Hypertec Ciara Astro PB60S User manual

Astro PB60S
User Guide

Astro SN-7375
- 2 -
9300 Trans-Canada Highway
Montreal, Quebec H4S 1K5
Tel : [phone]
Fax : [phone]
Microsoft, Windows 10 are registered trademarks of Microsoft Corporation
Intel and Core are trademarks or registered trademarks of Intel Corporation
Asus is a trademark of ASUSTeK Computer Inc.
All other names, brands, and trademarks are trademarks of their respective companies
Third printing December 2019
Printed in Canada

Astro SN-7375
- 3 -
Contents
ABOUT THIS GUIDE .......................................................................................................4
CONVENTIONS USED IN THIS MANUAL .........................................................................4
PACKAGE CONTENTS.....................................................................................................5
1- GETTING TO KNOW YOUR MICRO PC..................................................................6
1.1 –Features............................................................................................................................. 6
2- USING YOUR MICRO PC ........................................................................................9
2.1 - Getting started........................................................................................................................... 9
Mounting your PC on the stand........................................................................................................... 9
Connect the AC power adapter to your Micro PC............................................................................... 10
Connect a display panel to your Micro PC.......................................................................................... 10
2.2 - Connect the USB cable from keyboard or mouse ....................................................................... 12
2.3 - Turn on your Micro PC ............................................................................................................. 13
2.4 - Turning your Micro PC off ........................................................................................................ 13
2.5 - Putting your Micro PC to sleep ................................................................................................. 13
2.6 - Entering the BIOS Setup ........................................................................................................... 14
2.7 - Load default BIOS settings........................................................................................................ 14
3- UPGRADING YOUR MICRO PC.............................................................................15
3.1 - Removing the top cover ........................................................................................................... 15
3.2 - Replacing the top cover............................................................................................................ 15
3.3 - Installing 2.5” HDD or SSD........................................................................................................ 16
3.4 - Installing the M.2 SSD (on selected models) ............................................................................. 18
To install 2242 M.2 SSD..................................................................................................................... 18
To install 2280 M.2 SSD..................................................................................................................... 18
3.5 - Installing top memory module ................................................................................................. 19
3.6 - Installing an external button .................................................................................................... 20
APPENDIX ...................................................................................................................21
Safety information........................................................................................................................... 21
Setting up your system .................................................................................................................... 21
Care during use................................................................................................................................ 21
Regulatory notices............................................................................................................................ 22
CIARA Recycling/Takeback Services .................................................................................................. 22
COATING NOTICE.............................................................................................................................. 22
RF exposure warning ........................................................................................................................ 22
Federal Communications Commission Statement............................................................................. 23
ISED Radiation Exposure Statement for Canada ................................................................................ 23
Compliance Statement of Innovation, Science and Economic Development Canada (ISED)................. 23
Déclaration de conformité de Innovation, Sciences et Développement économique Canada (ISED) ... 23
Wireless Operation Channel for Different Domains ........................................................................... 24
ENERGY STAR complied product ....................................................................................................... 24
GLOSSARY...................................................................................................................25

Astro SN-7375
- 4 -
ABOUT THIS GUIDE
This manual provides information about the hardware and software features of your Micro PC, organized through the following
chapters:
Chapter 1 : Getting to know your Micro PC
This chapter details the hardware components of your Micro PC.
Chapter 2 : Using your Micro PC
This chapter provides you with information on using your Micro PC.
Chapter 3 : Upgrading your Micro PC
This chapter provides you with information on how to upgrade the memory modules, wireless modules, and hard disk drive / solid
state drive of your Micro PC.
Appendix
This section includes notices and safety statements your Micro PC.
Conventions used in this manual
To highlight key information in this manual, some text are presented as follows :
IMPORTANT ! This message contains vital information that must be followed to complete a task.
NOTE : This message contains additional information and tips that can help complete tasks.
WARNING! This message contains important information that must be followed to keep you safe while performing certain tasks and
prevent damage to your Micro PC's data and components.
Typography
Bold text indicates a menu or an item to select.
Italic This indicates sections that you can refer to in this manual.

Astro SN-7375
- 5 -
Package contents
Your Micro PC package contains the following items :
Micro PC PB60S
AC adapter Power cord
Technical documents
NOTE :
•The bundled power adapter may vary by model and territories.
•Some bundled accessories may vary with different models.
For details on these accessories, refer to their respective user manuals.
•The device illustration is for reference only. Actual product specifications may vary with models.
•If the device or its components fail or malfunction during normal and proper use within the warranty period, bring it to the
CIARA Service Center for replacement of the defective components.

