HumminGuru HG7A User manual

HumminGuru Record Adapter
Owner’s Manual
Model : HG7A | HG10A
Read these instructions
carefully before use and keep
it for future reference.
To install and use, follow the steps below:
Push the 2 bottom rubber
stoppers toward the
outer ring of the adapter.
Pay attention to
the direction of the
rubber stoppers.
Insert the record into
the gap of the 2 top
rubber stoppers.
Insert the rubber
stopper into the slot
on the adapter ring.
Slide the 2 bottom rubber
stoppers toward the
record and secure it.
Apply to all four slots.
WARNING
INSTALLATION AND USE
• Do not bend, break, or throw the adapter. Doing so may result in product
damage or injury.
• Avoid sunlight and keep in shade. Failure to do so will result in product damage.
• Keep the rubber stoppers out of reach of children less than 8 years.
The package includes:
Record adapter X1
Rubber stoppers X4
4.
1.
5.
2.
6.
3.
rubber stopper
Slot
Top
Bottom

Insert the adapter into the cleaner. To take out
the record, repeat step 4.
7.
Notice
• The rubber stoppers on
the top two slots are non-
movable. Only the bottom
ones are movable.
• The 7” adapter was used as
an illustration example. Apply
the same installation method
to the 10” record adapter.
• Insert the adapter gently into
the cleaner with both hands.
• Each record is slightly
different in terms of size
and thickness. The record
adapters are designed based
on the standard record size.
HumminGuru Record Adapter
Model: HG7A | HG10A
Product Size: 303 x 303 x 2 mm
Package Size: 325 x 325 x 21mm
Happy Well International Enterprise Ltd.
Rm. 1202 12/F New Mandarin Plaza, Tower B
No. 14 Science Museum Road,
Tsim Sha Tsui East, Kowloon
Hong Kong
(852) 2544 2728
© 2021 Happy Well International Enterprise Ltd.
ALL RIGHTS RESERVED.
MADE IN CHINA
Find out more
at humminguru.com
#HUMMINGURU