Hyundai Fingercam User manual

7
HYUNDAIFingercam
User Manual

8
1. Structure Detail
I Characters of Product

9
zIt has small contou
r
desi
g
n, which does UV
spra
y
finishin
g
fo
r
the whole bod
y
.Itisver
y
fashionable and wearable and matches
with all kinds o
f
portable tools.
zSupports PC camera and chattin
g
function
zSupports AVI video format
zIt can carr
y
out hi
g
h definition ima
g
e
recordin
g
unde
r
low illumination
zSupports 30 fps fo
r
720*480 video shoot
and output
zSupports USB1.1 and USB2.0
zSupports 16 GB T-flash card
(
maximum
)
zBuild-in lithium batter
y
which can make a
video more than two hours, the standb
y
time is up to 250 hours
II Operation Guide
1. Char
g
e
The batter
y
is built-in lithium rechar
g
eable batter
y
,so
when
y
ou use it the first time, please char
g
efirstl
y
.The
method fo
r
char
g
in
g
as followin
g
:
1.
)
Connect computer: use USB cable to connect the
computer, then it can be char
g
ed.
2.
)
Use adaptor: connect char
g
e
r
plu
g
with USB cable,
then plu
g
into electrical connecto
r
receptacle, it can be
char
g
ed.
Notice: when batter
y
powe
r
is not enou
g
h, Fin
g
ercam
will ente
r
into protection mode, so it cannot be turn on.
Please char
g
efo
r
it now.
2.Powerontovideo
Press powe
r
button sli
g
htl
y
, blue indicato
r
li
g
ht be
g
ins
to bri
g
ht, now it enters into startup read
y
mode, which
can ente
r
into standb
y
mode quickl
y
. Press record/
stop button sli
g
htl
y
,blueindicato
r
li
g
ht be
g
ins to bri
g
ht,

10
red indicato
r
li
g
ht starts to flash slowl
y
. At this time, it
be
g
ins to make a video. The resolution fo
r
video file is
720*480, and frame numbe
r
is 29-30fps/s. Then short
press record/ stop button, video is stopped and saved
automaticall
y
. Afte
r
savin
g
the red indicato
r
li
g
ht
remains li
g
ht. I
f
y
ou need to continue to video, please
press record/ stop button sli
g
htl
y
once more.
Notice:
a. Please make sure T-flash
(
Micro SD
)
card has
been inserted, i
f
not, it will be powe
r
of
f
automaticall
y
afte
r
30 seconds.
b. The maximum capacit
y
o
f
T-flashcardis16GB.
c. Savin
g
file needs certain time, so please don’t
press operation button continuousl
y
in orde
r
to avoid
savin
g
unsmoothl
y
and
g
eneratin
g
incomplete file.
d. When
y
ou make a video, please focus on the
ob
j
ect and keep 50 cm unde
r
sufficient illumination.
Then the video will be ri
g
ht, natural color, clea
r
and
stable.
3. Sound control video
(
optional
)
Press powe
r
button sli
g
htl
y
, blue indicato
r
li
g
ht be
g
ins
to bri
g
ht, now it enters into startup read
y
mode, which
can ente
r
into standb
y
mode quickl
y
.Atthattime,
press MODE button sli
g
htl
y
, and then
y
ou can switch
into sound control video mode. Now blue indicato
r
li
g
ht
alwa
y
sbri
g
hts, red indicato
r
li
g
ht flash quickl
y
(
indicate
sound control standb
y
mode
)
. When decibel o
f
video is
more than 60, then it will be video automaticall
y
.Atthe
moment, blue indicato
r
li
g
ht alwa
y
sbri
g
hts, red
indicato
r
li
g
ht flash slowl
y
.
(
Indicate unde
r
sound
control video
)
When sound control starts, the shortest shoot time is 2
minutes. Afte
r
2minutes,i
f
thereisnoan
y
sound, the

11
Fin
g
ercam will save file automaticall
y
and switch into
standb
y
mode. I
f
there still has sound afte
r
2minutes,
the Fin
g
ercam will continue to shoot.
4．Power of
f
Unde
r
video mode o
r
standb
y
mode, please lon
g
press
powe
r
button 3 seconds, then release till indicato
r
g
oes
out. Then the machine is turned off.
5. Auto-power of
f
function
The Fin
g
ercam will save file and turn of
f
automaticall
y
as followin
g
:
a. When
y
ou shoot video without enou
g
hpower,
file will be saved automaticall
y
, then auto-powe
r
off.
b. When disk space o
f
the Fin
g
ercam is not
enou
g
h, afte
r
indicato
r
g
oes out immediatel
y
, file will
be saved automaticall
y
then auto-powe
r
off.
c. Unde
r
standb
y
mode, without an
y
operation in
45 seconds, it will be auto-powe
r
off.
6．Connecting computer
It can connects compute
r
unde
r
powe
r
of
f
mode,
standb
y
mode o
r
video mode, afte
r
that which can be
used as U disk, who can cop
y
, cut and paste, delete
file.
When
y
ou connect it with USB port, a portable disk
mar
k
will be seen afte
r
several seconds. Red indicato
r
li
g
ht alwa
y
sbri
g
hts, blue indicato
r
li
g
ht will be from
flashed quickl
y
to alwa
y
sbri
g
hts.
Notice:
a. When
y
ou connect computer, i
f
the machine
cannot be identified, o
r
not see the portable U dis
k
mar
k
in 30 seconds, please insert it a
g
ain.