Astro SN-7375
- 6 -
1- Getting to know your Micro PC
1.1 –Features
Front view
USB 3.1 Gen 1 port
The USB 3.1 Gen 1 (Universal Serial Bus) port provides a transfer rate up to 5 Gbit/s. These ports also support the
Battery Charging 1.2 technology that allows you to charge your USB devices.
NOTE : This port provides a maximum of 5V / 1.5A output.
Power button
The power button allows you to turn the Micro PC on or off. You can use the power button to put your Micro PC to sleep mode or
press it for four (4) seconds to force shutdown your Micro PC.
Air vents (intake vent)
The air vents allow cooler air to enter your Micro PC chassis.
IMPORTANT : For an optimum heat dissipation and air ventilation, ensure that the air vents are free from obstructions.
USB 3.1 Gen 1 Type-C™ port
This USB Type-C™ (Universal Serial Bus) port provides a transfer rate of up to 5 Gbit/s.
USB 3.1 Gen 2 port
The USB 3.1 Gen 2 (Universal Serial Bus) port provides a transfer rate up to 10 Gbit/s.
USB 3.1 Gen 1 port
The USB 3.1 Gen 1 (Universal Serial Bus) port provides a transfer rate up to 5 Gbit/s.
Headphone/Headset jack
This port allows you to connect amplified speakers or headphones. You can also use this port to connect your
headset or an external microphone.
Microphone jack
The microphone jack is designed to connect to a microphone used for video conferencing, voice narrations, or simple
audio recordings.

Astro SN-7375
- 7 -
Rear view
Wireless antenna jack
The jack is used to connect the supplied wireless antenna to enhance wireless signal reception.
Air vents (exhaust vent)
The air vents allow your Micro PC chassis to expel hot air out.
IMPORTANT ! For optimum heat dissipation and air ventilation, ensure that the air vents are free from obstructions.
CAUTION ! Be careful of the hot air expelled at the air vents as it may cause discomfort or injuries.
Punch-out port
By removing the cover screw, the user has access to the inside. He can then remove the cover of the punch-out port
and insert at his choice, an additional port that can be either VGA, HDMI, or Displayport or a serial port.
Power input
The supplied power adapter converts AC power to DC power for use with this jack. Power supplied through this jack
supplies power to the Micro PC. To prevent damage to the Micro PC, always use the supplied power adapter.
WARNING ! The power adapter may become warm to hot when in use. Do not cover the adapter and keep it away from your body.
USB 2.0 port
The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such as keyboards, pointing
devices, flash disk drives, external HDDs, speakers, cameras and printers.
DisplayPort
This port allows you to connect your Micro PC to an external display.
USB 3.1 Gen 2 port
The USB 3.1 Gen 2 (Universal Serial Bus) port provides a transfer rate up to 10 Gbit/s.
DisplayPort
This port allows you to connect your Micro PC to an external display.

Astro SN-7375
- 8 -
NOTE : This punch-out port let you install one of the following ports :
VGA port
This port allows you to connect your Micro PC to an external display.
Serial (COM) connector
The 9-pin serial (COM) connector allows you to connect devices that have serial ports such as mouse, modem, or printers.
DisplayPort
This port allows you to connect your Micro PC to an external display.
HDMI port
The HDMI (High Definition Multimedia Interface) port supports a Full-HD device such as an LCD TV or monitor to allow
viewing on a larger external display.
LAN port
The 8-pin RJ-45 LAN port supports a standard Ethernet cable for connection to a local network.
Kensington® security slot
The Kensington® security slot allows you to secure your PC using Kensington® compatible security products.

Astro SN-7375
- 9 -
2- Using your Micro PC
2.1 - Getting started
Mounting your PC on the stand
To mount your PC on the stand :
1. Locate the mounting holes at the bottom of your PC.
2. Align the stand’s mounting hole with the mounting hole on your PC, then secure it in place with the stand screws.

Astro SN-7375
- 10 -
Connect the AC power adapter to your Micro PC
To connect the AC power adapter to your Micro PC :
A. Connect the power cord to the AC power adapter.
B. Connect the DC power connector into your Micro PC’s power (DC) input.
C. Plug the AC power adapter into a 100V~240V power source.
NOTE : The power adapter may vary in appearance, depending on models and your region.
NOTE :
The power adapter may vary between models and territories, please refer to the following for more information on the different
adapters :
65 W Power adapter
• Input voltage : 100-240 Vac
• Input frequency : 50-60 Hz
• Rating output current : 3.42 A (65 W)
• Rating output voltage : 19 V
90 W Power adapter
• Input voltage : 100-240 Vac
• Input frequency : 50-60 Hz
• Rating output current : 4.74 A (90 W)
• Rating output voltage : 19 V
Connect a display panel to your Micro PC
You can connect a display panel or projector to your Micro PC that has the following connectors :
• VGA connector
• DisplayPort
• HDMI connector
NOTE : These ports may vary per model.
To connect a display panel to your Micro PC :
Connect one end of a VGA, DisplayPort, or HDMI cable to an external display, and the other end of the cable to your Micro PC’s VGA
port, DisplayPort, or an HDMI port.

Astro SN-7375
- 11 -

Astro SN-7375
- 12 -
2.2 - Connect the USB cable from keyboard or mouse
You can connect generally any USB keyboard and mouse to your Micro PC.
You can also connect a USB dongle for a wireless keyboard and mouse set.
To connect a keyboard and mouse to your Micro PC :
Connect the USB cable from your keyboard and mouse to any of the USB ports of your Micro PC.
NOTE : The keyboard varies with country or region.

