct connectivity of the shin guard to the mobile
network, i.e. shin guard correctly connected to the HUOX Space
platform.
.
FAST BLINKING LED (Green light with two blinks per second:
means GPS signal activated. To get a GPS signal, it is important
to hold the right shin guard in your hand for about 40 seconds
before putting it in place.
10
URNING ON YOUR SHIN GUARDS
They must first be charged (page 13 of this guide). Turning on the HX50 is very simple, you just have
to hold the shin guard with one hand and, with two fingers of the other hand, tap twice on the inner
central part to turn it on. This process must be done with each shin guard. There is not a preference
to turn on the left or right first. Turn them on outdoors before starting your match or training (Pay
attention to the Satellite/GPA acquisition process described on this page).

LEFT SHIN GUARD
The HX50 remains fixed from the
start and will not change its status
until it is turned off again.
UMBER IMEI OR MIC
A 15-digit identification number is printed on the inside. This number is unique and is the one that
is entered into the HUOX Space platform so that the shin guards are correctly synchronized. If you
add your shin guards through the HUOX Space website, the identification number appears under
the name IMEI. If you are adding the HX50 from the APP, this number appears as MIC. The ID
number can be found on both the left and right shin guards. The synchronization process is
described on page 26.
NUMBER
IMEI OR MIC
TURNING OFF YOUR SHIN GUARDS
Your shin guards will automatically turn off after two minutes of inactivity.
They will also turn off when inserted into the main charging base, as described in the "Charging your
shin guards" section on page 13 of this guide.
11
A 15-digit identification number is printed on the inside. This number is unique and is the one
that is entered into the HUOX Space platform so that the shin guards are correctly
synchronized. If you add your shin guards through the HUOX Space website, the
identification number appears under the name IMEI. If you are adding the HX50 from the
APP, this number appears as MIC. The ID number can be found on both the left and right
shin guards. The synchronization process is described on page 26.

HARGING BASE FOR YOUR HX50
Your HX50 comes with a charging base and USB cable. For a full charge, the approximate charging
time is 4 hours. The first time you charge them you will need to leave them for 6 hours.
Micro USB port to insert the cable to charge the shin guards.
| Charge identification LEDs for your HX50. They also inform you when the HX50s are fully
charged. (Charging the LEDs blink, when fully charged the LEDs remain fixed).
| Spaces in which to deposit the HX50s to be charged.
12
Your HX50 comes with a charging base and USB cable. For a full charge, the approximate
charging time is 4 hours. The first time you charge them you will need to leave them for 6
hours.

HARGING YOUR HX50
First, place the HX50 on the charging base.
When loading the HX50 it is important to
place the shin guards correctly in the spaces
of the charging base. To do this, you must
place the shin guard vertically. Once the shin
guard is vertical, you will need to insert the
narrowest part of the shin guard into the
space allotted for the charging base. Then
press the shin pad down until it clicks into the
bottom.
Plug the USB cable into the USB port,
which is located in one of the laterals of the
inferior part of the charging base.
13
To charge the HX50, you need to note that a USB cable is provided with the delivery of the shin
guards. A USB adapter or another source such as a computer can be used as a power source
which is not included in your pack.

Then, plug the cable into the power source and
charge the HX50 for 4 hours.
(6 hours for the first time) The charging base
adapts to any power source from a USB
adapter to a computer, for example. Please
note that for the charging process to last four
hours you need to use a 3.5 mA charger plug.
If this is lower than recommended, the charging
process may take longer.
The LEDs will give you the information if the
shin guards are charging correctly or if the
HX50 are fully charged. Ifboth LEDs, which are
located on each side of the micro-USB port of
the charging base (one LED for the left shin
guard and one LED for the right shin guard),
are flashing, it means that the HX50 are
charging correctly. When the LEDs remain
fixed, it means that the HX50s are already
charged.
14

HUOX SPACE
Registration to the HUOX Space platform can be done from the web or from the APP, available on both
Android and iOS. To enjoy the advantages and benefits of the HUOX Space ecosystem you need to
subscribe.
Remember that if you have any doubts or questions regarding the operation of the HX50 device or the
HUOX Space platform, you can contact Customer Service:
Phone Numbers: [phone] / [phone]
WhatsApp: [phone]
Email: a[email protected]
15
ENERAL DESCRIPTION OF HUOX SPACE
HUOX Space is the HUMANOX platform where you can see your metrics for each match or training
session. Here you can create a profile and link your HX50 shin guards, as well as follow other users,
have them follow you and share your metrics.

ccess through the web
EGISTER ON THE HUOX SPACE PLATFORM
Enter the website: https://live.humanox.com.
Then click the button “Sign up"
16
In the following pages, you can see the steps you need to follow to enjoy all the functionalities that
HUOX Space offers through the web.
Registering on HUOX Space through the website is very easy. Remember that you need to be
a subscriber to be able to see your metrics for each training session or match.

You will find three profiles: player, technical
team (coach or physical trainer), environment
(parents or followers). Choose the one that
applies.
Accept the terms and conditions.
Click "CREATE AN ACCOUNT"
Fill in your personal data.
After the message "Account successfully
created" pops up, click "ACCEPT."
17

From the main screen you will be able to access the 3 HUOX SPACE menu selections
Left menu selection:
Add and remove shin guards,
Start and stop matches,
Superior Right Menu :
Check your metrics
Edit profile
Interact with other users
Log out
Inferior Right Menu:
Synchronize your shin
guards
Check the GPS signal
status
Record the match
18
AIN SCREEN

DDING YOUR SHIN GUARDS
Click on "MY SHIN GUARDS"
Click on “ADD SHIN GUARDS”
Fill in the IMEI number of your shin guards.
Click on “ADD”
IMEI
The IMEI is the identification number of the HX50 to
connect to the HUOX Space platform. It appears on
both the left and right shin guards, and is given under
the name MIC.
19
First of all, you need to add your shin guards to your previously registered user. To do this you
have to turn them on, wait for the HX50 LED to flash every second and follow the steps described
below. Once added, through the APP or web, you will be able to record your matches or training
sessions, as long as the HX50 are turned on and they have a GSM and GPS mobile network
signal. You will also be able to see in the APP and/or Web all the registered/recorded
matches/trainings.

ATTENTION: Before starting the game, make sure that the HX50s are turned on and
connected to GPS (two flashes per second).
Click in “MY GAMES"
20
Click the green "+"
Check that the identification number is correct
TARTING A MATCH