Husqvarna 701 Enduro 2023 User manual

OWNER'S MANUAL 2023
701 Enduro
Art. no. 3402672en

DEAR HUSQVARNA MOTORCYCLES CUSTOMER
*3402672en*
3402672en
20.10.2022
DEAR HUSQVARNA MOT ORCYCLES CUSTOMER
Congratulations on your decision to purchase a Husqvarna motorcycle. You are now the owner of a state-of-
the-art sports vehicle which, with appropriate care, will bring you pleasure for a long time to come.
We wish you good and safe riding at all times!
Enter the serial numbers of your vehicle below.
Vehicle identification number ( p. 17) Dealer's stamp
Engine number ( p. 18)
Key number ( p. 17)
The Owner's Manual contained the latest information for this model series at the time of publication. However,
minor differences due to further developments in design cannot be ruled out completely.
All specifications contained herein are non-binding. Husqvarna Motorcycles GmbH specifically reserves the
right to modify or delete technical specifications, prices, colors, forms, materials, services, designs, equipment,
etc., without prior notice and without specifying reasons, to adapt these to local conditions, as well as to stop
production of a particular model without prior notice. Husqvarna Motorcycles accepts no liability for delivery
options, deviations from illustrations and descriptions, as well as misprints and other errors. The models por-
trayed partly contain special equipment that does not belong to the regular scope of supply.
© 2022 Husqvarna Motorcycles GmbH, Mattighofen Austria
All rights reserved
Reproduction, even in part, as well as copying of all kinds, is permitted only with the express written permission
of the copyright owner.
ISO 9001(12 100 6061)
Husqvarna Motorcycles applies quality assurance processes that lead to the highest possible
product quality as defined in the ISO 9001 international quality management standard.
Issued by: TÜV Management Service
Husqvarna Motorcycles GmbH
Stallhofnerstraße 3
5230 Mattighofen, Austria
This document is valid for the following models:
701 Enduro US (F2675W1)

TABLE OF CONTENTS
2
TABLE OF CONTENTS
1 MEANS OF REPRESENTATION........................ 5
1.1 Symbols used ....................................... 5
1.2 Formats used........................................ 5
2 SAFETY ADVICE ............................................... 6
2.1 Use definition –intended use ............... 6
2.2 Misuse................................................... 6
2.3 Safety advice ........................................ 6
2.4 Degrees of risk and symbols ................ 6
2.5 Overview of labels................................. 7
2.6 Reporting safety defects....................... 9
2.7 Noise emission warranty..................... 10
2.8 Operating noise warning..................... 10
2.9 Manufacturer warranty for the
exhaust monitoring system................. 10
2.10 Consumer rights ................................. 11
2.11 Tampering warning ............................. 11
2.12 Safe operation..................................... 11
2.13 Protective clothing.............................. 12
2.14 Work rules........................................... 12
2.15 Environment........................................ 12
2.16 Owner's Manual.................................. 13
3 IMPORTANT NOTES....................................... 14
3.1 Manufacturer warranty, implied
warranty .............................................. 14
3.2 Fuel, auxiliary substances................... 14
3.3 Spare parts, accessories .................... 14
3.4 Service ................................................ 14
3.5 Figures ................................................ 14
3.6 Customer service................................ 14
4 VIEW OF VEHICLE .......................................... 15
4.1 View of vehicle, front left (example) .... 15
4.2 View of vehicle, rear right
(example)............................................. 16
5 SERIAL NUMBERS.......................................... 17
5.1 Vehicle identification number.............. 17
5.2 Type label............................................ 17
5.3 Key number......................................... 17
5.4 Engine number.................................... 18
5.5 Fork part number ................................ 18
5.6 Shock absorber article number .......... 18
6 CONTROLS ..................................................... 19
6.1 Clutch lever......................................... 19
6.2 Hand brake lever................................. 19
6.3 Throttle grip......................................... 19
6.4 Horn button......................................... 19
6.5 Light switch......................................... 20
6.6 Turn signal switch............................... 20
6.7 Emergency OFF switch....................... 20
6.8 Start button......................................... 20
6.9 Combination switch ............................ 21
6.10 Ignition and steering lock.................... 21
6.11 Overview of indicator lamps ............... 22
6.12 Opening fuel tank filler cap................. 22
6.13 Closing the fuel tank filler cap............. 23
6.14 Seat release ........................................ 23
6.15 Grab handles ...................................... 23
6.16 Passenger foot pegs........................... 24
6.17 Shift lever ............................................ 24
6.18 Foot brake lever.................................. 24
6.19 Side stand........................................... 25
7 COMBINATION INSTRUMENT ....................... 26
7.1 Overview ............................................. 26
7.2 Activation ............................................ 26
7.3 Messages on the combination
instrument........................................... 26
7.4 Setting the combination instrument.... 26
7.5 Setting the kilometers or miles ........... 28
7.6 Setting the clock................................. 28
7.7 Setting the service display.................. 29
7.8 Speed, time, and DST distance 1....... 29
7.9 Speed, time, and DST2 distance 2..... 30
7.10 AVG average speed, ART operating
hours, and ODO total distance
covered ............................................... 30
8 PREPARING FOR USE.................................... 31
8.1 Advice on preparing for first use......... 31
8.2 Running in the engine ......................... 32
8.3 Loading the vehicle............................. 32
9 RIDING INSTRUCTIONS ................................. 34
9.1 Checks and maintenance measures
when preparing for use....................... 34
9.2 Starting the vehicle ............................. 34
9.3 Starting off .......................................... 36
9.4 Shifting, riding..................................... 36
9.5 Braking................................................ 38
9.6 Stopping, parking ............................... 40
9.7 Transport............................................. 41
9.8 Towing in the event of a
breakdown .......................................... 41
9.9 Refueling............................................. 42
10 SERVICE SCHEDULE...................................... 43
10.1 Additional information......................... 43
10.2 Service schedule................................. 43
11 TUNING THE CHASSIS................................... 45
11.1 Fork/shock absorber........................... 45