12
b. It is bette
r
cop
y
o
r
cut video file into compute
r
hardware then pla
y
. Video file which is saved in the
machine is pla
y
ed directl
y
will cause unsmooth pla
y
,
the reason is that
g
i
g
antic data cannot be transmitted
s
y
nchronousl
y
.
7. PC Camera
When
y
ou first use PC camera, please install driver.
The drive
r
name is SPCA1528_V2220_M…Setup.exe,
whichisplacedinattachedCD.When
y
ou install
please double press this document, and as pe
r
g
uide
to do. Afte
r
that there will be an AMCAP icon on the
compute
r
desk.
Unde
r
powe
r
of
f
o
r
powe
r
on mode, use USB cable to
connect computer, the mode is U dis
k
mode. Then
short press MODE button, at this moment it can be
switched into PC camera mode. Then double press
AMCAP icon can be used as PC camera.
8．Reset
When machine works abnormal fo
r
ille
g
al operation o
r
othe
r
unknown reasons, it needs to be reset. The
specific operation method as followin
g
:
Use slim pole to press the reset button, and then finish
one reset operation.
9. Char
g
e
Three times before char
g
in
g
to char
g
emorethan12
hours, make the batter
y
to achieve maximum
efficienc
y
.
Start char
g
in
g
, red indicato
r
li
g
ht often bri
g
ht and blue
indicato
r
li
g
ht flashin
g
slowl
y
. When char
g
in
g
3~4
hours continuousl
y
full
y
char
g
ed blue indicato
r
li
g
ht are
often bri
g
ht.
10. Notice

13
Suitable usin
g
situation: Please follow State's law.
Do not use it ille
g
all
y
.
Work temperature: Please use it unde
r
normal
temperature and avoid usin
g
unde
r
unsuitable bod
y
temperature.
Work humidit
y
:Please use it unde
r
a
g
reeable human
atmosphere humidit
y
. Please don’t make the product
wet o
r
exposeinrainfo
r
which without waterproo
f
function.
Shootin
g
illumination: Please use it unde
r
enou
g
h
li
g
ht sources; do not aim the camera at the sun and
othe
r
stron
g
li
g
ht sources in orde
r
not to dama
g
e
optical parts o
f
an apparatus.
Cleanin
g
requirements: Please don’t use the product
unde
r
too lar
g
e dust densit
y
atmosphere so as not to
affect video effects fo
r
tainted lens and othe
r
parts.
Waste treatment: Please pa
y
attention to protect
environment, not to throw the product optionall
y
.In
orde
r
to avoid explosion, please not throw product into
fire.
Please don’t film and take pictures o
f
othe
r
persons
without thei
r
permission.
Fo
r
more information please visit www.m
y
-h
y
undai.de

HYUNDAI MC1010 Mini video camera II Using your HYUNDAI MC1010 mini video camera
Operating instructions 1. Charging the attery
Charge the battery fully before using the camera for the first time.
I Description of your Hyundai MC1010 mini video camera Connect the camera to your computer using the USB cable -
this will begin charging the battery.
Supports AVI Video Format. Do not overcharge the battery –
High Definition recordings/photos can also be taken in disconnect the camera from the computer after two hours.
poor light conditions with 30 fps at 720*480
Supports USB1.1 und USB2.0.,
Memory ard slot for a 16GB Micro SD card (maximum) The camera turns off automatically if the battery charge is too low.
It will only turn on again after a complete charge.
II Using your HYUNDAI MC1010 mini video camera
2. Setting the video function
ress the on/off button. The yellow light will illuminate and the camera is now in standby mode. ress the "Change mode" button. The yellow light will flash three times and go out.
Video recording will start from this moment. To stop video recording: press the "Change Mode" button again and the yellow light will illuminate. Video recording has now stopped. To start recording again
follow the steps as described above. Remember: a. Make sure that the Micro SD card is inserted, otherwise the camera will automatically turn off after 15 seconds.
b. The maximum supported Micro SD card capacity is 16GB.
c. Saving data may take some time. Therefore do not press any button during this time or data may be lost.
3. Photo function
ress the "On/Off" button. The yellow light will illuminate. The camera is now in start mode. Now press the "Change Mode" button briefly. The yellow light flashes to show that a photo has been taken. ress
the button again to take another photo.

4. Turning off & automatic shutdown:
Hold the On/Off button until the status light goes out. The HYUNDAI MCM1010 is now tu ned off.
The HYUNDAI MC1010 will shut down automatically in the following ci cumstances: a. If the batte y is low. The HYUNDAI MCM1010 mini video came a will stop the cu ent
eco ding and save it automatically.
b. If the e is not enough sto age space on the memo y ca d to continue. The HYUNDAI
MC1010 will then save the eco ding automatically and shut down.
c. If the came a is in "Standby Mode". The came a will shut down automatically afte a
pe iod of inactivity longe than app oximately 45 seconds.
5. Playback
To play back you eco dings, connect the came a to you compute using the USB cable included. The came a will be ecognised automatically th ough Plug & Play and the
di ecto y will appea . This is whe e all you films and photos have been saved.
III Faults
Should the came a develop a fault, e.g. the light is continually illuminated and the came a will not tu n off, emove the memo y ca d and p ess the "Reset" button on the left
side of the casing with a pape clip o needle. Replace the Mic o SD ca d and tu n the came a on again. The "Reset" button is located between the USB output and the memo y
ca d slot. You can find more information under www.my hyundai.de.