Husqvarna NUDA 900 2012 Instruction manual

NUDA 900 2012/2013
NUDA 900 R 2012/2013
Workshop Manual Ed. 11-2011
Rev 02

Revision Record
Rev. No. Date Page Description
01 30/03/2012 A.5 "Cold tyre pressure - Rear" value corrected.
02 23/10/2012 All pages Inserted MY13 (section L excluded).
02 08/11/2012 D.18 Added value in the table.
02 08/11/2012 D.19 Applied change.
02 08/11/2012 D.25 Inserted text.
02 23/10/2012 F4.13 H10465 correct drawing in H12017.
02 08/11/2012 I.8 Added value in the table; applied change.
02 23/10/2012 Section L Valid only for MY12 - no ABS version.
02 23/10/2012 Section L1 Valid only for MY13 - ABS version.
02 08/11/2012 M.18 H10939 modiced drawing in H12123.
02 08/11/2012 M.21 H10942 modiced drawing in H12124.
02 23/10/2012 M.28 Delete note.
HUSQVARNA MOTORCYCLES S.R.L. - Varese disclaims all liabilities for any errors or omissions in this manual and
reserves the right to make changes to reect on-going product development. Illustrations in the manual may differ from
actual components. No reproduction in full or in part without written authorisation.
1st edition (11-2011) - Rev. 02

a.1
simbolo
NUDA 900 2012/2013 - NUDA 900 R 2012/2013
NUDA 900: ZKHA700A#CV000001
NUDA 900 R: ZKHA700B#CV000001
NUDA 900 2012/2013
NUDA 900 R 2012/2013
Workshop Manual Ed. 11-2011
FOREWORD, TABLE OF CONTENTS
1st edition (11-2011) - Rev. 02
Printed in Italy
MODELS COVERED (from serial number onwards)
Copyright by
HUSQVARNA MOTORCYCLES S.R.L.
BMW Group
Technical Service
Via Nino Bixio, 8
21024
(Varese) - Italy
tel. ++39 0332 75.61.11
tel. ++39 0332 756 558
www.husqvarna-motorcycles.com
Workshop Manual
1. Chassis serial number

a.2
simbolo
NUDA 900 2012/2013 - NUDA 900 R 2012/2013
FOREWORD, TABLE OF CONTENTS
Workshop Manual Ed. 11-2011
Foreword
This publication is designed for use by HUSQVARNA Service Centres to assist authorised personnel in the maintenance
and repair of the models covered in this manual. The technical information provided in this manual is a critical comple-
ment to operator training and operators should become thoroughly familiar with it.
This publication is for the exclusive use of those HUSQVARNA technicians who have an adequate basic mechanical
preparation and a good knowledge of the vehicles repair procedures. Thus much information has been intentionally
omitted as it was considered superuous. The technicians must adopt special safety procedures that they will deem
necessary in order to prevent damages to the motorbike, to its components, and to people.
For ease of understanding, diagrams and photographs are provided next to the text.
Notes with special signicance are identied as follows throughout the manual:
Accident-prevention rules for operator and persons working nearby.
Damage to vehicle and/or its components may result from incompliance with relevant instructions.
Additional information concerning the operation covered in the text.
Useful tips
To prevent problems and ensure effective service work, observe the following HUSQVARNA recommendations:
– before repair, evaluate the customer's description of the problem and ask the appropriate questions to clearly identify
problem symptoms;
– diagnose the problem and identify the causes clearly. This manual provides basic background information that must
be supplemented with the operator's expertise and specic training available through HUSQVARNA held at regular
periods;
– plan ahead before starting work: gather any spare parts and tools to avoid unnecessary delays;
– avoid unnecessary disassembly work to get to the part that needs repairing.
Always read the relevant instructions and follow the disassembly sequence outlined in this manual.

a.3
simbolo
NUDA 900 2012/2013 - NUDA 900 R 2012/2013
Workshop Manual Ed. 11-2011
FOREWORD, TABLE OF CONTENTS
NOTES
Unless otherwise specied, data and specications apply to all models.
Table of Contents
Title Section
Foreword, Table of Contents ...............................................................................a
Important Notices ................................................................................................b
General Information.............................................................................................A
Maintenance........................................................................................................B
Troubleshooting.................................................................................................. C
Settings and Adjustments................................................................................... D
General Procedures ............................................................................................E
Egine settings and adjustments...........................................................................F
General engine procedures...............................................................................F1
Cylinder head removal/disassembly..................................................................F2
Crankcase disassembly.....................................................................................F3
Engine torque gures ........................................................................................F4
Wear limits of engine parts................................................................................F5
Front Suspension .................................................................................................I
Rear Suspension.................................................................................................J
Brakes (NON-ABS Version - MY12 ONLY) .........................................................L
Brakes (ABS Version - MY13 ONLY).................................................................L1
Electrical System................................................................................................M
Engine Cooling................................................................................................... N
Tightening Torque Figures...................................................................................X
Chassis and Wheels............................................................................................Y