TABLE OF CONTENTS
3
11.2 Adjusting the compression damping
of the fork............................................ 45
11.3 Adjusting the rebound damping of
the fork................................................ 46
11.4 Compression damping of the shock
absorber.............................................. 46
11.5 Adjusting the low-speed
compression damping of the shock
absorber.............................................. 46
11.6 Adjusting the high-speed
compression damping of the shock
absorber.............................................. 47
11.7 Adjusting the rebound damping of
the shock absorber............................. 48
11.8 Handlebar position.............................. 48
11.9 Adjusting the handlebar position .... 49
12 SERVICE WORK ON THE CHASSIS ............... 50
12.1 Raising the motorcycle with a lift
stand ................................................... 50
12.2 Removing the motorcycle from the
lift stand .............................................. 50
12.3 Raising the motorcycle with rear
lifting gear ........................................... 50
12.4 Removing the rear of the
motorcycle from the lifting gear.......... 51
12.5 Bleeding the fork legs......................... 51
12.6 Cleaning the dust boots of the fork
legs ..................................................... 51
12.7 Removing the fork protector............... 52
12.8 Installing the fork protector................. 52
12.9 Checking the steering head bearing
play ..................................................... 53
12.10 Adjusting steering head bearing
play .................................................. 53
12.11 Removing the seat.............................. 54
12.12 Mounting the seat............................... 54
12.13 Removing the tool set......................... 54
12.14 Storing tool set.................................... 55
12.15 Take off the side cover ....................... 56
12.16 Mounting the side cover ..................... 56
12.17 Removing front fender ........................ 56
12.18 Installing front fender .......................... 57
12.19 Removing the air filter ..................... 57
12.20 Installing the air filter ....................... 57
12.21 Checking the chain for dirt.................. 58
12.22 Cleaning the chain .............................. 58
12.23 Checking the chain tension ................ 59
12.24 Adjusting the chain tension................. 60
12.25 Checking the chain, rear sprocket,
engine sprocket, and chain guide....... 60
12.26 Adjusting the chain guide ............... 63
12.27 Adjusting the basic position of the
clutch lever.......................................... 63
12.28 Checking the rubber grip.................... 64
12.29 Checking/correcting the fluid level
of the hydraulic clutch ........................ 64
12.30 Removing engine guard...................... 65
12.31 Installing the engine guard.................. 65
13 BRAKE SYSTEM ............................................. 66
13.1 Anti-lock braking system (ABS) .......... 66
13.2 Adjusting the basic position of the
hand brake lever ................................. 67
13.3 Checking the brake discs ................... 67
13.4 Checking the front brake fluid level .... 68
13.5 Adding front brake fluid .................. 68
13.6 Checking that the brake linings of
the front brake are secured ................ 69
13.7 Changing the brake linings of the
front brake ....................................... 70
13.8 Checking the free travel of foot
brake lever .......................................... 72
13.9 Adjusting the basic position of the
foot brake lever ............................... 73
13.10 Checking the rear brake fluid level ..... 73
13.11 Adding rear brake fluid .................... 74
13.12 Checking that the brake linings of
the rear brake are secured.................. 75
13.13 Changing the rear brake linings ...... 75
14 WHEELS, TIRES.............................................. 78
14.1 Removing the front wheel ............... 78
14.2 Installing the front wheel ................. 79
14.3 Removing the rear wheel ................ 79
14.4 Installing the rear wheel .................. 80
14.5 Checking the rear hub damping
rubber pieces .................................. 82
14.6 Checking the tire condition................. 83
14.7 Checking tire pressure........................ 84
14.8 Checking spoke tension ..................... 84
14.9 Using tire repair spray......................... 85
15 ELECTRICAL SYSTEM.................................... 86
15.1 Removing the 12-V battery ............. 86
15.2 Installing the 12-V battery ............... 87
15.3 Charging the 12-V battery ............... 88
15.4 Changing the main fuse...................... 89
15.5 Changing the ABS fuses..................... 90
15.6 Changing the fuses of individual
electrical power consumers................ 92
15.7 Removing the headlight mask with
the headlight ....................................... 93
15.8 Installing the headlight mask with
the headlight ....................................... 94
15.9 Changing the headlight bulb............... 94
15.10 Changing the position light lamp........ 95
15.11 Checking the headlight setting ........... 96

