Hyperion 040-1001-HY-WH User manual

YPERl01�t

INSTRUCTION MANUAL
FOR THE
ROAD SNAPSHOT
AUTOMOTIVE DASH CAMERA
Dash Camera's Wifi Default Passcode : 12345678
04 0 - 1001 - H Y- WH
8 Questions ?
Call customer service hotline
877-456-7901.
SAVE THIS OWNERS MANUAL AND READ BEFORE USE.

CONTENTS
Important safety instructions & warnings--------------------------------------------------------------- 3
Product overview -- 4
Install the Hyperion® dash camera------------------------------------------------------------------------- 5
Recording modes and video files - 7
Viewing and managing videos by Hyperion® app------------------------------------------------ 8
Viewing and managing videos by pc or laptop -------------------------------------------------- 12
Upgrading the firmware------------------------------------------------------------------------------------------- 14
Troubleshooting--------------------------------------------------------------------------------------------------------15
Product specifications-------------------------------------------------------------------------------------------- 16
Customer support----------------------------------------------------------------------------------------------------- 17
Warranty - -- -- -- -- -- --------- -- -- -- -- -- -- -- -- -- -- -- -- ------ -- -- -- -- -- -- -- -- -- -- -- -- -- ----- 18
2

IMPORTANT SAFETY INSTRUCTIONS & WARNINGS
 

 Y  W 
 
 

 

 
 
 

 
 
 


 ® 

 
 

 
 

 ® 

3

PRODUCT OVERVIEW
Below is a list of items that should be included in your retail box:
A g
~
~
Ff~I
Q:;
~
!iii
I
~ ..
2 3 4 5 6 7
1) Dash Camera
2) Mounting plate of dash camera
3) 12V/24V USB charger
4) 16GB memory card and adapter
5) Micro USB cable for data transfer to computer or Laptop
6) Instruction manual
7) Quick guide
CAMERA FEATURES
• Side view
2
3
2
1)
Memory card slot
2)
Reset button
3) Micro USB Port-Plug in for getting
power or data transfer
4)
Power Indicator light
-Dash camera is powered ON
111111 Firmware upgrade in progress
5)
Camera mounting plate
1) Speaker- Outputs the voice notifica-
tion to indicate the product's status
2) Recording indicator light-
-Solid red- dash camera has been
turned on and is detecting the
memory card, but not recording
yet
111111 Flashing red- dash camera is in
recording
3) Wifi indicator light-
4
-Dash camera has been connected to
smartphone via Wifi

• Bottom view
1) Microphone- Used for voice recording
2) Sensor for gesture snapshot
1 2
INSTALL THE HYPERION® DASH CAMERA
1) Turn off the engine, gently push the
memory card into the slot until it locks
into place.
f3'NOTE:
ENSURE THAT THE MEMORY CARD
HAS BEEN INSERTED IN THE
CORRECT DIRECTION. THE METAL
CONTACTS ON THE MEMORY CARD
SHOULD FACE THE OPPOSITE
DIRECTION OF THE LENS.
2) Attach the mounting plate to the
camera by sliding the plate onto the
mounting tab on the camera until it
snaps into place.
3) Align the mount to the mount rail on
the product, and then slide it until you
hear a click ( ). Then, carefully
remove the protective film from the
lens (2).
4) Peel off the protective film from the
double-sided tape on the mounting.
plate (31 and attach the dash camera
to the windshield behind the
rear-viewer mirror (4 ).
5

5) Adjust the angle of the lens
by rotating the body of the
dash camera. We recom-
mend pointing the lens
slightly downwards (c=10°
below horizontal), so as to
record video with a 6:4 road
to background ratio.
6) Use a pry tool to lift the
edges of the windshield
trim/molding and tuck in the
power cord.
7) Plug the power cord into the
cigarette lighter socket and
the dash camera.
8) Turn on the engine. The dash camera will power on and start recording.
Video files are stored on the memory card. When the memory card fills up,
the newest video files will start to replace the oldest video files (called loop
recording) -so you will always have the most recent video files.
B'NOTE:
* THE LOCATION AND SPECIFICATIONS OF THE POWER SOCKET MAY
DIFFER BY VEHICLE MAKE AND MODEL.
* IN CERTAIN VEHICLES THE CIGARETTE PORT CONTINUES TO SUPPLY
POWER EVEN WHEN THE VEHICLES IGNITION IS OFF. IF YOUR VEHICLE
IS CONFIGURED LIKE THIS YOU WILL NEED TO DISCONNECT THE
CAMERA TO PREVENT THE VEHICLES BATTERY FROM DRAINING.
CHECK THE VEHICLES OWNER'S MANUAL FOR DETAILS.
* THIS DASH CAMERA SUPPORTS UP TO 64GB MICROSD MEMORY CARD
WITH A SPEED RATING OF CLASS 10, UHS-1 OR HIGHER.
6

