Getting to Know Your H2
10
Automatic Climate Control
System
In addition to its automatic temperature
control feature, this climate control sys-
tem allows the driver and front passen-
ger to choose separate temperature
settings.
Adjust settings for automatic
operation
•Push the AUTO button (A) and adjust
the temperature knobs (B) to the
desired temperature, to set automatic
air delivery mode, fan speed, A/C and
recirculation functions.
Set same temperature for driver and
front passenger
• Press and hold the AUTO button for
four seconds.
Select air distribution manually
• Press and release the Mode button
(C) until the desired source of air is
indicated on the display.
Manually raise or lower fan speed
•Press the upper or lower portion of
the fan control button (D).
Additional Climate Control System
Functions
(Recirculation): Recirculates
interior air while in Vent or Bi-Level
position. To prevent window fogging,
Recirculation will not operate in the
Defog, Defrost or Floor mode.
(Air Conditioning): Turns the air
conditioning system on or off. The snow-
flake symbol appears on the display
when the air conditioning system is on.
(Defrost): Clears windshield and
front side windows of fog/frost.
(Rear Window Defogger): Clears
rear glass of fog/frost and activates
heated outside rearview mirrors.
See Section 3 of your Owner Manual.
Note: When the climate control system
is off, outside air will continue to enter
the vehicle and will be directed accord-
ing to the mode position selected. This
is normal climate control operation.
ENTERTAINMENT
Audio Systems
Your radio may have a button marked
“H” or “HR” to represent hours and an
“M” or “MIN” to represent minutes.
Set the time
•
Press and hold the hour button until the
correct hour appears on the display.
•Press and hold the minute button
until the correct minute appears on
the display.
Note: The time may be set with the
ignition on or off.
ABB
DC
Hummer H2 2007 A 5/25/06 3:01 PM Page 10