TABLE OF CONTENTS
4
15.12 Adjusting the headlight range............. 96
15.13 Changing the turn signal bulb............. 97
15.14 ACC1 and ACC2................................. 97
15.15 Diagnostics connector........................ 98
16 COOLING SYSTEM......................................... 99
16.1 Cooling system ................................... 99
16.2 Checking the antifreeze and coolant
level..................................................... 99
16.3 Checking the coolant level................ 100
16.4 Draining the coolant ...................... 101
16.5 Filling/bleeding the cooling
system ........................................... 102
16.6 Changing the coolant .................... 103
17 TUNING THE ENGINE................................... 105
17.1 Changing the riding mode ................ 105
17.2 Adjusting traction control.................. 105
17.3 Checking the basic position of the
shift lever........................................... 106
17.4 Adjusting the basic position of the
shift lever ....................................... 106
18 SERVICE WORK ON THE ENGINE ............... 107
18.1 Changing the fuel screen .............. 107
18.2 Checking the engine oil level ............ 108
18.3 Changing the engine oil and oil
filter, cleaning the oil screens ....... 108
18.4 Adding engine oil .............................. 111
19 CLEANING, CARE......................................... 113
19.1 Cleaning the motorcycle................... 113
19.2 Checks and maintenance steps for
winter operation................................ 114
20 STORAGE...................................................... 116
20.1 Storage ............................................. 116
20.2 Preparing for use after storage......... 117
21 TROUBLESHOOTING ................................... 118
22 TECHNICAL DATA ........................................ 120
22.1 Engine ............................................... 120
22.2 Engine tightening torques................. 121
22.3 Capacities ......................................... 124
22.3.1 Engine oil...................................... 124
22.3.2 Coolant......................................... 124
22.3.3 Fuel............................................... 124
22.4 Chassis ............................................. 124
22.5 Electrical system............................... 125
22.6 Tires .................................................. 125
22.7 Fork................................................... 125
22.8 Shock absorber ................................ 126
22.9 Chassis tightening torques ............... 126
23 SUBSTANCES............................................... 131
24 AUXILIARY SUBSTANCES............................ 133
25 STANDARDS ................................................. 135
26 INDEX OF SPECIAL TERMS ......................... 136
27 LIST OF ABBREVIATIONS ............................ 137
28 LIST OF SYMBOLS ....................................... 138
28.1 Red symbols ..................................... 138
28.2 Yellow and orange symbols.............. 138
28.3 Green and blue symbols................... 138
INDEX .................................................................... 139