RECORDING MODES AND VIDEO FILES
Your dash camera will automatically power on and start recording when it is
connected to a power source.
&CAUTION
Wait until the product is completely booted up after turning it on, and then
begin operating the vehicle. The video recording does not begin until the
product is completely turned on (booted up).
1) There are 3 recording modes of Hyperion® dash camera, as following:
Crash
detected Built-in G-sensor automatically records and locks video file when a
collision or crash is detected.
The videos will be stored in the" Event" folder.
The dash camera records seamless video clips automatically and
stored in the " Loop-record "folder.
Loop-recording Oncethe memorycard
is full. The dash camera overwrites olderfiles
Gesture
Snapshot
in orderto maintain uninterrupted recording.
During driving, use hand gesture as atriggerto capture asnapshot
on the road, and stored in the " Snapshot" folder
2)Video files storage locations
Videos are stored in the following folders of memory card according to their
recording mode.
IN THE MEMORY CARD
Event Loop-record Snapshot
< I
ll
• This PC • Memory card
.. I •tll
Pl
Name
This PC IDate modified IType l
s1ze
Windows ( C: )
IJ Event 2018/07/13
20:00 File holder 419,873 KB
Data ( D:)
I] Loop-record 2018/07/13
20:00 File holder 919,873 KB
Data ( E:)
Data { F:)
(I Snapshot 2018/07/13 20:00 File holder 219,873 KB
3) Video file name
A file name is composed of the recording start date and time.
yy
~
DD~
HH
~
ss
Event
EMER-
18 01 01 - 14 00 30 .mp4
Loop-record
FILE- 18 01 01 - 14
00 30
.mp4
Gesture Snapshot
IMG-
18 01 01 - 14 00 30 jpg
7

  
 
 
  
  
  








VIEWING AND MANAGING VIDEOS BY HYPERIONAPP
 ® 

 
   
 
 ® 
  
 
®  
 
  ® 
 
8
2
< -
 �
   

-




@ 4
HYPERI~· liYPER~Jf
Conn ect.d :HYPERION • 07
( Connect to Dash Cam --
~~ ~
R<opl ay Gallery Selling
i3'NOTE:
* DIRECT WI-Fl LETS YOU DIRECTLY CONNECT YOUR SMARTPHONE TO
YOUR DASH CAMERA VIA WI-Fl WITHIN A RANGE OF 10M.
* THE HYPERION® APP SUPPORTS DEVICES RUNNING ANDROID 4.4.2 AND
HIGHER, OR IOS 9.0 AND HIGHER.
MAIN SCREEN OF HYPERION'"APP (ANDROID/10S)
Realtime record display
Press here for replay
videos
liYPER~J:{
9
+- Recording indicator
Press herefor replay
snapshot
Press here to access
the menu

• Video replay
Hyperion® dash camera can record video under 2 categories:
1) Loop recording: The dash camera records seamless video clips automatically
Once the memory card is full. The camera overwrites older files in order to
maintain uninterrupted monitoring.
2) Crash detected: Built-in G-sensor automatically records and locks video file when
a collision or crash is detected.
Press here to display
the video list of loop
recording
The date of videos
been recorded
Press the icon to play
thevideo( 2 )
(In next photo)
Download thevideo
to smartphone
ii I •y Press here to select
,..• ___ Vld_eo_Rep_
1
•• __ """ __, J multi videos atthe
same time( 3 )
~ Press here to display
thevideo list of crash
detected
11111• 11aii md 4(--The bottom line to
2
10
show the resolution,
time length and size
of each video
Start to play the video
memorycard