Astro SN-7375
- 13 -
2.3 - Turn on your Micro PC
Press the power button to turn on your Micro PC.
2.4 - Turning your Micro PC off
If your Micro PC is unresponsive, press and hold the power button for at least four (4) seconds until your Micro PC turns off.
2.5 - Putting your Micro PC to sleep
To put your Micro PC on Sleep mode, press the Power button once.

Astro SN-7375
- 14 -
2.6 - Entering the BIOS Setup
BIOS (Basic Input and Output System) stores system hardware settings that are needed for system startup in the Micro PC.
In normal circumstances, the default BIOS settings apply to most conditions to ensure optimal performance. Do not change the default
BIOS settings except in the following circumstances :
• An error message appears on the screen during the system bootup and requests you to run the BIOS Setup.
• You have installed a new system component that requires further BIOS settings or update.
WARNING! Inappropriate BIOS settings may result to instability or boot failure. We strongly recommend that you change the BIOS
settings only with the help of a trained service personnel.
2.7 - Load default BIOS settings
To load the default values for each of the parameters in your BIOS :
• Enter the BIOS by pressing <F2> or <DEL> on the POST screen.
NOTE : POST (Power-On Self Test) is a series of software controlled diagnostic tests that run when you turn on your Micro PC.
• Navigate to the Exit menu.
• Select the Load Optimized Defaults option, or you may press <F5>.
• Select OK to load the default BIOS values.

Astro SN-7375
- 15 -
3- Upgrading your Micro PC
IMPORTANT!
•It is recommended that you install or upgrade the memory modules, wireless card, and solid state drive (SSD), under professional
supervision. Visit a CIARA service center for further assistance.
•Ensure that your hands are dry before proceeding with the rest of the installation process. Before installing any of the features in
this guide, use a grounded wrist strap or touch a safely grounded object or metal object to avoid damaging them due to static
electricity.
•
NOTE : The illustrations in this section are for reference only. The slots may vary depending on model.
3.1 - Removing the top cover
1. Turn off your Micro PC then disconnect all cables and peripherals.
2. Remove the screw from the rear (A), then push the top cover towards the front to remove the top cover (B).
3.2 - Replacing the top cover
Replace the top cover and push it towards the rear, then secure it with the screw removed previously.

Astro SN-7375
- 16 -
3.3 - Installing 2.5” HDD or SSD
1. Remove the four (4) screws, then lift the storage bay to remove it from the chassis.
2. Insert your HDD or SSD into the storage bay, then secure it with four (4) screws.
3. Connect the SATA cable to the HDD or SSD.

Astro SN-7375
- 17 -
4. Lift the flap on the SATA connector (A), connect the SATA cable to the SATA connector, then push the flap down to secure
the cable (B).
5. Replace the storage bay and secure it with the four (4) screws removed previously.

Astro SN-7375
- 18 -
3.4 - Installing the M.2 SSD (on selected models)
(optional) Remove the storage bay if a storage bay is installed. Follow step 2 under the Installing 2.5” HDD or SSD section to remove
the storage bay.
To install 2242 M.2 SSD
Align and insert the 2242 M.2 SSD into its slot inside the Micro PC, then gently push down the M.2 SSD on top of the screw hole and
fasten it using one of the bundled 3mm round screws.
To install 2280 M.2 SSD
1. Remove the stand screw and install it into the 2280 M.2 screw hole.
2. Align and insert the 2280 M.2 SSD into its slot inside the Micro PC, then gently push down the M.2 SSD on top of the screw
hole and fasten it using one of the bundled 3mm round screws.

Astro SN-7375
- 19 -
3.5 - Installing top memory module
IMPORTANT !
Refer to http://www.asus.com for the list of compatible DIMMs.
You can only install DDR4 SO-DIMMs to the Micro PC’s DIMM slot.
Only CIARA-authorized technicians should remove and install motherboard and mechanical parts inside your Micro PC. Please
refer to the terms and conditions in the warranty card.
Visit an authorized CIARA service center or retailer for information on module upgrades for your Micro PC.
1. (optional) Remove the storage bay if a storage bay is installed. Follow step 2 under the Installing 2.5” HDD or SSD section to
remove the storage bay.
2. Remove the two (2) screws securing the fan (A), then disconnect the fan connector (B) and lift the fan upwards so that it is
perpendicular to the heatsink (C), but do not remove the fan completely.
3. Align and insert the memory module into the slot (A) and press it down (B) until it is securely seated in place.

Astro SN-7375
- 20 -
3.6 - Installing an external button
1. Remove the metal cover of the external button port.
CAUTION ! Take extra care when removing the metal cover. Use tools such as a screw driver to bend and remove the metal cover to
avoid physical injury.
2. Insert the external button connector through the external button port and connect it to one of the following 2-pin headers :