MEANS OF REPRESENTATION 1
5
1.1 Symbols used
The meaning of specific symbols is described below.
Indicates an expected reaction (e.g., of a work step or a function).
Indicates an unexpected reaction (e.g., of a work step or a function).
Indicates work that requires expert knowledge and technical understanding.
In the interests of your own safety, have these jobs performed by an authorized
Husqvarna Motorcycles workshop. Your motorcycle will be cared for there to the highest
degree by specially trained experts using the special tools required.
Indicates a page reference (more information is provided on the specified page).
Indicates information with more details or tips.
Indicates the result of a testing step.
Indicates the end of an activity, including potential reworking.
1.2 Formats used
The typographical formats used in this document are explained below.
Proprietary name Indicates a proprietary name.
Name®Indicates a protected name.
Brand™ Indicates a brand available on the open market.
Underlined terms Refer to technical details of the vehicle or indicate technical terms, which
are explained in the glossary.

2 SAFETY ADVICE
6
2.1 Use definition –intended use
The vehicle is designed and constructed to withstand the usual demands of regular traffic and use on gentle
terrain (unpaved roads).
This vehicle is not suitable for use on race tracks.
Info
This vehicle is only authorized for operation on public roads in its homologated version.
When used in a dusty environment, it may be necessary to use air filter protection. Your authorized
Husqvarna Motorcycles dealer will be glad to advise you.
2.2 Misuse
The vehicle must only be used as intended.
Dangers can arise for people, property and the environment through use not as intended.
Any use of the vehicle beyond the intended and defined use constitutes misuse.
Misuse also includes the use of operating and auxiliary fluids which do not meet the required specification for
the respective use.
2.3 Safety advice
A number of safety instructions need to be followed to operate the product described safely. Therefore read
this instruction and all further instructions included carefully. The safety instructions are highlighted in the text
and are referred to at the relevant passages.
Info
Various information and warning labels are attached in prominent locations on the product described.
Do not remove any information or warning labels. If they are missing, you or others may not recognize
dangers and may therefore be injured.
2.4 Degrees of risk and symbols
Danger
Identifies a danger that will immediately and invariably lead to fatal or serious permanent injury if the
appropriate measures are not taken.
Warning
Identifies a danger that is likely to lead to fatal or serious injury if the appropriate measures are not
taken.
Caution
Identifies a danger that may lead to minor injuries if the appropriate measures are not taken.
Note
Identifies a danger that will lead to considerable machine and material damage if the appropriate measures are
not taken.
Note
Indicates a danger that will lead to environmental damage if the appropriate measures are not taken.

SAFETY ADVICE 2
7
2.5 Overview of labels
V01474-10
1 Information, chain tension
2 Information, suspension setting
3 Information, noise emission
4 Type label, USA
5 Type label, Canada
6 Information, emission control
7 Information on tires
8 Information, putting into operation
W00171-10
Information, chain tension

2 SAFETY ADVICE
8
W00129-10
Information, suspension setting
W00152-10
Information, noise emission
W00154-10
Type label, USA
W00154-10
Type label, Canada

SAFETY ADVICE 2
9
W00155-10
Information, emission control
B01344-01
Information on tires
F00491-01
Information, putting into operation
2.6 Reporting safety defects
If you believe that your vehicle has a defect which could cause an accident resulting in injury or death, you
should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying
Husqvarna Motorcycles North America, Inc.
If the NHTSA receives multiple similar complaints, it may open an investigation. and if it finds that a safety
defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot
become involved in individual problems between you, your dealer, or Husqvarna Motorcycles North America,
Inc.
You can contact the NHTSA via the toll-free “Auto Safety Hotline” on 1–888–327–4236, visit the
www.nhtsa.dot.gov website, or write to: NHTSA Headquarters, 1200 New Jersey Avenue, SE, West Building,
Washington, DC 20590, USA. You can also obtain other information about motor vehicle safety from the
hotline.

2 SAFETY ADVICE
10
2.7 Noise emission warranty
Husqvarna Motorcycles North America, Inc. guarantees that this exhaust system satisfies all U.S. EPA Federal
noise emission standards applicable at the time of sale.
This manufacturer’s warranty extends to the first person who purchases this exhaust system for purposes other
than resale, and to all subsequent buyers.
Warranty claims should be directed to:
Husqvarna Motorcycles North America, Inc., c/o KTM North America, Inc., Customer Support, 1119 Milan Ave.,
Amherst, OH 44001, USA
Phone: [phone]
www.husqvarna-motorcycles.com
Husqvarna Motorcycles North America, Inc., c/o KTM Canada, Inc., 8701 Rue Samuel‑Hatt, Chambly, QC J3L
6V4, Canada
Phone: [phone]
www.husqvarna-motorcycles.com
2.8 Operating noise warning
This product should be checked for necessary repair or replacement parts if the motorcycle noise has
increased significantly through use. Otherwise, the owner may become subject to penalties under the
applicable ordinances.
2.9 Manufacturer warranty for the exhaust monitoring system
Husqvarna Motorcycles North America, Inc. guarantees that, at the time of sale, the exhaust monitoring sys-
tem complies with all the standards of the US Environmental Protection Agency (EPA) and the California Air
Resources Board (CARB).
This manufacturer warranty applies in respect of the first owner of the motorcycle and all subsequent owners.
Your exhaust monitoring system may include parts, such as the fuel injection system, ignition, catalytic con-
verter, control units, hoses, connectors and other emission related assemblies, fuel tank, crankcase breather,
fuel tank lid for vehicles with fuel evaporation monitoring, oil filler cap, pressure control valve, fuel/vapor sep-
arator, canister, ignition coils, ignition wire, capacitors and spark plugs, if a fault occurs before the first sched-
uled replacement; it may also include the hoses, fittings, and pipes that are used directly in these components.
If the warranty conditions are met, Husqvarna Motorcycles will repair your motorcycle for you free of charge,
including diagnosis, parts and labor.
As the owner of the motorcycle, you are responsible for the required maintenance specified in the Owner's
Manual.
Please note that Husqvarna Motorcycles is entitled to reject warranty claims if your motorcycle or a part fails
due to misuse, negligence, an accident, participation in racing or similar events, improper service work, or
unauthorized modifications.
Scope of the manufacturer’s warranty
–Five (5) years or 30,000 kilometers (18,641 miles), whichever occurs first.
If you have any questions regarding the manufacturer warranty for the exhaust monitoring system, please
address these to:
Husqvarna Motorcycles North America, Inc., c/o KTM North America, Inc., Customer Support, 1119 Milan Ave.,
Amherst, OH 44001, USA
Phone: [phone]
U.S. Environmental Protection Agency, 2000 Traverwood Drive, Ann Arbor, MI 48105, USA
California Air Resources Board, 1001 "I" Street, Sacramento, CA 95814, USA

SAFETY ADVICE 2
11
2.10 Consumer rights
Warranty claims should be submitted to a Husqvarna Motorcycles workshop. If you are not satisfied, please
contact:
Husqvarna Motorcycles North America, Inc., c/o KTM North America, Inc., Customer Support, 1119 Milan Ave.,
Amherst, OH 44001, USA
Phone: [phone]
www.husqvarna-motorcycles.com
Husqvarna Motorcycles North America, Inc., c/o KTM Canada, Inc., 8701 Rue Samuel‑Hatt, Chambly, QC J3L
6V4, Canada
Phone: [phone]
www.husqvarna-motorcycles.com
Different rights may apply, according to national or regional legislation.
2.11 Tampering warning
Tampering with the noise control system is prohibited. Federal law prohibits the following acts or the causing
thereof:
1 The removal or rendering inoperative by any person other than for purposes of servicing, repair, or replace-
ment, of any device or element of design incorporated into any new vehicle for the purpose of noise control
prior to its sale or delivery to the ultimate purchaser or while it is in use, or
2 the use of the vehicle after such device or element of design has been removed or rendered inoperative by
any person.
Among those acts presumed to constitute tampering are the acts listed below:
1 Removal or puncturing of the main silencers, baffles, header pipes or any other components which conduct
exhaust gases.
2 Removal or puncturing of parts of the intake system.
3 Lack of proper maintenance.
4 Replacing moving parts of the vehicle, or parts of the exhaust system or intake system, with parts other
than those specified by the manufacturer.
2.12 Safe operation
Danger
Danger of accidents A rider who is not fit to ride poses a danger to him or herself and others.
–Do not operate the vehicle if you are not fit to ride due to alcohol, drugs or medication.
–Do not operate the vehicle if you are physically or mentally impaired.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result in unconsciousness and
death.
–Always make sure there is sufficient ventilation when running the engine.
–Use effective exhaust extraction when starting or running the engine in an enclosed space.
Warning
Danger of burns Some vehicle components become very hot when the vehicle is operated.
–Do not touch any parts such as the exhaust system, radiator, engine, shock absorber, or brake sys-
tem before the vehicle parts have cooled down.
–Let the vehicle parts cool down before you perform any work on the vehicle.
Only operate the vehicle when it is in perfect technical condition, in accordance with its intended use, and in a
safe and environmentally compatible manner.
An appropriate driver's license is needed to ride the vehicle on public roads.

2 SAFETY ADVICE
12
Have malfunctions that impair safety promptly eliminated by an authorized Husqvarna Motorcycles workshop.
Adhere to the information and warning labels on the vehicle.
2.13 Protective clothing
Warning
Risk of injury Missing or poor protective clothing presents an increased safety risk.
–Wear appropriate protective clothing such as helmet, boots, gloves as well as trousers and a jacket
with protectors on all rides.
–Always wear protective clothing that is in good condition and meets the legal regulations.
In the interest of your own safety, Husqvarna Motorcycles recommends that you only operate the vehicle while
wearing protective clothing.
2.14 Work rules
Unless specified otherwise, the ignition must be turned off during all work (models with ignition lock, models
with remote key) or the engine must be at a standstill (models without ignition lock or remote key).
Special tools are necessary for certain tasks. The tools are not a component of the vehicle, but can be ordered
using the number in parentheses. Example: bearing puller (15112017000)
Unless otherwise noted, normal conditions apply to all tasks and descriptions.
Ambient temperature 20 °C (68 °F)
Ambient air pressure 1,013 mbar (14.69 psi)
Relative air humidity 60 ± 5 %
During assembly, use new parts to replace parts which cannot be reused (e.g. self-locking screws and nuts,
expansion screws, seals, sealing rings, O-rings, pins, and lock washers).
In the case of certain screws, a screw adhesive (e.g. Loctite®) is required. Observe the manufacturer's instruc-
tions.
If thread locker (e.g., Precote®) has already been applied to a new part, do not apply any additional thread
locker.
After disassembly, clean the parts that are to be reused and check them for damage and wear. Change dam-
aged or worn parts.
After completing a repair or service work, check the operating safety of the vehicle.
2.15 Environment
If you use your motorcycle responsibly, you can ensure that problems and conflicts do not occur. To protect
the future of the motorcycle sport, make sure that you use your motorcycle legally, display environmental con-
sciousness, and respect the rights of others.
When disposing of used oil, other operating and auxiliary fluids, and used components, comply with the laws
and regulations of the respective country.
Because motorcycles are not subject to the EU regulations governing the disposal of used vehicles, there are
no legal regulations that pertain to the disposal of an end-of-life motorcycle. Your authorized Husqvarna Motor-
cycles dealer will be glad to advise you.

SAFETY ADVICE 2
13
2.16 Owner's Manual
It is important that you read this Owner's Manual carefully and completely before making your first trip. The
Owner's Manual contains useful information and many tips on how to operate, handle, and service your motor-
cycle. This is the only way to find out how best to customize the vehicle for your own use and how you can
protect yourself from injury.
Info
Store the Owner's Manual on your terminal device, for example, so that you can read it whenever you
need to.
If you would like to know more about the vehicle or have questions on the material you read, please contact an
authorized Husqvarna Motorcycles dealer.
The Owner's Manual is an important component of the vehicle. If the vehicle is sold, the Owner's Manual must
be downloaded again by the new owner.
The Owner's Manual can be downloaded several times using the QR code or the link on the delivery certificate.
The Owner's Manual is also available for download from your authorized Husqvarna Motorcycles dealer
and on the Husqvarna Motorcycles website. A printed copy can also be ordered from your authorized
Husqvarna Motorcycles dealer.
International Husqvarna Motorcycles website: www.husqvarna‑motorcycles.com

3 IMPORTANT NOTES
14
3.1 Manufacturer warranty, implied warranty
The work prescribed in the service schedule must only be carried out in an authorized Husqvarna Motorcy-
cles workshop and confirmed in the Husqvarna Motorcycles Dealer.net, as otherwise all warranty claims will
be void. Damage or secondary damage caused by tampering with and/or conversions on the vehicle are not
covered by the manufacturer warranty.
3.2 Fuel, auxiliary substances
Note
Environmental hazard Improper handling of fuel is a danger to the environment.
–Do not allow fuel to enter the groundwater, the soil, or the sewage system.
Use fuels and auxiliary substances in accordance with the Owner's Manual and specification.
3.3 Spare parts, accessories
For your own safety, only use spare parts and accessory products that are approved and/or recommended by
Husqvarna Motorcycles and have them installed by an authorized Husqvarna Motorcycles workshop. Husq-
varna Motorcycles accepts no liability for other products and any resulting damage or loss.
Certain spare parts and accessory products are specified in parentheses in the descriptions. Your authorized
Husqvarna Motorcycles dealer will be glad to advise you.
The current Husqvarna Motorcycles technical accessories for your vehicle can be found on the
Husqvarna Motorcycles website.
International Husqvarna Motorcycles website: www.husqvarna‑motorcycles.com
3.4 Service
A prerequisite for perfect operation and prevention of premature wear is that the service, care, and tuning work
on the engine and chassis is properly carried out as described in the Owner's Manual. An incorrect suspension
setting can lead to damage and breakage of chassis components.
Use of the vehicle under difficult conditions, such as dusty environments, heavy rain, high heat or with a heavy
load, can lead to considerably more rapid wear of components such as the air filter, drive train, brake system,
or suspension components. For this reason, it may be necessary to inspect or replace parts before the next
scheduled service.
It is imperative that you adhere to the stipulated run-in times and service intervals. If you observe these exactly,
you will ensure a much longer service life for your motorcycle.
The relevant mileage or time interval is whichever occurs first.
3.5 Figures
The figures contained in the manual may depict special equipment.
In the interest of clarity, some components may be shown disassembled or may not be shown at all. It is not
always necessary to disassemble the component to perform the activity in question. Please follow the instruc-
tions in the text.
3.6 Customer service
Your authorized Husqvarna Motorcycles dealer will be happy to answer any questions you may have regarding
your vehicle and Husqvarna Motorcycles.
A list of authorized Husqvarna Motorcycles dealers can be found on the Husqvarna Motorcycles website.
International Husqvarna Motorcycles website: www.husqvarna‑motorcycles.com

VIEW OF VEHICLE 4
15
4.1 View of vehicle, front left (example)
V01912-10
1Clutch lever ( p. 19)
2Seat
3Fuel tank filler cap
4Grab handles ( p. 23)
5Passenger foot pegs ( p. 24)
6Side stand ( p. 25)
7Seat release ( p. 23)
8Shift lever ( p. 24)
9Engine number ( p. 18)
bk Front brake caliper

4 VIEW OF VEHICLE
16
4.2 View of vehicle, rear right (example)
V01913-10
1Ignition and steering lock ( p. 21)
2Light switch ( p. 20)
2Turn signal switch ( p. 20)
2Horn button ( p. 19)
3Emergency OFF switch ( p. 20)
3Start button ( p. 20)
4Throttle grip ( p. 19)
5Hand brake lever ( p. 19)
6Vehicle identification number ( p. 17)
7Foot brake lever ( p. 24)
8Footrest
9Rear brake caliper

SERIAL NUMBERS 5
17
5.1 Vehicle identification number
401945-10
The vehicle identification number 1is stamped on the right side
of the steering head.
5.2 Type label
H01055-10
The USA type label 1is located on the right side of the frame.
The type label Canada 2is located on the left side of the frame.
5.3 Key number
402642-10
The key number 1can be found on the KEYCODECARD.
Info
You need the key number to order a spare key. Keep
the KEYCODECARD in a safe place.

5 SERIAL NUMBERS
18
5.4 Engine number
401949-10
The engine number 1is stamped on the left side of the engine
under the engine sprocket.
5.5 Fork part number
401947-10
The fork part number 1is stamped on the inner side of the fork
stub.
5.6 Shock absorber article number
402025-10
The shock absorber article number 1is on the left side of the
shock absorber.